Shredding plant

mütek 630 AL

Condition: as good as new (ex-display), Year of construction: 2024, Special machine for shredding plastics Basic machine from €24,990 net Well suited for shredding: - Paper, cardboard boxes, pipes, profiles, boxes, canisters, buckets, cans, sections of wooden pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - special rotor with embedded blades (reduced load capacity), - small cutting gap between blade and counter blade Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Ijlhcded H R Sxsw Njib Control: PLC Top cutting unit opening 600 x 800 mm The parts should be a maximum of approx. 500x500 mm in size *the height is less important hydraulically operated slide, sieve hole of your choice (25 - 40mm) For plastics, coarser sieves are recommended (30-40 mm) *If you want to shred more finely, a two-stage shredding process is recommended with downstream granulator type MVZ (sieves 5-15 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm Other options available for an additional charge: - Raise the shredder by approx. 25 cm (Preparation for conveyor belt removal) + €995 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,490 net - Overband magnet + €6,750 net - Control of conveyor belt and overband magnet + €2,495 net (Start and stop synchronized with the chipper) - Alternatively, manual start and stop on the conveyor belt + €497.50 net . Requirements for the raw material: - The moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. . We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos. --- *only for brittle plastics with a medium degree of hardness, *not for elastic or extremely hard and heavy plastics - this would affect the durability of the system. --- Optional would be the next larger machines Basic machine: Shredder MGZ 830 K-S - 18.5 kW Cutting unit opening at the top 800 x 1,000 mm The parts should be a maximum of approx. 720x700 mm *the height is less relevant from €39,995 net * Options depending on the effort Basic machine: Shredder MGZ 1030 K-S - 22 kW Cutting unit opening at the top 1,000 x 1,000 mm The parts should be a maximum of approx. 900x700 mm *the height is less relevant from €49,975 net * Options depending on the effort Basic machine: Shredder MGZ 1330 K-S - 37 kW Cutting unit opening at the top 1,300 x 1,200 mm The Parts should be a maximum of approx. 1,200x700 mm in size *the height is less relevant from €79,975 net * Options depending on effort

Condition: as good as new (ex-display), Year of construction: 2023, Special price for our prefeeder Another machine, available immediately (ex works Neckartailfingen) approx. 24 operating hours. Suitable for shredding all types of waste wood and pallet offcuts. The pallet should be prepared with the jigsaw or chainsaw so that it fits upright in the hopper - see picture 2. 40x20x20 cm would be ideal so that the wood can lie flat on the pusher floor. This is where the machine works most effectively. At the bottom of the shredder there is a hydraulic pusher which presses the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput of up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overbelt magnet at extra charge. + Powerful 18.5 kW motor, + concave knives, + large high-performance gearbox, Iolhcdodwktkow Noib + special, load-dependent pusher control, Product code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Knives: 15 pieces, multi-rotatable Option double row of blades + 995 € net Rotor diameter: 260 mm Control: SPS Siemens S7-1200 Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 qbm Hydraulically operated pusher Screen perforation of your choice (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm Moisture content: ᐸ 30 % Atro . Included as standard: - V-rotor for maximum throughput - Switch cabinet with Siemens PLC control - Automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idling - speed 70-90 rpm for high throughput capacity - Cycle control to avoid idling times - Performance-enhancing step control of the hydraulic slider - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE Conform. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Folding conveyor belt +8,770 € net Horizontal part: 1200 mm Rising part: 2500 mm Angle: 0-60 degrees adjustable Discharge height: approx. 2000 mm + - 100 mm - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Hopper adjustment + 940 € net - Eco rings: + € 1,980 net (recommended for more than 15 % hardwood) - Special scraper + 990 € net (recommended for veneer or paper) - Double row of knives + 995 € net . Requirements for the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones etc. lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2023, Demonstration machine with approximately 10 operating hours Another machine available immediately (ex works in Neckartailfingen) *Options available for an additional charge - see below Included: + Profile rotor for higher throughput We would be happy to conduct a free test with your material. I invite you to visit us in Neckartailfingen. You can also send us your material via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15, multi-rotatable, Double row of blades available for an additional €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Funnel volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 40 mm) Ijlob Ny Eyshcdw Njib Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg Dimensions (l x w x h): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% dry matter . Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start-up - Fast hydraulics - Automatic OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . Shredder options available for an additional charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,080 net - Eco-Rings: + €1,980 net (recommended for more than 20% hardwood) - Double row of blades + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or items with a material thickness of less than 3 mm) - Bent conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overhead magnet + €5,980 net Alternatively, a fixed magnetic block above the conveyor belt for regular manual scraping + €990 net (for low-volume shredding) Metal parts) - Conveyor belt and overhead magnet control + €2,750 net (Start and stop synchronized with the chipper) or manual start and stop of the belts + €595 net . Raw material requirements: - Moisture content (absolute dry matter) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Ijlhcded E R D Ssw Njib Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: excellent (used), Year of construction: 2013, operating hours: 800 h, Functionality: fully functional, machine/vehicle number: 630_00105, total height: 1,737 mm, total width: 1,167 mm, total length: 1,650 mm, overall weight: 1,300 kg, rotor diameter: 260 mm, rotor width: 264 mm, type of input current: three-phase, opening width: 630 mm, rotor length: 630 mm, sieve perforation: 10 mm, input voltage: 400 V, type of motor: three-phase motor, power: 18.5 kW (25.15 HP), hopper volume: 650 l, MRZ 630/18 Shredder Motor: 18.5 kW, 400V-50Hz-3ph Blades: 30, multi-rotatable Special rotor for maximum throughput Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Hopper volume: approx. 1.2 cbm (upgraded) Throughput: Ijlhcowc Sw Tedw Nsib 1-2 fillings/hour Hydraulically operated slide gate Screen hole for briquetting Suction nozzle 160 mm Dimensions: (LWH): 1737 x 1167 x 2260 mm (including enlarged attachment) V-rotor for maximum throughput Second row of blades for improved throughput Speed: 70-90 rpm Cycle control to avoid idle times Performance-enhancing step control of the hydraulic slide gate Pertinax guides for hydraulic slide gate (low-wear) Vibration-damped CE-compliant

