LEEC P33 Mk 11 Proportional Temperature Controller

LEEC P33 Mk 11

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: 2021 model 7350 km (will go a little) 721 Engine hours 241 Crane hours Euro 6 engine 8x2 551 HP Suspension on 1st and 2nd axle: Steel Suspension on 3rd and 4th axle: air 2 x 110 liter variable pumps 2 x manual extensions for main boom and 2 x for jib Scanreco optical remote control (Top model) Weight cell main boom Additional function for main boom and jib Auto leveling (The car puts itself in a level position ready for lifting.) Virtual space (Possibility to limit all axes with a few keystrokes, no need to open a workshop for this. Brilliant when working under high voltage etc.) SKF central lubrication ring and up to the first link Extra function all the way up the jib Single winch hook (Jib / main boom) 2 shear winch hooks (Jib / main boom) 4-point winch hook (Main boom) Hook for jib Hook for main boom (Large hook) N d lower the generator (24 volts) Cable stop sensor and sleeve 4 ton winch Diagnostic cable for online help (Remote help) Danfoss valve center 2 x 2 ton counterweight (M is only used for cranes above the cabin, otherwise the counterweights are not needed, and these can be removed as needed) Front support leg   Nedpfx Aswphixjfhjwb Structure: 4 x work lights strategically placed inside each outrigger cabinet. 50" LED bar work light at the rear of the cab Powerful LED lights in the crane. VBG mount, with air servo control unit mounted in rear cabinet left side. Roof rack 2 high beam LED bar on roof forward (daylight!!). Orange work warning LED beam on the roof. EasyUp foldable ladder with side railing. Boxes for chains, screws, etc. Mounted on the rear support legs so that they are extended together with the support legs and are also packed away while driving. Charger for control in cabin Plastic inner fenders axle 3 and 4. 3 edge pull-out cabinet between axles 3 and 4 On the left side between axles 2 and 3, a large cupboard with a 500 W fan heater is installed for hanging clothes to dry, etc. Flat / bottom rear closed with alloxed aluminum door panels that are cut to fit the car perfectly, with rounded edges for a very professional look. CNC manufactured plates up the back of the cabin. Fully painted sides, cabin and stern. Crane rest cradle for operation without jib. 5 pcs support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cribs at the back of the "plan" Right side large cabinet 1.2 x 1 meter Powerful LED reversing/rear work lights. The rear of the car was rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. Hatches strategically placed for access to relevant facilities under the building. Precisely cut out panels in side...

Condition: ready for operation (used), functionality: fully functional, power: 51 kW (69.34 HP), fuel type: diesel, empty load weight: 5,500 kg, maximum load weight: 500 kg, axle configuration: 4x4, Year of construction: 1983, operating hours: 13,859 h, Truck/Tractor Unit MB-Trac 700K with hydraulic arm, registered as a tractor unit. We would be happy to demonstrate the vehicle for you. It is in good overall condition, fully operational, and immediately available. Technical specifications: Hydraulic arm: Tirre 9001 loading crane Max. outreach: 7.4 m Max. lifting capacity at max. outreach: 1,100 kg Max. lifting capacity at min. outreach: 1,100 kg Permissible total weight: 3,500 kg Transmission: 4-speed (split range/hare/tortoise gear) Engine: MB Daimler, 51 kW Displacement: 4 l Year of manufacture: 1983 Axle configuration: 4x4 Nwodpfx Afsxvyv Ushsb Operating hours: 13,859 km Unladen weight: 5.5 t Gross weight: 6 t Gross weight with trailer: 40 t Body length x width: 104 cm x 220 cm Hydraulic connections for additional equipment at the front and rear + PTO shaft connection. The vehicle is equipped with four new tires plus a spare wheel.

Condition: used, This listing is for the LEEC C330 Classic Incubator The unit is in full working condition and is ready for immediate use Key Specifications Chamber Capacity: 330 litres External Dimensions: 1417 mm (H) × 684 mm (W) × 620 mm (D) Internal Dimensions: 1200 mm (H) × 550 mm (W) × 500 mm (D) Temperature Range: Ambient +5°C to +60°C Temperature Control Accuracy: Typically ±0.1°C at 37°C Temperature Variation: Typically better than ±0.2°C at 37°C Temperature Recovery Time: Approximately 4 minutes Power Rating: 440 watts (maximum) Weight: 107 kg Shelves Included: 6 Construction: Fully sealed chamber with polished stainless steel and rounded corners for easy cleaning Air Circulation: Fan-assisted for even temperature distribution Nwodpfoxhf Umex Afheb Safety Features: Over and under temperature alarms, independent overheat safety cut-out, and password-protected settings Controller: Digital microprocessor with Fuzzy Logic and Auto-Tune features Notable Features Energy Efficiency: Low wattage heating elements combined with high-performance thermal insulation ensure excellent temperature stability while minimizing energy consumption. User-Friendly Interface: The digital controller displays both target and actual temperatures in real-time on a two-color display, making it simple to monitor and adjust settings. Enhanced Safety: Programmable alarm thresholds and an independent safety cut-out provide added protection against over-temperature conditions. Maintenance-Friendly Design: The sealed chamber with rounded corners facilitates easy cleaning, and the rear access port allows for safe insertion of temperature monitoring probes.

Condition: used, This listing is for The LEEC P3 Precision Incubator with Damaged door The unit is in full working condition and is ready for immediate release The LEEC P3 Precision Incubator is part of the LEEC Classic Incubator Range and has been replaced by equivalent models from this range. It offers accurate and reliable temperature-controlled storage with robust construction designed for durability and performance in various laboratory or clinical environments. Key Features: Precision Temperature Control – The incubator features a digital temperature controller that ensures excellent temperature stability to within ±0.1°C, providing reliable and consistent results. Robust Construction – The fully sealed chamber is made from polished stainless steel with rounded corners, which not only ensures durability but also makes it easy to clean. The outer cabinet is constructed from stainless steel and finished with tough polyester powder coat paint, ensuring longevity and resistance to wear. Adjustable Shelving – It includes adjustable perforated stainless-steel shelves, offering flexibility for organizing samples or items within the incubator. Inner Glass Doors – The incubator is equipped with inner glass doors, allowing easy observation of contents without needing to open the chamber and disrupt the internal environment. This incubator is designed to maintain reliable temperature control and withstand the rigors of professional use, making it an ideal solution for precision storage in laboratories, medical facilities, and other scientific settings. Nwedpfsxwc Atox Afhjb