Ploughshare mixer

Lödige FM 50 1 MZ

Condition: new, Year of construction: 2025, The Hight Speed Mixer SPT-SHM series are used to mix dry powder for tablets and capsules and can be also used for wet granulation (pre-stage to tablet and capsule powder). All product touching parts are made out of SS 316L steel. Ndsdpoh Im D Tjfx Ah Sec Others are out of SS 304. The machines are conform to GMP standards and CE certificated. The output of the machine depends on the product.

Condition: good (used), Year of construction: 1974, This mixer was designed for intensive mixing and wet granulation of materials such as powder / granulate. Ndedpfx Ajwa Tcfoh Soc Working volume: 63 - 200 liters Total volume: 250 liters Cutter head: 4.9 / 6 kW, speed 1,500 / 3,000 min¹ Mixing tool: 18,5 kW, speed 2 speeds Manufacturer: Lödige Year of construction: 1974 Floor Space: 200 x 110 x 145 cm

Condition: used, Used Lödige model FKM 1600D stainless steel ploughshare mixer. Unit has an approximately 1600-litre total capacity and 550-1100 litre working capacity. Ploughshare mixing blades direct driven by 21-35 kW 400 volt 3/50 740-1479 rpm motor through Flender type 185 102 025-2-1 gearbox rated 31kW with 1500rpm input and 115rpm output. Unit has (2) MK 30/55 choppers with air purged seals driven by 5.5kw motors. Has (2) side inspection doors and pneumatically operated drop door discharge. Ndedpfxjzn Nmye Ah Soc

Condition: good (used), Silverson EX High shear mixer on stand Ndodpfx Aezvli Toh Ssc Stainless high shear mixer on stand, 3Kw, 750mm shaft length, high shear diameter 105mm, 3Ph

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Nodeymayiopfx Ah Sodc Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Single-Punch Tablet Press Model CPR1 The CPR 1 benchtop press is a single-punch machine designed for tablet production. Powder is loaded into a hopper and directed through a stainless steel tube into the die cavity. The adjustable punch compresses the powder, and the finished tablet is ejected from the machine. The press operates with a continuous motion utilizing cam disks. An operator panel equipped with a tablet counter is included. The machine is capable of producing up to 3,000 tablets per hour. The tablet press can be fitted with tooling for round, oblong, or oval tablets. Punch and die changes can be carried out simply and quickly. All product-contact parts are made of AISI 316 stainless steel. Technical Data Machine dimensions CPR1: 350 x 500 x 720 mm Net weight CPR1: 80 kg Electrical connection: 1 Ph. 230 V. 50 Hz Nedpfeykukqox Ah Ssdc Electrical power: 1.20 kW Tablet output: max. 3,000 tabs/h Tablet size range: 4–20 mm

Condition: used, Used Vrieco approximately 300 litre capacity stainless steel conical mixer. Mixing cone measures approximately 1,200mm top diameter x 1,500mm high. Has top mounted electric drive / gearbox for stainless steel screw and stainless steel orbit arm. Has bottom outlet with valve. Unit is mounted in stainless steel frame with (4) legs. Specifications: Diameter Of Top: 1,200mm Jacket (Y/N): N Power: 3 kW Capacity: 300 Litre Ndedpfx Ahezindmj Sec

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 Pharma Universal Mixer / Granulator Year of manufacture 2007 | Double-jacketed for heating/cooling | ATEX | Siemens PLC Manufacturer: DIOSNA Dierks & Söhne GmbH Type: V50 Machine No.: 383-001 Year of manufacture: 2007 High-quality DIOSNA V50 Universal Mixer / Granulator in exceptionally good used condition. The product-contacting interior as well as the mixing and chopping tools are in very good condition and appear almost new. SPECIAL FEATURE – DOUBLE JACKET: The mixing container has a double-walled design and enables the heating or cooling of the mixing material. This allows the product to be temperature-controlled during the mixing or granulation process. Technical data: - Container volume: 52 l - Usable volume: 46 l - Machine weight: approx. 200 kg - Compressed air supply: 7–10 bar - Voltage supply: 3/PE 400 V / 50 Hz - Fuse rating: 25 A slow-blow Mixing tool: - One-piece 3-blade mixing tool - Runs close to the bottom - Frequency-controlled three-phase geared motor Ndjdozxq U Hspfx Ah Soc - Power: 4.0 kW - Max. synchronous speed: 495 rpm - Protection class drive: Ex II 2G / IP65 Chopper: - Located on the side in the container housing - One-piece 2-blade tool - Two-stage drive - 1,500 / 3,000 rpm - Power: 1.1 / 1.9 kW - Protection class drive: Ex II 2G/3D / IP66 Equipment: - Double-walled mixing container for heating/cooling - Fully hinged, dust-tight lid - Inspection flap with wiping device - Filter - 1.5" Tri-Clamp connection - Side product outlet with manually operated shut-off piston - Safety monitoring of lid and outlet - Air gap seals for mixer and chopper - Mobile stainless steel frame Control: - Siemens SIMATIC S7-200 PLC - Siemens TP177B touch panel - Manual and automatic operation - Recipe management - Multi-phase process control - Display of mixer speed, power, product temperature and chopper speed - Trend and alarm message display Particularly suitable for intensive mixing and homogenizing of powders, as well as for granulation and agglomeration processes. Original DIOSNA operating manual and control documentation available. Inspection and functional test possible by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Subject to prior sale and errors.

Condition: new, Brand new PERRYmix model HVP 600 stainless steel conical mixer for gentle powder mixing: - Maximum working volume of 600 litres. - 1 pc half-circle top cover bolted to the vessel with round feeding inlet equipped with safety mesh and the lid. - 1 pc half-circle top cover bolted to the vessel - Screw agitator supported by bottom pintle bearing (hardened metal), adjusted for quick removal of the screw. - Inner surface polished Ra ≥ 3.2 / outer surface bead blasted. Ndjdpezbubwofx Ah Sec - Manually operated rotary slide outlet valve with conical discharge. - Mounted on 3 lugs. - Standard non-ATEX atmospheres Drive: - Screw agitator driven by 2.2 kW electric motor via NORD gearbox. - Swing arm driven by 0.37 kW electric motor via NORD gearbox. Material design: - Product contact parts manufactured of AISI 304 / DIN 1.4301 stainless steel (beam, conical vessel, mixing screw, vessel lid, product outlet and hopper). - Cast carbon steel arm - painted with FDA paint. Options: - Cast stainless steel arm. - Product contact parts made of AISI 316 stainless steel - Custom designed top lid (hinged covers, various filling connections etc.). - Drives and gearboxes for potentially explosive atmospheres. - Pneumatically controlled discharge valve. - Stainless steel legs. (Disclaimer: Attached photos shows improved design of HVP 300 with stainless steel arm and tilting half-circle top cover)

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 TECNOMACO ITALIA S.r.l. – FAMAR AP60 Italian Blister Packaging Machine Year: 2002 Nodpjzvycnsfx Ah Ssdc Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.