Condition: new, Year of construction: 2024, Vanhold 630 - spiral planing shaft, 5 rows of knives, diameter 125 mm, - knife dimensions 15x15x2.5mm -two pulling rollers in the table - divided insertion roller, divided wedge -table length 120cm -table lifted on 4 screws -table surface hardened -electric lifting of the table and electronic positioning of the table to the set height -electronic display of the height of the processed material -max. planing height 30cm - minimum material length 30cm - main engine 7.5 kW - feed motor power 1.5kW - diameter of exhaust connections 150mm x 2 - external dimensions width 1150mm x length 1300mm height 1520mm Iolhcdwst E R H No Nsib - spindle speed 5000 rpm -feed speed from 6 to 18m/min, inverter Machine weight 1250kg New machine, spiral shaft, 2 pulling rollers in the table. Documentation, CE. Available immediately, in stock.

Year of construction: 2010, Condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Ijlhcdwegulp Ds Noib Possibility to provide all additionally required peripherals or adapt to existing production plant Classifier jet mill Hosokawa Alpine 630 TFG specifically designed for toner grinding, can be used together with the Alpine 250 TTSP air classifier to produce the perfect product. Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 630 TFG with 18,5kW motor, process gas distributor, rotary valve, filter, rotary valve, blower, control cabinet

Condition: new, Dough laminator Dimensions: 3480x1110x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 610x2800mm Iislhcdjuugraow Nsb Distance with adjustable roller: 1-40 mm Weight: 260kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x1100x1160 mm Weight 950 kg Ielhov A E Igocdw Nsib Total power requirement 8 kw

Condition: used, Year of construction: 1996, Kaeser noise protection hood built in 1996 for an EPC 630-150 Iielhcdjvkf Dksw Njb From stock sale We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: excellent (used), Year of construction: 2012, operating hours: 38,000 h, Functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 392 cm³, injection pressure: 2 bar, ejector force: 225 N, ejector stroke: 90 mm, plate length: 900 mm, plate width: 900 mm, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 900 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 630 S 2500-800 technical data clamping unit clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm Iiolhcdeu Edwpew Njb max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 90 mm ejector force: 225 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar screw length: 20 l/d screw stroke: 200 mm screw speed: 60 min screw torque: 1000 N injection rate into the open: 300 g/s PS number of heating zones: 8 nozzle stroke: 400 mm measures & weight measures of machine l x w x h: 6.4m x 1.95m x 2.21m total weight: 12140KG equipment included screen text german CEE-socket 16A CompactFlash interface for data storage core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 interface OPC Schuko-socket 10A selection unit

Condition: new, Year of construction: 2023, Sell ​​an alligator shears, metal shears for cables, pipes, profiles Max. cutting force 630 kN Cutting length 600 mm Iislhslhrb Hjcdw Nob Max opening 280mm hydraulic Pressure 25Mpa full cycles p. minute 7-8×/min. Power consumption 7.5 kW Weight approx. 1,400 kg Size (L×W×H) 1600×700×1300

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x1100x1160 mm Weight 950 kg Iijlhsv A E H Njcdw Neb Total power requirement 8 kw

