Shredder Shafts

Hammel 750- Arjes Lindner Olnova

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Godshh A Iyspfx Aadein Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems

Condition: used, Year of construction: 2012, power: 264 kW (358.94 HP), Stationary shredder M&J 4000S. Electric drive: 2x 132 kW Gedpfx Aasu Dkf Dsdjin 400 V AC, 50 Hz Inkl. substructure, hydraulic unit, control cabinet.

Condition: new, Year of construction: 2024, ♻ The MONSTER is a hybrid machine with two shaft PRE- SHREDDER P150 TWIN (with two reduction gearboxes) combined Gsdpfjhwwplex Aadsin with one shaft SHREDDER SD90XL for efficient shredding of various types of pallets, styroform, plastic, waste, scrap and electrical devices. ✔ Power: 30 kW + 1x 5,5 kW-9,2 kW (shredder + pre-shredder) ✔ Shaft length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Shaft diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Shaft RPM: 80-120 + 5,3-10,3 rpm (shredder + pre-shredder) ✔ Number of cutting knives: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/h* ✔ Material: Pallets, styrofoam, electronic waste, plastics, wood,... ✔ Filling opening: 2072 x 1070 mm ✔ Dimensions L/W/H: 3,73/1,78/2,67 m ✔ Weight: 4200 kg 2 years warranty or 2000 working hours

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Gjdpfxjv Dwirs Aadoin

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Gisdpfxexr Tp Hj Aaden

Condition: used, power: 294 kW (399.73 HP), overall weight: 78,000 kg, Year of construction: 1997, operating hours: 11,280 h, machine/vehicle number: 72653, Backhoe excavator with digging bucket, extensive documentation available Giedpfxet S H A Hj Aadon

Condition: used, mileage: 226,206 km, power: 235 kW (319.51 HP), first registration: 10/1981, fuel type: diesel, number of seats: 27, gearing type: automatic, color: white, brakes: retarder, Equipment: air conditioning, bathroom, onboard kitchen, parking heater, This SG 221 HDS was originally intended for shuttle service to Southern Europe, but remained a one-off; nevertheless, it served as the foundation for two further high-deckers of a special kind: the S 215 HDS and S 216 HDS, which would soon bring Kässbohrer many new customers. Additionally, this coach introduced the 'S' designation: it stands for Super, because these new high-deckers truly lived up to their name. With a height of 3.63 meters, the elevated passenger compartment created even more space, accommodating not only more luggage (16 cubic meters) but also additional service facilities. Extra fuel tanks could also be installed without issue. Regardless of which of the two Super-Setras the bus operator chose, the engineering marvel of these two new Ulm models was that, except for the front section, they were 100% modular components from the Series 200 and shared identical bolted assemblies with other Setra touring coaches. The 216 HDS offered space for up to 16 rows of seats. In comparison, the underfloor cockpit variant provided more interior space. With the Setra SG 221 HDS, Kässbohrer had a vision, but due to the ban on running articulated touring coaches through France, they shifted focus in favor of solo vehicles. The SG 221 HDS was subsequently used as a demonstration and information bus at trade fairs and conferences; with its generously equipped kitchen on board, it became a central meeting point for representatives and customers. +++ Unique Vehicle +++ +++ATTENTION!!!!!+++ +++pure restoration project+++ +++not roadworthy / only the engine runs+++ Engine: Mercedes-Benz Mileage according to odometer Transmission: 5-speed automatic Seating: 24+2+1 sleeping seats ---- Safety Retarder * Fog lights Passenger compartment Stand heating * Air conditioning * Tables * Curtains * Jet ventilation * Reading lamps * Double glazing * Footrests * Tap system with bar and large kitchen in rear area * Separate bar area in the center * Lounge area at the front convertible to sleeping area * Refrigerator + additional * Microwave Gjdpformlp Esx Aadjin * Rear WC * Driver microphone Exterior Power steering * Tachograph with disc * Sleeping cabin * Driver door * Roof hatches/fans/roof ventilator Other German vehicle documents * Vehicle dimensions: length 18.00m, width 2.50m, height 3.95m * Twin tires * Tires: Front axle approx. 40% Our internal vehicle number: 7271 Subject to errors. Pictures and text may differ from the actual vehicle. Over 180 vehicles always in stock.

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW Gsdpfx Aasq Iivaedsin - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Gisdjlhqd Repfx Aadjn Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Machine weight 16 to Place: Austria Aviable: 30.01.2025

Condition: used, functionality: fully functional, 2-shaft compulsory mixer Working dimensions approx. 900 x 3,500 mm Electric drive with 132 kW motor and gearbox on a semi-mobile steel structure with new control panel Godpfstrmvfex Aadsin