|
3
High-quality leather sharpening machine on a sturdy bottom table, 380 V, can be inspected and demonstrated. Riuvzeo more
|
|
5
Wiefelstede, Germany
dealership location
6377 km
used
consisting of: -Machine Takaoka world M-5 (not may) Working width 2000 mm -without tables -Cutter Fabr. Kuris, swiveling Roll tape knife Bfgeivaijt more
|
|
11
Wagenfeld, Germany
6436 km
1984
excellent (used)
1 drum washing machine EUR 16.000,- ex works Milnor, year 1984, type 3BO60044 WED, bisected drum, Bfgck832xe drum dia. 1.500 mm, drum length inside 1,11 m, capacity 200 kg, program card control, heated by steam, very good condition, only few production hours, complete with tanks out of stainless steel and pump more
|
|
4
PRESS FARELL 100 TONS FOR WOOL... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... 0, 8 M 3, HIGH PRODUCTION 900 KG HOUR, WITH HIS OWN STORAGE MATERIAL FILTRED, FILTRET ACROSS TO CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORVED BY THE CONDENSER... REALLY GOOD AUTOMATIC INSTALLATION. Bpoh98xw more
|
|
4
SEINÄJOKI, Finland
6703 km
1999
excellent (used)
Tester is based on the APPITA method and conforms with BRITISH, ISO, SCAN, TAPPI, M&S and other National and International standars. Two pendulums light A tearing strength capacity 8000 nM and medium B 16000 nM Nl7q2 Transportation include the price. more
|
|
4
Pocking, Germany
6941 km
2007
excellent (used)
Indupress, tunnel finisher IPN-TFS-Holstein-feeding conveyor, and contributions, very good condition, just a few hours (hours of operation: 1651 h / total counter: 617193 piece). Self and self dismantling factory Pocking (at Passau / Bavaria) Nkwi7 more
|
|
3
Material width: max. 1700 mm Rolling 1 D: max.1200 mm Unrolling 2 D: max. 1000 mm Rolling 3 D: max. 500 mm Winding 1,2,3 per D: max. 700 mm Working speed: max. 100 m/min Ylghqlsr Cutting width: from 30 mm Paper and foil thickness: min. 30 my Paper and film thickness: max. 1000 my Accessories: - Flattening 1+2 with edge control - any flattening and pneumatic clamping axle D 76 mm - Pressure roller, heatable 50°C-150°C - Laminating roller, heatable 50°C-150°C - Wide stretch roller... more
|
|
8
Wagenfeld, Germany
6436 km
1999
excellent (used)
1 Shaker HDB, year 1999 EUR 18.000,- loaded ww 2.000 mm, with condensor, shutfeeder, exhaustor, for dedusting and opening wool Bfgcfaflgq very good condition, production 750-1.500 kg/h more
|
|
12
Scouring / Washing plant composed 1 opener /charger at entry 5bath with their own press and recicled wáter discharge automatic of sludge in bath 1 replacement automatic of wáter controled by you in bath 1 and 5 system to reclicling wáter from bath 5 to 2 automatic dosification of soap and carbonate in bath 1,2,3 ,4 Rtec8pir automatic control of temperatura in each bath automatic stop/ start control in order to avoid wool colapse in bath or dryer in the outside of bath 5 there are a... more
|
|
7
SEINÄJOKI, Finland
6703 km
1990
repair required (used)
Bemmhr3n3t Dürkopp Adler 745 speed pocket automatic. The machine is in good condition, but the engine must be replaced more
|
|
3
Bad Abbach, Germany
6829 km
2016
good condition (used)
The Eton system for apparel industries is a flexible material handling system designed to eliminate manual transportation and minimise handling. It increases productivity radically, ensures an optimal working flow and provides time for adding value to your products. Technically the system consists of overhead conveyors with individually addressable product carriers, automatically finding its way to the correct operation. It is monitored by a computer providing all necessary data for meas... more
|
|
5
Max. stitching output: 500/min, max. material thickness: 18mm, max. working width: 2870mm. Befycs2oex more
|
|
7
Wagenfeld, Germany
6436 km
1999
good (used)
4 HDB exhaustors/fans, 1999 each EUR 2.500,- loaded high capacity for pipes 350-400 mm, Bfgcbegccd with motor 22 kW, 380V/3PH/50Hz more
|
|
6
Rotthalmünster, Germany
dealership location
6938 km
good (used)
W77y0y3v 1 piece very good old textile machine knitting machine MW probably built in the thirties (jewelry) Very good condition. Manufacturer: Barber Colman in Rockford.Ill. USA Model: MW MS 9 Table set with electric motor Engine specifications: 115 Volt Amp. 0.95 0.2 HP 4000 rpm controllable Accessories: Transformer; pri. 240/480 volts sec.120 / 240 Voilt KVA 0.150 50/60 Hz Sheet metal transport trolley mobile. more
|
|
8
SEINÄJOKI, Finland
6703 km
repair required (used)
Rimoldi 063 1N + RITA 3 1 1380€ Rimoldi Orion 1 150€ Rimoldi Vega 3+2 heads 450€ Yamato AZ8020-Y5DA/ADTJ 3 380€ Yamato VCU and VU 2 heads 60€ Rimoldi Lisa band feeders 2 80€ Tomoe Tagtack ... more
|
|
4
Bad Abbach, Germany
6829 km
excellent (used)
3 layer tables with air cushions Feeder function over 5 levels Connection Cutter Pathfinder K3180 Material width: 1800mm Table width 2000mm Max bale weight 25kg Max bale diameter 400mm Layer height 40mm Positioning speed 110m/min Shortest layer length 400mm Power connection 230V/50Hz Cutting units 1 piece with roller scissors Bffdbtoeoe Rails and power supply: 1515m 10 plus 5m power rail 15m two-sided rail set 15m laying table with air cushion Conversion trolley with lifti... more
|
|
5
Wagenfeld, Germany
6436 km
1995
good (used)
1 fibrecutter EUR 29.000,- loaded Neumag, year 1995, type NCM 600, for fibrestaple 40, 60, 80,and 120 mm, Bfgbvzzmi7 suitable also for synthetic fibretows (acrylic, polyamid, polyester, viscose) production 200 kg/h more
|
|
5
Rotthalmünster, Germany
dealership location
6938 km
good (used)
M3jb2 Barber Colmann knotting frame Model: 56 MF can be used for knotting machines: Barber Colman knotting machine MW MS 9 Total length: approx. 2.30 m Width approx. 0,60 m Height: approx. 1.15 m Frame with a lot of accessories see photos Price: 500 .-- Euro netto more
|
|
2
Rudolfstetten, Switzerland
dealership location
6668 km
1998
good (used)
1. 75kw, 230VAC, 7.5A Hmoccgb more
|
|
4
Bad Abbach, Germany
6829 km
2011
excellent (used)
Textile cutter can be used flexibly Max cutting height 3.00 cm Max cutting width 180.00 cm Infinitely adjustable vacuum Layer height max. 40 Cutting Lectra and Gerber Files Operating Hours Cutter (Complete): 12490 hours (1561 days at 8 hours/day) Engine hours (vacuum): 4830 hours (603 days at 8 hours/day) Bffdbalzgc Operating hours Head: Cannot be read, but according to experience 70-80% of the vacuum Power consumption: 26271 kW/H at 7660 hours of standby and 4830 hours of cutting P... more
|
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
