LPG Forklifts

Linde H 18 T-01 391 Triplex Zinkenverstellgerät

Condition: used, machine/vehicle number: 16469, Year of construction: 2018, operating hours: 9,368 h, load capacity: 1,800 kg, lifting height: 4,600 mm, free lift: 1,460 mm, load center: 500 mm, construction height: 2,100 mm, fork length: 1,000 mm, front tire size: 2 x 18x7-8 20 - 40%, rear tire size: 2 x 18x7-8 0 - 20%, overall weight: 3,265 kg, enginetype: LP Gas, manufacturer: Linde Fgedpfx Ajw Snwtjdcjc

Condition: used, Year of construction: 2018, fuel type: diesel, weight max. in kg 1800 kg stroke 4250 mm fork length 1200 x 120 x40 mm Fgjdot Symlepfx Adcjc free lift 150 mm construction height 2746 mm

Condition: used, LINDE Electric Forklift Type E25L-01 Serial No. H2X387D01930 Year of Manufacture 2013 Load Capacity 2500 kg Lift Height 4700 mm Fork Length 1600 mm Fork Carriage Width 1150 mm Overall Height 2200 mm Operating Voltage 80 Volts - Triplex clear-view mast with 1500 mm free lift - 2x auxiliary hydraulics on the fork carriage for attachments - HOPPECKE Type 5HPZS 575 battery pack, 80 Volt 575 AH with EUW (new battery from 2019) - INDATRON Type D automatic charger, 80 Volt / 80 Ampere with EUW - 4-wheel super-elastic, solid rubber tires, front 225/75-10, rear 200/50-10 - Driver's cabin with Heating - Hydraulic auxiliary steering - 2 LED work lights at the front - 1 LED work light at the rear Fjdpjd Rmx Nofx Adcsgc - 1 LED BlueSpott at the rear - 15,995 operating hours according to the hour meter - New TÜV and UVV inspection Length without forks: 2,500 mm Overall width: 1,150 mm Weight: approx. 4,700 kg Good condition

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Fjdpfxswp Ipxo Adcogc

Condition: used, Year of construction: 1990, saw blade diameter 350 mm dimensions of saw-blade 350 x 32 x 2,5 mm cutting diameter 115 mm capacity 90 degrees: square 95 mm capacity 90 degrees: flat 180 x 95 mm capacity 45 degrees: round rechts & links 110 mm capacity 45 degrees: square rechts & links 95 mm capacity 45 degrees: flat rechts & links 125 x 95 mm capacity 60 degrees: round 90 mm capacity 60 degrees: square 80 mm capacity 60 degrees: flat 90 x 95 mm cutting speed 15 - 90 m/min total power requirement 2,5 kW weight of the machine ca. 400 kg Fodpfx Adewvl E Recjgc dimensions of the machine ca. 1000 x 950 x 1800 mm Features: - With miter adjustment 60° left / 45° right - Machine base

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter Fgodpfx Asyv I Hwodcjc

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, saw blade diameter: 120 mm, O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: EISELE Vertical cold circular saw with mitre cut Type VMS II – 350 PV Year of manufacture 2010 _____ Max. saw blade diameter 350 mm Saw blade speeds 40 / 80 rpm Workpiece diameter 90 mm Swivel range of saw table 0 – 90 degrees Continuously adjustable pneumatic feed 0 – 10 (?) Approx. weight 350 kg Features: • Adjustable workpiece length stop, mounted on the right - Max. adjustable length: 500 mm • Pneumatic workpiece vice – clamping width 160 mm • Minimum quantity coolant system (MMKS) for saw blade • Adjustable depth stop Fgedpfjyub N Uex Adcoc

Condition: good (used), Year of construction: 1987, functionality: fully functional, saw blade diameter: 375 mm, cutting range round steel at 90°: 135 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 680 kg, Semi automatic circular saw, blade Ø 375 mm, capacity Ø ca. 135 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, hydraulic vertical clamp, 1 horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device, measuring device 2 meters; dimension 85x110x180 cm, weight ca. 680 kgs Fjdpfx Ajx Dl Dmodcjgc

Condition: new, dimensions of saw-band 2950x27x0,9 mm 2 speeds 36/72 m/min Vice opening 285 mm capacity 90 degrees: round 250 mm capacity 90 degrees: square 220 mm capacity 90 degrees: flat 280x220 mm capacity 45 degrees: round 230/200 mm capacity 45 degrees: square 200/170 mm capacity 45 degrees: flat 220x200/200x140 mm capacity 60 degrees: round 120 mm Fedpfxoyv Nptj Adcjgc capacity 60 degrees: square 80 mm capacity 60 degrees: flat 140x100 mm output 1,5 / 1,8 kW Weight 440 kg dimensions 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 2,500 kg, fork length: 1,350 mm, empty load weight: 150 kg, construction width: 1,040 mm, opening width: 1,020 mm, Fork positioner Load center of gravity: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Fjdou Ha Slspfx Adcjgc Technical condition: good Description: Feed fork tines