Tractors (haulers)

F50CHn

Condition: good (used), Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres Lhedsib H Ddepfx Afwjk - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Condition: used, Year of construction: 2019, operating hours: 333 h, Equipment: all wheel drive, Well-maintained excavator from private ownership. Low operating hours: 333 h. Not a rental machine. Comes with many accessories: * Deep dig bucket 40 cm Ljdpfozn Dq Tex Afwshk * Trenching bucket * Hydraulically operated trenching bucket * Sifting bucket 100 cm * Deep ripper 100 cm * Root rake * Roll-over protection structure (ROPS) with roof Adjustable undercarriage Mechanical quick coupler !Private sale, VAT not shown!

Condition: used, Year of construction: 2007, operating hours: 8,570 h, Equipment: all wheel drive, Liebherr Wheel Loader L 538 2 plus 1 VIN: VATZ0433 HZB019019 - No particulate filter - no exhaust gas treatment - no Adblue, etc. Year of manufacture: 2007 Operating hours: approx. 8350 Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and intercooling, 142 hp Hydrostatic drive with 3 driving ranges: Speed range 1: 0-6.0 km/h, Speed range A1-2: 0-16.0 km/h, Speed range A1-3: 0-34.0 (40) km/h Machine width: 2500 mm, Height: 3.28 meters, Length: approx. 7000 mm * 3rd hydraulic control circuit (for silage block cutter, high-dump bucket, etc.) * Air conditioning * Fuel pre-filter * Driver's seat with pneumatic suspension * Ride dampener * Radio (function not tested) * Adjustable steering column * 2 work lights on the rear roof of the cab, LED * 4 work lights on the front roof of the cab Road approval - 40 km/h - possible "Load-Sensing" axial piston variable displacement pump Permissible total weight: 16000 kg Brakes: Self-locking of the hydrostatic drive, acting on all 4 wheels, and additionally a hydraulic pump accumulator brake system with wet disc brakes located in the differential housing (two separate brake circuits) Machine width: 2500 mm Tires: 20.5 x 25 VA L3 - 50% Tires: 20.5 x 25 HA L3 - 50% Available at extra cost: * Quick coupler system Liebherr with hydraulic preparation: EUR 3,550.00 * 4-in-1 bucket (grapple-planer bucket) 2 cubic meters: EUR 3,950.00 * Volume bucket 3.5 cubic meters: EUR 3,990.00 * Bucket with retaining arm from 2.0 cubic meters to 3.5 cubic meters: EUR 3,660.00 * High-dump bucket from 2.5 to 5.0 cubic meters: from EUR 5,990.00 * Pallet fork 5 tons: from EUR 1,850.00 Also available with a used scale! Lhjdozmpryopfx Afwok Pfreundt WK 50 at a price of EUR 3,900.00 * All prices are net plus VAT or for export Sales only to commercial businesses or for export. Sale in "as is" condition. No guarantee or warranty. The stated mileage or operating hours are taken from the odometer or hour meter; we do not guarantee the accuracy of these figures. Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a warranty in the legal sense. The information does not claim to be complete. The information/descriptions and images are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately. We will also accept your vehicle in part exchange. We are available to answer any further questions you may have. For our customers from abroad, we will prepare all customs and export documents for a smooth transfer abroad.

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire Lodpfjng H T Usx Afwohk See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 18,490 kg, lifting height: 10,000 mm, mast type: telescopic, Year of construction: 2016, operating hours: 4,614 h, total length: 6,140 mm, free lift: 1,100 mm, construction height: 2,990 mm, fork length: 2,400 mm, fork carriage width: 2,480 mm, drive type: Diesel, load capacity: 13,000 kg, construction width: 2,510 mm, Rigid telescopic forklift Ledpfx Aet Dd Haefwjhk Load center of gravity: 600 Fork width: 200 mm Fork thickness: 70 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Transmission: Hydrostat Condition: Ready for use and fully functional Technical condition: good Front tires Type: Pneumatic Front tires Size: 17.5 R25 Front tires Condition: 60 - 80% Rear tires Type: Air Rear tires Size: 17.5 R25 Rear tires Condition: 60 - 80% Description: Full cab with heating and air conditioning, lighting similar to STVO, 3rd + 4th valve to fork carriage, joystick sideshift, fork positioner, Hydraulic sideshift Hydraulic fork tine adjustment (opening dimension inner edge - inner edge = 610 mm - 1,950 mm) 3rd valve, 4th valve, rear working lights, heating, soot filter, full cab, air conditioning, interior mirror, exterior mirror, joystick, windshield wiper, seat,

