Vibrating sieve 1200mm

1200

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Fpjdj E Dquspfx Aayol Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Year of construction: 1993, condition: new, functionality: fully functional, Allgaier TSM1600-2 Screening Machine / Trommel Screen Year of manufacture: 1993 Motor: 2.2 kW Fpsdpfx Aaexu Ifuoysl Including screen decks of 4.00 mm and 1.00 mm

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 13,300 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,185 mm, power: 157 kW (213.46 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,500 kg, total length: 5,470 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift - diesel Load center: 1200 ISO class: Terminal West Mast type: Duplex Transmission: Clark 13.7HR28316 Condition: Operational and fully functional Technical condition: good Front tire size: 12.00-20 Rear tire size: 12.00-20 Fjdpfezz Dmbex Aayspl Sideshift, fork positioner,

Condition: used, Year of construction: 2001, machine/vehicle number: M346, Used MBF Synchrofil LV filling monoblock 7000 BPHTechnical Specifications & Performance DataThis MBF filling monoblock delivers reliable performance for beverage production within a used bottling line or as a standalone station in industrial packaging environments. Built for hot and cold filling processes, it provides steady output and quality control for second hand bottling operations seeking dependable equipment.Manufacturer: MBFModel code: LV 1200-35 / 240-4VYear of manufacture: 2001Production speed: 7000 bphFiller configuration: 35 valvesFilling technology: Gravity with light vacuum (low vacuum)Capping: alluminio MCA 28x15 mmRotation direction: ClockwiseWorked formats: Compatible with 0.5L and 1.0L bottle formatsDesigned for bottle handling: Cylindrical containersElectrical supply: 380 V, 50 HzCompressed air consumption: 200 Nl/min at 0.6 MPaMachine weight: 4000 kgSafety features: Integrated protections and guardsDocumentation: Manuals and maintenance documentation availableDimension: Width x Height x Depth: 3.40 m x 2.60 m x 2.30 mAdvanced Automation & Control SystemsThe monoblock is engineered for consistent operation and straightforward control within beverage production. Safety circuits, interlocked guards, and emergency stops support safe operation. Format changeovers between 0.5L and 1.0L are supported with dedicated change parts and adjustments suited to gravity/light vacuum filling. The electrical configuration at 380 V and 50 Hz aligns with common industrial standards for packaging machinery, facilitating integration into existing control architectures and line PLC/HMI systems.Production Line Integration CapabilitiesThis filling monoblock integrates seamlessly into a complete used bottling line, upstream of capping and downstream of rinsing or bottle preparation equipment. It can operate as part of a larger bottling equipment layout with conveyors, labelers, and secondary packaging machines, supporting industrial packaging requirements for a wide range of beverage production scenarios.Inline or standalone operationCompatible with standard conveyor systemsFormat flexibility for 0.5L and 1.0L bottlesSuitable for hot and cold filling applicationsMachine Condition & Maintenance HistoryThe machine is currently in production, indicating proven operational status. Manuals and maintenance documentation are available to support installation, operation, and service. Spare parts availability is confirmed, supporting uptime and long-term reliability in second hand bottling operations.Operational Performance & VersatilityThe gravity with light vacuum system provides gentle product handling and stable fill levels, ideal for still beverages and applications benefiting from low vacuum as... Fpodpfjzrgq Dex Aayol

Year of construction: 2023, condition: ready for operation (used), A new belt roasting machine for nuts in the food industry is available. Fuel: diesel/electricity/gas/LPG, output: 2kW, machine dimensions X/Y/Z: approx. 3600mm/1900mm/1950mm, operating hours: 31h. Roasting capacity per hour: hazelnut kernels: 160kg, shelled peanuts: 150kg, shelled peanuts: 35kg, shelled pistachios: 90kg, sunflower seeds: 70kg, pumpkin seeds: 70kg, almonds: 120kg, cashew nuts: 150kg, chickpeas: 120kg. Including salt kettle with a capacity of 35kg and fully automatic high-pressure belt washer. Documentation available. On-site inspection is possible. Fpjdou Ei Utopfx Aayol

Condition: used, Year of construction: 1994, Used Case Erector Ape 1994 Fsdpfx Asvgupueayspl The Used Case Erector Ape 1994 is a machine manufactured by APE Impianti. Its model number is Form 1200 HM and it was made in 1994. Currently, it is in storage. The machine has safety features and comes with manuals.

