Screening machine Nordberg-Dragon 25/60-3.5

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour Iedpfx Aou Thcveh Uetr bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2014, IFE eddy current separators are used for separating non-ferrous metals (aluminium, copper, brass, etc.) from all types of bulk material. IFE eddy current separator, central system INP including discharge hood, feeder tray, support frame, and control unit. Working width: 2000 mm Rotational speed: 2500 rpm Main drive: 11 kW Iedpfxowxfqrs Ah Uetr Conveyor drive: 2.2 kW Weight approx. 3200 kg Dimensions incl. discharge hood: L = 4300 mm W = 2900 mm incl. main drive H = 1250 mm incl. discharge hood IFE feeder tray, type: UE-1900x2000 F-2LM865T Working length = 2000 mm Working width = 1900 mm 2x vibration motors Dimensions LxWxH 2230 x 2200 x 1900 mm Weight approx. 1300 kg Support frame made of steel girders, platforms, stairs, discharge plate. Very well-maintained control cabinet with control system available. Machine available immediately.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste Itedpfx Aou Dg Uhoh Usr non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2641, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2641. Year of contruction 1985 Itodpfxsf E Ilzo Ah Uer Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Year of construction: 2025, operating hours: 1 h, condition: new, - Single-deck screen box (1m x 2.2m) - Fines discharge conveyor - Oversize discharge conveyor - Efficient, diesel-powered hydraulic system - Foldable conveyors for transport - Dual-axle trailer brake - LED street lighting - For loading by excavator/wheel loader or directly from a crusher - Compact design / Easy to transport / Simple setup / Versatile Transport LxWxH (mm): 5500/2191/2428 Working length/width/height (mm): 5500 x 6878/2048 Deck size (mm): 2200 x 990 Screening media size (mm) → Several options available Loading height (mm): 2100 Emissions Stage 5 / Diesel Unladen weight 3,280 kg A single-deck vibrating screen for processing a wide variety of materials The screening plant is mounted on a car trailer chassis, allowing it to be towed behind any 4x4 or Jeep with a towing capacity of up to 3,500 kg. Transport to the construction site is very easy. Setup is very quick; the four legs are placed at each corner and the conveyor belts are unfolded. Iedpowk I Rrjfx Ah Ustr unfolded. Once the screening box and conveyor belts are running, the machine is ready for material. Ideally, it is fed using a small excavator, a skid steer loader, or a small telehandler with an appropriate bucket size. The screen mesh size can be easily changed to produce the desired product for the customer. With its compact design and impressive performance, the GP28 is a versatile machine for topsoil and aggregates. The small, efficient powerhouse ensures low operating costs and is easily accessible for service and maintenance.

Year of construction: 1989, condition: good (used), Alligator shear Bronneberg HS 110 Shear force: 350 Mp blade length: 900mm Knife opening: 340 mm (adjustable) Cutting strokes per. min. 10-40 Isdeir Ea Espfx Ah Ustr Power: 37 kW Electr. automatic and hand/foot operation Weight: 16 tons Immediately available

Condition: ready for operation (used), Screening machine Nordberg Bergeaud 18/45-2,5 Brand: Nordberg Bergeaud Type: CVB 1845 Surface: length 4500 mm, width 1800 mm – 2,5 Decks Itjdpfx Ajl Dgnqjh Uer Driving:15 kW E-motor Incl: springs.

Condition: good (used), Manufacturer: Mogensen Type: SK2046 Mach. No.: D 3220 Unbalance Motors: 2 Pcs. MO 1400/6 (6 kW / 980 RPM) Width: 2.000mm Ijdpjhu Hn Eefx Ah Uotr Decks: 4 Springs and frame included.

Condition: used, Year of construction: 2013, Price: On request - Year: 2013 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 Iedpfx Aowz Nxxoh Ujtr - Opening width [mm]: 3000 - Opening length [mm]: 1400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, functionality: fully functional, power: 147 kW (199.86 HP), fuel type: diesel, overall weight: 18,200 kg, Year of construction: 2000, operating hours: 2,370 h, JCB 456B Radlader Baujahr 2000 Itodowk Evfjpfx Ah Ujr 2,370 Betriebsstunden Total-Masse 18.200kg 147kW 1x Schaufel GUTER ZUSTAND Exportnettopreis 18,500.00 Euros alle Angaben ohne Gewähr/Irrtum vorbehalten