LKoreman Permanent Magnetic Conveyor Belt

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F876E01576L, Year of construction: 2013, operating hours: 16,860 h, load capacity: 12,000 kg, lifting height: 5,250 mm, fork length: 3,250 mm, fork width: 2,370 mm, empty load weight: 16,350 kg, TECHNICAL DETAILS Lifting capacity: 12,000 kg Lifting height: 5,250 mm Clearance height: 4,500 mm Fork length: 3,250 mm Maximum fork width: 2,370 mm Minimum fork width: 710 mm MACHINE DETAILS Fuel type: Diesel Number of wheels: 6 Attachment: Sideshift, fork positioner Dimensions & Weight Dimensions (L x W x H): 4,350 x 2,500 x 4,500 mm Unladen weight: 16,350 kg Operating hours: 16,860 h EQUIPMENT Pneumatic tyres Kwsdox Tqanopfx Ahzot Full cab Work lights License plate Heater Documentation CE marking

Condition: like new (used), Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, For sale is a mobile Lefort scrap shear. The machine is in very good condition and can be inspected at any time. Kwsdpox Elyaofx Ahzot

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516216E01234, Year of construction: 2014, operating hours: 5,586 h, load capacity: 2,000 kg, lifting height: 3,250 mm, free lift: 1,640 mm, fork length: 1,590 mm, fork width: 890 mm, TECHNICAL DETAILS Lifting capacity: 2,000 kg Lifting height: 3,250 mm Kodpfx Asx Tp T Hjhzswt Free lift: 1,640 mm Fork length: 1,590 mm Maximum fork width: 890 mm Minimum fork width: 370 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,051 mm x 1,149 mm x 2,160 mm Weight: 3,448 kg Number of wheels: 4 Drive: Electric Battery type: 625 Ah, 48 V Battery test result: 52% Year of battery manufacture: 2017 Operating hours: 5,586 h EQUIPMENT Fork adjustment Side shift Work lights Free lift

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: PB12093N2025005, shaft diameter: 155 mm, empty load weight: 450 kg, Equipment: documentation/manual, Unused profile bending machine, year of manufacture 2025! Ksdpfx Asx Tp N Ujhzewt TECHNICAL DETAILS Shaft diameter: 50 mm Roller diameter: 155 mm Capacity round diameter: 50 mm Shaft speed: 11 rpm Number of rollers: 3 pcs. MACHINE DETAILS Control: Conventional Power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,800 mm Net weight: 450 kg Transport packages: 1 pc. Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: new, functionality: fully functional, color: other, Year of construction: 2025, Equipment: cabin, hydraulics, The BS-20 concrete block machine is a fully automatic block production facility equipped with modern production technologies and a hydraulic system. Thanks to its PLC-controlled structure, it produces with high precision without the need for operator intervention. Operating at a pressure of 100-160 bar, the system has the capacity to produce 20 interlocks and 8 20x40x20 blocks per press. Furthermore, it minimizes labor requirements thanks to a collection robot that automatically stacks and packages dried products. The BS-20 offers an environmentally friendly production approach with its A+ energy-efficient motor system, EFF3 class electric motors, and low energy consumption. It meets European quality standards with its ISO 9001:2008 quality management system, CE certificate, and DIN-TSEK compliant structure. It provides a user-friendly experience with its automatic/manual switching system that increases operational flexibility, remote fault detection via the internet, and forklift-compatible design. BS-20 Concrete Block Machine Technical Specifications Production Capacity: 100–110 pallets per hour Pallet Size: 1,000 x 920 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.2 m³ Hydraulic Oil Capacity: 400 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Product Height (max): 3,000 mm Product Length (max): 600 mm Machine Chassis: 10 mm Production in 8 Hours: 8,000 blocks / 18,000 interlocks Why Should You Choose the Constmach BS-20 Concrete Block Making Machine? The BS-20 Concrete Block Machine offers high efficiency, low operating costs, and long-lasting use for medium-sized businesses. Manufactured with the assurance of CONSTMACH engineering, this system delivers uninterrupted production performance thanks to its automation capabilities and robust construction. With spare parts warranty, fast service network, and 24/7 technical support, CONSTMACH ensures your investment operates reliably for many years. Therefore, by choosing the BS-20 model, you can maximize both your production quality and operational efficiency. Kwodjxp Uwyspfx Ahzjt What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 60 t, stroke length: 380 mm, table width: 260 mm, table length: 1,000 mm, throat depth: 750 mm, Unused hydraulic press, year of manufacture 2025! TECHNICAL DETAILS Capacity: 60 t Max. stroke: 380 mm Height adjustment: 750 mm Throat depth: 750 mm Adjustment length: 100 mm Table width: 260 mm Table length: 1,000 mm Kwedjx Tpy Tspfx Ahzet Number of columns: 2 MACHINE DETAILS Motor power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 2,200 mm Net weight: 540 kg Transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: ready for operation (used), Year of construction: 2025, operating hours: 57 h, functionality: fully functional, machine/vehicle number: 24111638, overall weight: 11,600 kg, cutting height (max.): 940 mm, table width: 1,050 mm, table length: 6,000 mm, Equipment: CE marking, Band saw from 2025 with only 57 operating hours! Sale due to business closure. TECHNICAL DETAILS Max. cutting height: 940 mm Table length: 6,000 mm Table width: 1,050 mm Saw orientation: Horizontal Kwodpfxex Tpx No Ahzot MACHINE DETAILS Weight: 11,600 kg Protection: 100 A Total power: 51 kW Main motor power: 30 kW Operating hours: 57 hours EQUIPMENT Documentation CE marking CE certificate