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Fpodpeytb Eyjfx Aaysl Model: GR 50 1200 Arm length: 1200 mm Drilling capacity up to: 50 mm Year of manufacture: 1995

Condition: good (used), functionality: fully functional, Diameter range: 99 mm - 180 mm Height range: 90 mm - 250 mm Heads: 3 Production capacity: up to 90 cans per minute Fedet Dhv Sepfx Aayjpl Tooling for approx.: 153 mm

Condition: ready for operation (used), Siemens C98043-A1200-L 107 control card SN:Q69004, used, in good preserved condition, 100% functional, scope of delivery as per photos. Fsdpozzhrbofx Aayepl

Condition: used, machine/vehicle number: 008441, Max. panel width: 1100 mm Max. panel length: 5700 mm Max forward speed: 30 mt/min Fodsyz Slbspfx Aayepl Number of shafts: 1 Motor Power: 90 KW

Year of construction: 2011, condition: like new (used), functionality: fully functional, X-ray sorting machine. Manufacturer: TITECH TOMRA Type: X-TRACT 1200 Machine in PERFECT working condition. Fedpfx Aajyy A Uwsyepl Complete machine overhaul performed. Source replaced: €35,000 All sensors replaced: €29,000 Belt replaced: €10,000 Application: Sorting of brominated plastics in D3E streams Sorting of metals Sorting of wood, glass, and PVC for the production of RDF (Refuse-Derived Fuel) Sorting of organic waste

Condition: used, Year of construction: 1996, Second-hand machine Year of manufacture: 1996 Features and technical specifications: - The basic principle of Hofmann machines is their tried-and-tested cast iron construction - Grey cast iron is by far the leader in vibration damping, compressive strength and load-bearing capacity - Milling spindle 30 mm with clockwise and anti-clockwise rotation - Milling stop with stop jaws, central adjustment and single-sided fine adjustment of the jaws - Manual height adjustment with digital display and zero-reset button - Table dimensions: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0/6.2 kW - Spindle speeds: 3,000/4,000/5,000/6,000/8,000/10,000 rpm - Height adjustment: 125 mm - Chip extraction connection: 110/120 mm - with Holz Her 2-roller feed mechanism Weight: 850 kg Availability: by arrangement Storage location: 63934 Röllbach Fodpfx Aaszk Nnpoyopl

Condition: used, Year of construction: 1992, Second-hand machine Year of manufacture: 1992 Features and technical specifications: Electrically and oil-hydraulically controlled frame press Pressure up to 1,200 kg Two movable longitudinal pressure beams are mounted on double ball bearings and guide rails These rails allow for continuous height adjustment of the cylinders The press cylinders are adjusted using a quick-adjustment pressure lever with self-locking mechanism Two electric-hydraulic control valves (with 3 operating stages) are operated by hand levers This allows you to press with precision and assemble even the most complex frame constructions Working height x working length: 2000 x 3000 mm with 3 vertical pressure cylinders with 2 horizontal pressure cylinders Pressure cylinder stroke 120 mm Three-phase motor 1.3 kW Pressure control unit/press pressure adjustable 0–60 atü Dimensions: 3950 x 900 x 2550 mm Weight approx. 620 kg Availability: at short notice Storage location: Flörsheim Fpodpfx Aszk Nl Ueaysl

Condition: used, functionality: fully functional, Forklift Kalmar LMV 9-600 Load capacity 9 T Diesel Fsdpfx Aaevq Im Ujyepl

Condition: new, Year of construction: 2026, faceplate diameter 1250 mm swing diameter 1600 mm turning height 1250 mm control Fanuc 0i-D stroke of vertical slide 900 mm tool holder 1 distance face plate/tool carrier 700- 1500 mm vertical adjustment of the crossrail 800 mm workpiece weight 6 t faceplate turning speed range -stepless- 1 - 300 U/min feeds mm/min rapid traverse 10/12 m/min horizontal adjustment of slide -200 - +950 mm weight of the machine ca. 20,7 t Fedpfx Aajzzd R Heyopl This machine is a new machine with (C) or without milling spindle. It will be sold with full service and warranty by Wirths GmbH (Price is without live tooling). Control: Fanuc 0i-D. Machine has safety guard and 12/18 (C) position ATC.