Fabric cutting machine

Lectra Vector 5000 V3

Year of construction: 2007, condition: excellent (used), Vacuum packaging machine VC999 07P, year of manufacture: 2007. Connection: 400V. Laodpfxsf Srcfo Anxjg Chamber dimensions approximately 88x50x15 cm, equipped with 2x CLFH 220 Rietschle vacuum pumps. Year of manufacture: 1998, power: 2x 5.5 kW. In very good condition, fully functional.

Year of construction: 2003, condition: good (used), functionality: fully functional, Equipment: documentation/manual, ITALMATIC Autoclave AIT ø 2600x5000 year 2003, in good condition, available now, fully functional P.S.: 13 barg Tmin/Tmax: +20 / +175 C Volume V: 33900 litres Fluid group 2: AIR Module: B+F Test Pressure TP: 20,7 barg Lsdpfoy N Ubbsx Anxeag CAT.: IV Inspection is possible by appointment.

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Laedpoyrnhxjfx Anxog Has been operating in a greeting cards factory Comes with centre line system 2 x die cut chases 1 x embossing honeycomb if required Can be demonstrated on location, London Area, UK Available immediately

Condition: like new (used), Vacuum machine Manufacturer: Supervac Lid with plexiglass window On wheels with brakes Microprocessor control with vacuum sensor Integral vacuum pump with motor protection Reliable and easy to service Easy to clean Simple to operate Chamber dimensions: 800x730x250mm Lasdexru Tgopfx Anxsg Seal lenght: 4x 660mm

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Lajdpoxmurrofx Anxsg

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. Lodpfx Aswgbw Renxjag 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: excellent (used), Year of construction: 2001, TUBULAR JUICE UHT STERILIZER MADE BY KF ENGINEERING, GERMANY CAPACITY 11 TONS PER HOUR Lodpfev Tl D Nox Anxoag FOR ALL JUICES, INCLUDING TOMATO MAX TEMP. 124 DEGR. C. PLC SIEMENS-7

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, W&H Triumph 1 Ljdpfxew Nvi So Anxoag 3 layers Photocell for preprinted reels

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. Ledpfx Anjv Sa I Tjxjag In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Lodpeu Agh Sofx Anxoag Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location