Fabric cutting machine

Lectra Q25

Condition: excellent (used), functionality: fully functional, APV / RANNIE 30.60 ID.NO. 2802 Apv / Rannie mod 30.60 homogenizer for the production of e.g. Mustard, Sauces, Mayonnaise etc. Capacity approximately 2000 lit / hour, Max pressure 220 bar year mod 1994. Guedpfxsumbwnj Al Doh Dimensions 130 x 90 cm Height 145 cm.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, A set of machinery for garment manufacturing in very good condition and with little use. A list of the machinery is attached. Interested parties should send an email for more information. Gedpfx Aey Ickzol Djuh JUKI MP200NS DURKOPP-ADLER 550-8-3 BROTHER 311HN COMEL MP/A COMEL BR/A/AC SIRUBA L382R-32 STEAM KIT SIRUBA 737K504 ROBOTEC 3300 MAIER 221-12-K-E MAIER 221-19/2-K SIRUBA 1381P DURKOPP-ADLER 173 ROTONDI VFRVE203 ROTONDI BL32 ROTONDI BL32

Condition: used, Year of construction: 2007, functionality: fully functional, Lectra VT-FA-MH-71 cnc cutting machine width:170cm length:185cm outfeed belt: 200cm Max. cutting height: 5 cm Gjdpfswzxz Nsx Al Dsuh cnc control

Condition: used, Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: G300L321302, cutting length (max.): 3,200 mm, type of input current: three-phase, input current: 32 A, input voltage: 208 V, table width: 1,800 mm, table length: 3,200 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer a Zünd L-3200 machine, type: paper cutting machine, year of manufacture 2022. Product: Cutter G3 Godpfx Aeymdb Djl Deuh Type: L-3200 Year of manufacture: 2022 Serial number: G300L321302 Country of origin: Switzerland Voltage: 208/400 V AC 3-phase Current: 32 A Frequency: 50–60 Hz If you have any questions or require additional information, please send us a message or contact us by phone. The complete specification is available upon request. The machine is practically new (1000 hours).

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, inner diameter: 365 mm, wall thickness: 10 mm, rotational speed (max.): 2,900 rpm, The GEA Westfalia Separator CA 365-03-00 is a high-performance three-phase decanter designed for the efficient separation of liquids and solids. With a drum diameter of 354 mm and an extended drum length this model offers optimized separation performance. DRUM AND HOUSING DESIGN The decanter drum is configured in a flat-cone design, enabling effective phase separation. The housing is manufactured in a standard design, facilitating integration into existing systems. LIQUID DISCHARGE Liquids are discharged with the light phase unpressurized and the heavy phase under pressure. This functionality ensures reliable and continuous removal of the separated phases. DRIVE TYPES The drum is driven via a belt drive, while the screw is driven by a gearbox. These drive types provide stable and efficient decanter operation. Gsdpfxjy H Ixus Al Douh The GEA Westfalia Separator CA 365-03-00 provides a reliable solution for the separation of liquids and solids in various applications plus GEA WESTFALIA SAMR 5036 CENTRIFUGE CLARIFIER FOR A COMPLECT LINE FOR OILS units can be sold separate or as a complecte line ?v=nv23KAJFewE

Condition: used, Used GEA Westfalia model SC 6-01-576 stainless steel disc bowl separator. - Manufacturer: GEA Westfalia - Model: SC 6-01-576 - Permissible density of product to be treated: heavy liquid phase 1.1 kg/dm3 and solid phase 1.4 kg/dm3 - Maximum speed rated: 11.970 rpm. - Drive: flanged electricmotor with coupling 5.5 kW, 1740 rpm, 50 Hz, Ex II 2 G rating Gusdpfx Aljzbucuo Deh - Included: switchboard with control panel - Mounted on a skid

Condition: like new (used), Year of construction: 2018, operating hours: 900 h, Lectra IQ80 cutting machine, year 2018, max cutting thickness 8 cm, working width 180 cm, 900 operating hours. Machine in excellent condition. Godpfxjycqcto Al Djuh

Condition: used, Year of construction: 1987, Nominal width: 2100mm, weft insertion system: flexible rapier, max. weft colors: 8, max. machine speed: approx. 320rpm, max. weft insertion rate: approx. 650m/min, dobby type: Stäubli 2600, max. frame capacity: 20, max. warp beam diameter: approx. 800mm. Overall dimensions: approx. 3950mm/1950mm/1850mm, machine weight: approx. 3200kg. Inspection possible by arrangement. Guedpfxjzun Tle Al Doh

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Gusdezhntrepfx Al Doh

Year of construction: 2026, condition: new, DESCRIPTION Horizontal drum chipper, engineered and built for maximum performance and reliability. This heavy-duty, robust machine is suited for the most demanding conditions and is ideal for processing all types of waste wood materials. The Varli VDC-1600 drum chipper features a large infeed opening, making it highly capable of processing waste wood material, logs, and wood bundles (diameters over 700 mm can be easily accommodated). Gjdpfxjyi H Rye Al Deuh The VDC-1600 can achieve outputs of approximately 100,000 kg per hour of high-quality pulp mill chips or finer fractions suitable for biofuel production. The chipper can also deliver coarser fractions, producing chips up to 200 mm in length (depending on configuration). Built with a heavy-duty frame, the chipper features over-sized, self-aligning bearings housed in steel casings, firmly secured to the chipper’s side structure for long service life and reliable operation. Equipped with 14 feed rollers fitted with special, wear-resistant, surface-hardened teeth, the VDC-1600 provides secure feed and optimised material throughput. The chipper comes standard with drum-mounted cutting tools made from Hardox, along with replaceable wear plates. OPERATING PRINCIPLE The VDC-series is designed to produce wood chips from logs or bark bundles. Material is horizontally fed by vibrating chute into free-floating feed rollers, which automatically adjust to the material’s height. The feed rollers securely grip and transport the material into a high-speed rotating drum armed with solid knives, fixed with centrifugal wedges—fostering durability, preventing knife damage, and minimizing downtime during tool changes. The rotor knives are easily accessible and can be re-sharpened multiple times. Key features include an adjustable stator knife, hydraulic hood, and hydraulic device for stator knife exchange. BENEFITS - Extremely robust construction and heavy-duty design for stable operation - Centrifugal wedge knife mounting for reduced machine downtime - Adjustable stator knife to extend operating life - Hydraulic hood for swift and easy maintenance TECHNICAL DATA Model: VDC-1600 Infeed Width: 1250 mm Rotor Diameter: 1600 mm Number of Infeed Rollers: 14 Number of Cutting Tools (Knives): 4 Drive Motor(s): 2 x 400 kW Electrical Supply: 400V, 3Phase, 50Hz Fraction Output: 60 mm (SPF), approx. 100,000 kg/h Total Weight: 96,000 kg