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Lhjdpohy Tzyjfx Afwek Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, maximum load weight: 3,500 kg, loading space length: 3,530 mm, loading space width: 1,650 mm, tire size: 13 Zoll, Year of construction: 2025, Permissible total weight: 3500 kg Payload: 2775 kg, Usable area: 3.53m x 1.65m, External dimensions: 5.53m x 2.29m, 13 inch tires, braked, double axle, Drop sides: approx. 20 cm, automatic support wheel, shock absorber, weight: 725 kg, Lhjdpfx Ajttv D Uofwjk 100 km/h with sep. bucket support Optional accessories: Rear board at a price of € 160.00 / net plus 19% VAT

Condition: used, Year of construction: 2023, operating hours: 197 h, maximum speed: 34 km/h, Operating hours: 197, first registration: 10/28/2025. Basic equipment / technical data: Engine: Diesel, 3-cylinder turbo engine, 1,825 ccm - 35 hp (ISO). Exhaust: front, left. Emission standard: Stage 5. Dry air filter. Air intake system under the hood. Fuel tank capacity: 36 liters. Transmission / PTO: Hydrostatic transmission, electronically controlled. 3 groups. Electro-hydraulic PTO clutch. Rear PTO: 540 / 540Eco rpm. Central PTO. Rear axle / brakes: Oil-cooled disc brakes in the rear axle. Parking brake. Mechanical differential lock in the rear. Lifting device / hydraulics: Three-point hydraulics with mechanical position control. 1,200 daN lifting force. Hydraulic pumps with 55.1 l/min, max. pressure 160 bar. Working circuit: 41.5 l/min. 2 control valves - single/double-acting. Joystick control for 2 additional central valves. Cat. 1 lower links with hitch and upper link with ball joints. Front axle: All-wheel drive - portal front axle. Mechanical engagement of the all-wheel drive. Hydrostatic steering (separate pump). Front weight carrier with towing hitch. Tires: Without tires, without front fender. Driver's cab: De-Luxe cab factory-mounted, fixed windshield. Heater and air conditioning. 2 work lights at the front on the cab roof. 2 doors. Analog-digital instrument panel. Tilting steering column. Seat with mechanical suspension. Special equipment: - air-suspended driver's seat - hydraulic couplings - tires 24x8.5-12 / 315x80D16 Golf - front fender - front hydraulics with lower link and 1 single-acting valve - rotating beacon. Price: 33,000.00 Euro net, storage location: 54595 Prüm. Lhodpjyt Aaxjfx Afwjk

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Preheating boiler (oil) Aura AKL 2504 G ▪ Power: max. 2500 kW ▪ Flow rate: max. 99 m3/h ▪ Pressure: max. 10 PS ▪ Temperature: -10 / 315 °C ▪ Volume: 1873 L Burner Weishaupt WM-G30/1-A ▪ Power: max. 3500 kW ▪ Gas type: Natural ▪ Pressure: max. 1 bar Lhedpfx Afsxfa Tlewek

Condition: used, Year of construction: 1991, operating hours: 648 h, power: 14 kW (19.03 HP), Equipment: ABS, all wheel drive, cabin, front linkage, John Deere 670 Farm Tractor * Continuously variable rear PTO * Front lift * Front hydraulics * Rear lift * Switchable all-wheel drive Lhodpfx Aoy Skl Uofwek * Pivoting snowplow Technical data: * Engine: Yanmar 3-cylinder diesel * Power: 14.4 kW * Displacement: 0.9 l * Weight: approx. 843 kg * Maximum speed: approx. 16.7 km/h * Front tires: 6-12 * Rear tires: 9.5-16 * Dimensions (length): approx. 2.76 m Special features: * Compact design * Fuel-efficient and durable Yanmar engine * Versatile (farmyard, stable, green areas) ----Vehicle number: 12033----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transport * Vehicle registration * Recovery and vehicle transport YOUR VTS TEAM