Condition: new, functionality: fully functional, power: 367.75 kW (500.00 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 4,250 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, 🇬🇧Iveco T-Way 500 Equipment CIFA RY 1300 ADVANCE concrete mixer • Anti-wear protection for 25x8 mm propellers • Two manholes • Rolling rollers diam. 250 mm with balance support • Central reduction gear • Water tank, capacity 1200 | + 80 litre oil tank • W a t e r • Quick water connection on both sides • Concrete consistency detection pressure gauge • Double electro-hydraulic controls (one push-button panel in the truck cabin and one rear, removable, with 3 m of cable) • Two additional chute sections, with fixing supports on the subframe • Four-start, edged propellers at the unloading point • Wear-resistant plates on the loading hopper and unloading chute • Unit completely sandblasted and protected with anti-rust primer • Water pump and chute lifting cylinder, hydraulically operated by the distributor • Heat exchanger • Approved folding rear underrun protection bar • Emergency Start/Stop buttons for the vehicle engine Optional • No. 2 additional chute sections > EKOS CAP - POSSIBILITY OF CUSTOM FINANCING OR LEASING ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS 0 DOWN PAYMENT TEL. -0823 1686306 -335 6713062 -377 7064530 Kjdev Apf Njpfx Ahzjwt OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 SATURDAY 08:30/14:00 WE OFFER A WIDE CHOICE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder- 770s-limited edition-660 S semi-trailer-refrigerated semi-trailer - Lamberet-schmitz ISUZU-FIXED BODY-CRANE-TIPPING-TARPAD-BOX-TAIL LOADER-COLD BOX-INSULATED WITH FRIDGE - VAN

