Centrifugal pump

Lowara NSCE50160

Condition: good (used), Item: D-1746-APV-Baker-N35-15m3 Exchanger Bdjdpfxjimmb Sj Al Ueg APV BAKER PLATE EXCHANGER Stainless Steel Exchanger Pasteur with 2 section, Capacity 2 x 15 m3, working press 6 Bar, 47,9 m2, temperature 120 C,

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Manufacturer: Busch Type: RC 0100B Ultimate pressure: approx. 20 mbar Bdodpfx Aobrantsl Uog Pumping speed: approx. 100 m³/h Condition: General overhaul If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us.

Condition: ready for operation (used), Cooler Guntner Type: S-GGN 066C/27 Cooling capacity: 40 kW at DT8 Fin spinning: 7 mm Place for electric heaters Fans: 2 x 660 mm Rpm: 870/650 Dimensions: 3050 x 700 x 1100 mm Refrigerant: Glycol Volume: 54.8 L Weight: 275 kg Bdodpfxohz T Ige Al Ujg Pieces in stock: 4 Reference number: CH259 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Year of construction: 2013, condition: excellent (used), 2x Fristam FKFS40 Lobe pump Bedpfx Aewf Nkvel Usdg 2.2 kW Small difference in the delay between the pumps Excellent condition

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Incl. special grinding shoe Bodev D H Sijpfx Al Uodg Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual Bdsdjtwb U Aspfx Al Uog belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: used, empty load weight: 5,100 kg, maximum load weight: 12,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/1998, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 1 mm, total length: 9,850 mm, total width: 2,550 mm, total height: 1,600 mm, suspension: steel, tire size: 235/75R17.5, wheelbase: 5,400 mm, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, turntable, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, container locking mechanism, U-shaped protection, pneumatically adjustable drawbar, lateral aluminum side protection, twin tires, storage compartment, removable side boards. Wheelbase: 5400 mm, Body: Trailer for roll-off containers with lengths of 6m-6.75m, SAF axle type SKRZ 11030, pneumatic hook lowering system, 2x receiving pocket for pluggable locking hooks, 4x pockets for pluggable container centering and bin stop. The trailer can also be used as a flatbed! Aluminum side boards with a height of 600 mm are included with the trailer! Bdsdpfxji Rpxwo Al Ueg Loading ramps available for an additional charge of €900.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: refurbished (used), Leybold E250 Rotary Piston Pump pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty Bsdjfq D Hnjpfx Al Usdg

Condition: new, sheet thickness: 3bending length: 1250upper roll diameter: 90sheet length: 1250 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Working Length: 1250 mm Maximum Thickness:Pre-bending: 2.5 mm Bending: 3.0 mm Yield Point: 240 N/mm² Number of Rolls: 3 Top Roll Diameter: 90 mm Minimum Bending Diameter: 130 mm Motor Power: 1.1 kW Machine Length: 1950 mm Height: 1130 mm Width: 900 mm Weight: 500 kg Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 314,-- - Hardened rolls EURO 550,-- Bedpfx Aod Ab Tzel Uedg We have many references!

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Krauss Maffei, hydraulic unit from injection molding machine 90-340 B Bjdpfxsgz Iq Us Al Usdg -Motor: Loher 15 kW 1425 rpm Type: KNGA-160LB-04D IEC160L IMB35 -Individual components: see images -Liter output: unknown -Dimensions: 900/520/H610 mm -Weight: 261 kg