Condition: In good condition, checked and partially overhauled by a specialist.
The existing milling head was replaced by an overhauled universal milling head.
Differential for inclined machining
Automatic indexing device (indexable disc changeable!) For multi-wedge,
multi-thread parts, then extensive bushings, support rollers and around 70
Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and save...
gear hobbing machine / gear hobbing machine make NILES Typ RF 6 M 15
licensed building Pfauter Chemnitz, year of construction unfortunately not visible
wheel diameters to be milled for spur gears 1500 mm
gr. pitch to be milled 15 Mod.
Area of the helical wheel drm. at
10° spiral approx. 1500 mm
20° spiral approx. 1500 mm
30° spiral approx. 1350 mm
40° spiral approx. 1060 mm
45° spiral approx. 900 mm
50° spiral ca 750 mm
60° spiral approx. 450 mm
Cutter revolutions per minute 20-2...
with div change gears.
Max fräsbarer workpiece diameter. 40 mm (46 mm)
Max workpiece length 75 mm (110 mm)
Max Fräsbarer workpiece length 40 mm
Max fräsbares module 1
maximum cutter diameter. 32 mm (40 mm)
Max milling width 15 mm
Shifting 12 mm
Spindle Tiltable +-6°
Milling cutter speeds of 400-4800 RPM.
Radial & axial feed rates of 0-4 mm / sec.
Tailstock spindle stroke 30 mm (60 mm)
Tailstock moved 61 mm
Weight 800 kg
Accessories: coolant system, various recordings, feeder rail.
THREAD AND WORM MILLING MACHINE
Make : WMW WANDERER.
Model : GFL 400 x 2000.
Workpiece diameter : 400 mm.
Threading length : 2000 mm.
Spindle bore : 80 mm.
Max. module : 12.
Machine weight : 4500 Kg.
Gear hobbing machine make PFAUTER type RS 1
Machine # 3108 Year of construction 1941
largest diameter for spur and worm gears
with / without counterholder 400 / 750 mm
largest milling width for spur gears (up to 275 mm drm.
over 275 mm dia.) 295 - 315 mm
smallest number of teeth to be milled 12
largest module pitch 8
helical gear angle 10° 30° 45° 60
largest millable wheel diameters 750 / 600 / 500 / 200 mm
Millable widths for largest diameters 270 / 270 / 27...
TOS OH 6
Distance between spindle and spindle axis 200 mm
Maximum length to carve 90 mm
No. of strokes / minute of the cutter 50-315 g / min
Ø Max. to carve 500 mm
Ø max. to carve outside 500 mm
Ø max. to carve interior 450 mm
Ø Max. of the Cutter 120 mm
Ø of the hole of the table 75 mm
Ø Table 600 mm
Height 2100 mm
Width 1000 mm
Length 2100 mm
Weight 3500 kg
Main motor power 3 Kw
Total Power 4 Kw
Automatic gear hobbing machine make MORAT type B 9for milling gear wheels with straight toothing Technical data:gr. workpiece diameter magazine guide20 mm gr. workpiece diameter without magazine guide70 mm small workpiece diameter1.5 mmgr. Milling length40 mmgr. number of teeth to be milled up to 360kl. number of teeth to be milled5gr. Pitch Module 1kl Pitch Module 0,1Pliers clamping0,5 - 12 mmPower Main motor0,5 PSLpower Return motor1/6 PSLpower Magazine motor1/6 PSWeight approx.400 kgmwithcomp...
Gear and spline shafts hobber Fabr. STANKO type 5A308 P Masch. # 554
KL. / gr. Workpiece diameter 0/80 mm
Gr. Module 1.0 mm
KL. / gr. Number of teeth wheels 400 changes d.zu adjustment path of the milling slide 82 mm
Milling cutter diameter 24-30 mm
Gr. Swivel angle of the cutter spindle 3°
Workpiece spindle inner taper 1:5
maximum spindle speed 4 U/min
Number of spindle speeds 6
Range of spindle speed 202-2040 R/min
7 feeds 0.1 1.42 mm
Rapid adjustment speed 0...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH Does not assume liability for the content of linked external websites.