KSB Etanorm MX 100-200, John Deere 4045,

KSB ETANORM MX 100-200 MX 10

Year of construction: 2022, condition: as good as new (ex-display), Air handling unit with EC technology for hall climate control or heating, cooling capacity in conjunction with a chiller system of 150 kW at 7/12°C, heating capacity 300 kW, air flow rate 20,000 m³/h, 4 x 500 mm air outlets, compact design. Pjdpfx Aofzrgysbujgu

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Psdpfx Abjy Iplfsujgu Very little use Ex Pharma Facility

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Pgjdpfx Abexlngasuju Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump. Pedpfx Abjfupadouogu

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Pgedpfxoinur As Abuju Power: 11kW

Condition: used, Year of construction: 2008, Power (KVA): 1700 Pgedeyznrdepfx Abuou Working hours: 575 Frequency: 60 Hz

Condition: like new (used), Year of construction: 2026, power: 286 kW (388.85 HP), fuel type: diesel, rotational speed (min.): 1,900 rpm, Technical Data for Deutz Engine Type BF6M1015C General Specifications Number of Cylinders: 6 Bore/Stroke: 132 mm / 145 mm Pedpoyzaaysfx Abuogu Displacement: 11.91 liters Compression Ratio: 16.5 Max. Rated Speed: 2100 rpm Mean Piston Speed: 10.15 m/s Power Ratings for Construction Equipment Engines Group I: Power: 300 kW Speed: 1900 rpm Mean Effective Pressure: 14.4 bar Group III: Power: 273 kW Speed: 1900 rpm Mean Effective Pressure: 13.1 bar Additional Parameters Max. Torque: 1980 Nm At Speed: 1200 rpm Minimum Idle Speed: 550 rpm Weight (to DIN 70020, Part 7A): 850 kg This summarized technical data provides a comprehensive overview of the BF6M1015C engine’s specifications and performance ratings.

Condition: like new (used), Year of construction: 2014, operating hours: 9,000 h, functionality: fully functional, type of input current: three-phase, type of cooling: water, overall weight: 1,404 kg, input voltage: 400 V, total width: 2,950 mm, total length: 922 mm, total height: 2,000 mm, empty load weight: 1,404 kg, (offer: price already reduced by 20%) used water chiller, second-hand completely revised. - brand: Carrier. 162 kw water-water system (139320 frigories). model: 30RW-160-A0178-PE-.gas R407C. 4 scroll compressors and 2 water pumps. 2 plate exchangers. Consumption 63 KW. Equipment reviewed and with its factory gas reference: 1060 Only 9000 hours of compressor use. Pgedpfx Abevpg Arjuju

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice Pjdsvpfzyjpfx Abusgu *

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031 Pgodownn S Rjpfx Abuju