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AB/226310, total length: 4,300 mm, total width: 1,880 mm, total height: 2,350 mm, empty load weight: 1,310 kg, MACHINE DETAILS Dimensions & Weight Kjdpfx Ahox Tpv Iezewt Dimensions (L x W x H): 4,300 x 1,880 x 2,350 mm Unladen weight: 1,310 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting length (max.): 2,200 mm, cutting width (max.): 4,300 mm, stack height: 560 mm, working height: 920 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm Lift table width: 1,600 mm Working height: 920 mm Saw blade projection: 110 mm Program fence speed: 90 m/min Saw carriage speed: 130 m/min Max. stack height without pit: 560 mm Max. stack weight: 4 t MACHINE DETAILS Main saw motor: 13.5 kW Scoring unit motor: 2.2 kW Average air consumption: 210 Nl/min Ksdpex Tptmjfx Ahzswt Transport packages: 8 pcs.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Compact Shredder typ PYTHON-XL 1600, with 15 KW electricmotor, 400V 50Hz• • Electric motorreductor 15KW, 400V, 3phs, 50Hz 40% MORE torque compare PYTHON 1600 Standard • Opening 1600 x 1000 mm • Main dimensions L 2700 x B 1400 x H 2600mm • Discharge opening 400x 100mm • Height discharge opening ca 1000mm • Electrical control box with INVERTER, main switch, selector switch on / off switch and emergency stop • Easily moved either with forklift or by means of lifting eyes • Weight approx. 2700 kg • Comprehensive machine manual Ksdpfx Aof N Nlgshzewt • Finishing in RAL 3002 and RAL 7022 • (Subject to technical changes) • CE certified and "Made in Holland"

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AH/121500, travel distance X-axis: 2,486 mm, travel distance Y-axis: 1,255 mm, travel distance Z-axis: 150 mm, table width: 1,290 mm, table length: 2,570 mm, TECHNICAL DETAILS Travel X-axis: 2,486 mm Travel Y-axis: 1,255 mm Travel Z-axis: 150 mm Maximum X-axis stroke: 3,120 mm Maximum Y-axis stroke: 1,685 mm Maximum Z-axis stroke: 250 mm Table length: 2,570 mm Table width: 1,290 mm Tool changer positions: 8 units MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,870 x 1,900 x 2,300 mm Unladen weight: 2,500 kg Transport packages: 1 unit Kwedpox Tppnofx Ahzet EQUIPMENT CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 6,186 h, load capacity: 3,000 kg, lifting height: 5,250 mm, mast type: simplex, construction height: 3,370 mm, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 5,250 mm Load center: 500 mm Overall height: 3,370 mm Mast type: Simplex Fork carriage width: 1,100 mm Fork length: 1,200 mm MACHINE DETAILS Fuel type: Electric Front tires type: Superelastic Front tires condition: 80 - 100% Kwjdpfxox T A Scj Ahzot Rear tires type: Superelastic Rear tires: Brand new Rear tires condition: New Battery voltage: 80 V Battery capacity: 620 Ah Battery condition: Refurbished and tested at 91% Battery type: PzS Battery year: 2019 Battery condition: 80 - 100% Operating hours Key On hours: 6,186 h Drive and lift hours: 4,265 h EQUIPMENT Side shifter 3rd valve 4th valve Rear work light Front work light

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded Kedpfx Ahjd Dzahezowt 420 x 250 x 100mm completely welded housing Ring eyelets for suspension

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 4a99688d-3381-4979-8e5b-43, Year of construction: 2022, operating hours: 164 h, empty load weight: 530 kg, construction height: 525 mm, construction width: 400 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item by the deadline of 28/02/2026! Hardly used demonstration machine! TECHNICAL DETAILS Build volume (single nozzle): 525 × 400 × 400 mm Build volume (multi-nozzle): 500 × 400 × 400 mm Build chamber volume: 84 l Kwjdpfx Aex Ttifjhzet Layer height: min. 50 µm, max. 250 µm Accuracy: ±125 µm or ±0.0015 mm per mm Process: Fused Filament Fabrication, Continuous Fiber Reinforcement MACHINE DETAILS Temperature control: up to 200 °C Extrusion system: Direct-drive print head with two nozzles Materials Thermoplastics: Vega™, ULTEM™ 9085 filament, Onyx®, Onyx FR Continuous fibers: Carbon Fiber, Fiberglass, Aramid Fiber (Kevlar®), High Temperature Carbon Fiber, Carbon Fiber FR Dimensions & Weight Machine dimensions: 1,325 × 900 × 1,925 mm Weight: 530 kg Print head weight: 3 kg Operating hours: 164 h EQUIPMENT Eiger software Direct-drive print head with three nozzles Compatible with various thermoplastic and fiber materials Ethernet port IEC/UL/CSA 62368-1 certification CE mark EU Machinery Directive compliance