Circular Vibrating Screen / Pre-Screen

Kleemann VU1S 1240ST

Condition: good (used), Year of construction: 1998, functionality: fully functional, pressing force: 35 t, working width: 2,000 mm, pressure 35to max. bending length 2000mm arrester behind Csdpfswagykox An Nsgu drive capacity 4,5 kW weight 3000kg

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg Codpfotzf N Rex An Negu

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Cgsdpfx Asd Nwk Usn Nou Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Cgjdpfxsv Amw No An Nju Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Cgjdpfx Anstvau As Nsu Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: new, Year of construction: 2025, machine/vehicle number: 381201764, Gasparin GI118CV OLIMPO mobile jaw crusher on crawler track The pure power expressed by OLIMPO thanks to the crusher 1100x800 is the ideal condition for a specific machine for the professional in quarrying and recycling. An uncompromising machine whose design has taken into account the requirements in terms of use, productivity, effortless maintenance and transport. Equipped with control and operating systems of the latest generation, it is simple and user-friendly and at the same time environmentally friendly. The HCS (Hydraulic Crushing System) control system actively supports the automatic operation of the machine, guaranteeing it the highest profitability in terms of maintenance costs and productivity, making it incomparable. The structural reinforcement between the frame and the crusher gives the machine maximum robustness to stresses. The particular design of the supporting structure guarantees excellent access to all parts of the machine during maintenance operations. The OLIMPO crusher is sure to offer convincing and incomparable performance in natural stone, recycling and and for rentals, the OLIMPO crusher offers a convincing and incomparable performance. Production capacity: approx. 360 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction of fuel consumption by approx. 30%. Pre-screening optional gap size hydraulically adjustable also during crushing operation fast blocking system with wedges and folding cylinders unloading height 3200 mm dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 1100 x 800 mm crushing gap from 50 to 200 mm Cgedpfehd I U Eex An Neu feed hopper 5 m³ - 2000 x 3970 mm , foldable to transport dimensions two-deck vibrating screen 1020 x 2000 mm Main conveyor belt 1000 x 11000 mm 4 cylinder constant speed diesel engine 82 HP/60 KW , exhaust gas stage V Control panel chain drive 450 x 3800 mm Weight: kg transport length 13850 mm Transport width:2550 mm Transport height 3390 mm More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: used, No. 10019 Various conveyor belts Used Consisting of 8 positions Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 3: Blue conveyor belt, approx. 13000 x 1000 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Pos. 9: Green garbage truck loading conveyor belt, approx. 5000 x 1000 mm LW, at the height of a garbage truck to load it with garbage Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Csdpfx Anjwhp H Ns Nsgu Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, The folding gitterbox by Mega-M is made of steel wire mesh that is resistant to mechanical damage. It is protected by a galvanic coating that protects the metal from corrosion. The metal basket has a hinged lid on the long side, which guarantees convenient access to the stored goods. The basket container is used for transporting and storing goods. It is also used for transporting and displaying wine bottles. Advantages of the Gitterbox Mega-M basket: - High durability and resistance to external factors. - Stackable up to 4 pieces. - Easy access to stored goods thanks to the hinged lid on the long side. - Maximum load capacity of up to 1,500 kg. - Extensive use in a variety of industries. - Possibility of storing and transporting goods without the use of EURO pallets. - Small dimensions when folded save storage space. The offer concerns the gitterbox: Product code :MTP001422. Height (cm): 89 Width (cm): 120 Depth (cm): 100 Load capacity (kg): 800 Finish: Galvanised Net price: EUR 65.00 per item The offer applies to the gitterbox mesh container: Stock code: MTP001419. Height (cm): 98 Width (cm): 125 Depth (cm): 105 Load capacity (kg): 500 Finish: Galvanised zinc plating Net price: EUR 94.00 per item The offer applies to the gitterbox mesh container: Stock code: MTP001420. Height (cm): 98 Width (cm): 114 Cgjdpfxju Tr Amo An Neu Depth (cm): 84 Load capacity (kg): 800 Finish: Galvanised zinc plating Net price: EUR 97.00 per item The offer applies to the gitterbox mesh container: Stock code: MTP001421. Height (cm): 102 Width (cm): 120 Depth (cm): 90 Load capacity (kg): 800 Finish: Galvanised zinc plating Net price: EUR 105.00 per item The offer applies to the gitterbox Article code: MTP001400. Height (cm): 91 Width (cm): 120 Depth (cm): 100 Finish: Galvanised Load capacity (kg): 1500 Net price: €123.00 per item Prices quoted are for wholesale quantities ( full truckload ) for export outside Poland, please contact us for details. To check wholesale and retail prices within Poland, please contact us. * I have large quantities ... * Transport throughout Europe possible. * The aforementioned offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: new, functionality: fully functional, Year of construction: 2025, New mobile concrete batching plant from BLENDPLANTS. Fully automatic, computer-controlled concrete mixing plant for continuous mixing of: - Concrete - Polymer concrete - Flowable fill - Soil stabilization - Cold asphalt Cgedpfstzk Tzox An Nou On-site concrete production instead of ready-mix delivery! Produce only as much concrete on site as you need! No residual quantities, no wasted raw materials! Various machine sizes available: - Feed capacity from 3.5 m³ to 15 m³ - Output rates up to 70 m³/h for this size (E-Series), up to 120 m³/h for the A-Series - Batch production starting from 100 kg - Mobile or stationary versions - Diesel or electro-hydraulic drives BLEND Automation: - Recipe management - Delivery note printing - Data export via USB - Remote access We are the exclusive BLENDPLANTS.com representative in Germany. Contact us – we will be glad to provide you with a customized offer. Occasionally, we also have used machines available! Please ask!

Condition: new, Field of application: Construction Attachment suited for: Loaders Selling price: € 1.000, US$ 1.047 Loader Bucket High Dump-Side Dump Bucket Mining Bucket(Push Blade) Coal Bucket Cjdpfx Anspa Rnts Negu Side Dump Bucket Block Bucket Grading Bucket Flat Floor Bucket Price is representative. For detailed information, please contact us