Condition: excellent (used), Year of construction: 2006, operating hours: 77,123 h, Functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, clearance between the columns: 630 mm, displacement volume: 664 cm³, injection pressure: 2,000 bar, ejector force: 86,000 N, ejector stroke: 225 mm, plate length: 900 mm, plate width: 900 mm, installation height: 2,200 mm, total length: 6,400 mm, total width: 2,100 mm, total height: 2,200 mm, overall weight: 13,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 1,000 mm, Equipment: documentation/manual, injection moulding machine ARBURG Allrounder 630 S 2500-1300 warehouse no.: 503418 manufacturer: ARBURG type: Allr. 630 S 2500-1300 ECO controller: Selogica year of construction: 2006 technical data clamping unit clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 400 mm max. mould height: 700 mm max. open daylight: 1000 mm opening stroke: 600 mm ejector stroke: 225 mm ejector force: 86 kN centering diameter of moving platen: 160 mm centering diameter of fixed platen: 160 mm technical data injection unit screw diameter: 60 mm swept volume: 664 ccm injection pressure: 2000 bar screw length: 20 l/d screw stroke: 235 mm screw speed: 43 min screw torque: 1900 N injection rate into the open: 202 g/s PS number of heating zones: 5 nozzle stroke: 550 mm measures & weight measures of machine l x w x h: 6.4m x 2.1m x 2.2m total weight: 13500KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. water flow regulator machine without belt conveyor machine without material hopper Iijlhcdeuhw Evjw Nsb Anti vibration mounts interface EUROMAP 67 interface for handling Schuko-socket 10A

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x1200x1400 mm Weight 1100 kg Iijlhcjvz Ekfodw Neb Total power requirement 7,5 kw

Condition: new, Year of construction: 2025, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: Islhcdechqxxow Nsib - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: reconditioned (used), Year of construction: 2024, Delivery time approx. 3 months Ijlhed N Dnhocdw Neib . The hydraulic briquetting presses of the MPP NEM series press materials such as aluminum, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality in continuous operation. The pressing process takes place without the addition of binding agents, solely through the hydraulic pressing pressure. The volume of the starting material can be reduced by up to 90% depending on the material. Throughput: up to a maximum of 70 kg/h (depending on the material), Briquette diameter: Ø 50 mm, Motor: 5.5 KW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank 110 liters . Dimensions: 1750x1130x1100 mm lxwxh Weight: 780 kg. . Hydraulic pre-compression via slide valve Main press cylinder Vertical cylinder . Fill level indicator: yes . Requirements for the starting material - Max. chip length: 15 mm - Installation temperature: temperate room at least +5°C - Max. weight on agitator: 200 kg. - The feed must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and / or increased wear can result

Condition: good (used), Used machine, good condition. Delivery time appr. 19 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Ielhcsfmqq Eodw Noib Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: new, Year of construction: 2024, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € Iislhcdwjchuvrs Nsb - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Year of construction: 2023, Condition: new, Machine in preproduction machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control Ijledv Eu Hjhcdw Njib - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: good (used), Year of construction: 1994, number of straightening rollers: 23, roller diameter: 30 mm, overall weight: 43,000 kg, material width: 630 mm, max. sheet width: 630 mm max. sheet thickness: 6 mm Islowh I Ixshcdw Njib min. sheet thickness Blechdicke / min. sheet thickness: 0.3 mm Anzahl der Richtwalzen /number of straightening rollers: 23 Walzen / rollers Richtwalzendurchmesser/diameter ofstraightening rollers: 30 mm Richtgeschwindigkeit / speed of straightening: 10 m / min Min. workpiece length / Min. workpiece length: 50 mm Max Walzenabstand vertikal / Max. vertical roller distance: 20 mm Ablesung der Maschineneinstellung / Reading the machine settings: 0,01 mm Hauptantriebsmotor / power of main motor: 6 kW Gewicht der Maschine / weight of the machine: 4,3 t

Year of construction: 1980, Condition: good (used), Info: Machine was embedded in a pit! Iislhcdwov Dvngj Nsb - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW - Machine weight: 5,500 kg

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, clamping force: 2,500 kN, screw diameter: 40 mm, clearance between the columns: 630 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, total length: 7,050 mm, total width: 2,050 mm, total height: 2,350 mm, overall weight: 13,050 kg, Equipment: documentation/manual, warehouse no.: 503584 manufacturer: ARBURG type: Allrounder 630 H 2500-400 controller: Selogica year of construction: 2019 Iijlhswktupjcdw Nsb clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 750 mm max. open daylight: 1300 mm opening stroke: 550 mm screw diameter: 40 mm swept volume: 201 ccm injection pressure: 2000 bar equipment included screen text german CEE-socket 16A machine incl. Handling machine incl. water flow regulator machine without material hopper machine without safety fencing Anti vibration mounts interface for handling interface OPC Schuko-socket 10A measures of machine (without robot) l x w x h: 7.05m x 2.05m x 2.35m total weight: 13050KG technical data robot-system handling type: Linear manufacture: ARBURG controller: Multilift V 15 year of construction: 2019 handling weight: 15 kg total weight: 500 kg

Condition: good (used), Year of construction: 2007, Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Type: HEC 630 Athletic Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Islhcdwjwiwaas Neib Storage location: Halberstadt Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t

Condition: ready for operation (used), Year of construction: 2009, Travels X-650mm, Y-765mm, Z-520mm, CNC control Fanuc 31i, spindle speed 12,000rpm, tool magazine 40 places Iiolhowkurcscdw Nob