Mulcher

Müthing Mulchgerät MU-M 280

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) Fsdporgzv Nefx Aayepl * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, Year of construction: 1978, operating hours: 9,125 h, 1978 | Hanomag MF 33C Massey Ferguson / for parts only | Used Wheel Loader | 9125 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 5 inspection points 5 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Only for parts recovery, not complete. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40580 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Fpodpey Iy N Uefx Aayel We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2024, PTO shaft Walterscheid W2480- / Fpodpfxeud H Hho Aaysl

Condition: used, Year of construction: 2024, PTO Walterscheid side mulcher MB 220R PROFI LW / Fodpfx Aaetqug Tjyspl

Condition: new, Year of construction: 2024, SCHORR ride-on sweeper Electric sweeper Street sweeper Floor sweeper Powerful and smooth-running sweeper for indoor and outdoor use. With switchable spray nozzle. The ride-on sweeper offers a convenient and efficient solution for floor cleaning. The ergonomic seat and intuitive controls enable effortless operation, even over long periods of time. The powerful motor ensures thorough cleaning even in demanding conditions. With a generous 80-liter collection container, large areas can be cleaned without frequent interruptions. This combination of convenience and efficiency makes floor cleaning a stress-free and enjoyable task. The LED work lights fitted as standard make it easier to work in darker areas. With an output of 1920 watts from 48V, the sweeper is equipped with enough power to get you comfortably to over 4 hours of continuous use. SCHORR RR80KM ride-on sweeper - Discover the advantages: -- Fully electric ride-on sweeper with 1250mm working width - ideal for large indoor and outdoor areas -- 48V/1920W power -- 80 liter bagless rear collection container, easy to extend and empty -- Powerful system with 48V and 58Ah -- With switchable spray nozzle for less dust turbulence -- Extremely easy to operate -- Outstanding maneuverability Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR80KM Drive: Seat Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tires: PU (non-slip) Fodpouac D Ujfx Aayepl Own weight: 400kg Basic dimensions Collecting tank volume: 80l Fresh water tank volume: 10l Main brush diameter: 500mm Total length: 1600mm Total height: 1300mm Total width: 1250mm Sweeper width (without brush): approx. 80cm *Further technical data available on request. The chassis is made of flexible and robust plastic all round, which reduces potential damage to walls, for example. Apart from the side bristles, nothing protrudes beyond the cladding so that work can be carried out as closely as possible to objects. The collection container is made of sturdy steel and can be easily removed from the rear of the machine. Sensitive components such as the headlights are protected by a metal bumper. Overall, the machine is perfectly equipped for most applications. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on sweeper. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, Year of construction: 2022, Hydraulic side shift 58cm ZW Walterscheid W2500-860mm / Fjdpfxjtpnnvo Aayepl

Condition: excellent (used), I will sell a DDR motor pump. - 800l/min - 28PS. - Very good condition. Fpodpsv Nrf Ejfx Aayol

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades Fpodoqpdi Ujpfx Aayol with templates with fence immediately available Location: Austria, near Klagenfurt

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC Fodpsu Idfrsfx Aayjpl tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 2023, ZW Walterscheid W2480-SD25.196 / Fsdpfx Aot R R Tmeayspl