Stainless Steel Tank 300–340 HL

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Ijdpfxjyn Nybe Abvotd Note: No tools included, special transport required.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, For sale on behalf of a customer is a Segem ERT 100. The machine was operational until removal. The rotor bearing was replaced in September 2023 (approx. 2000 hours). Iedpfxsxhf N Dj Abvstd

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, load capacity: 1,500 kg, fork length: 1,100 mm, overall weight: 3,350 kg, total length: 3,100 mm, total width: 1,000 mm, TECHNICAL DETAILS Lifting capacity: 1,500 kg Isdoyt Nl Iepfx Abvjtd Fork length: 1,100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,000 x 2,000 mm Weight: 3,350 kg EQUIPMENT Charger

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Wave soldering system with comprehensive equipment! A spare parts package worth approximately €20,000 is included in the sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F Iodpfxeyt Nlbo Abvetd - Fluxer SelectFlux - Streamline transport system including lifts TECHNICAL DETAILS - PULSAR preheating: 2 convection and 5 pulsar preheating zones (3,300 mm length) - Wetting length (soldering system): 40 mm + 30 mm - Return transport level: raised 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS - Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit - Foldable convection top heater - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7-row - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. timer control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen economizing circuit - Transponder system for automatic switching of soldering programs - Selective flux module (external unit) - Flow sensor for flux per spray head - Flux reservoir tank with connections - Replacement filters for external spray fluxer module – upper and lower machine sections - Spare PC

Condition: like new (used), functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, gearing type: hydrostat, Year of construction: 2024, operating hours: 75 h, Agria 5900 Taifun Professional Hydro equipment carrier Technical details: Kawasaki 2-cylinder four-stroke petrol engine 23hp with electric start Gearbox: stepless hydrostatic drive with single-disk dry clutch Speeds: Forward: 0-7 km/h, Reverse: 0 - 3.6 km/h Steering bar: rubber-mounted and height and side adjustable without tools Steering: power steering (handle active steering) Tires: 23 x 8.50 - 12 AS Standard equipment: tires, service and parking brake, operating hour meter, manual start, electric starter, socket Fuel: unleaded petrol Weight: approx. 221.00 kg Special features: Intuitive steering with minimal effort thanks to Holm active steering Patented easy-control control unit for intuitive control Powerful professional motors guarantee sufficient power for all attachments Portal axle for shifting the center of gravity depending on local conditions and the attachment used Clearly visible even in poor visibility conditions thanks to LED safety lighting Standard support foot for convenient parking of the machine without an attachment Hydraulic safety valve: for secure hold even on steep slopes Optimized air intake reduces sucking in of dirt and dust Central parking brake Stepless hydrostatic drive for ideal adjustment of the working speed Robust and low-maintenance construction for continuous use under the toughest conditions Standard with operating hour counter Agria mounting flange for positive and non-positive connection between the base and attachment Powerful motors guarantee fast work with professional attachments Easy movement of the machine even without the engine running by releasing the wheels Possible Attachments Green space management: mowing, mulching, baling and belt rake Soil management: reversing tillers, harrowing Property and path maintenance: weed removal, snow clearing, snow blowing, spreading, sweeping Woodland maintenance: chopping bushes This Agria 5900 Cyclone Hydro tool carrier was built in 2024, has around 75 operating hours and has been used as a demonstration machine to date. The Cyclone is in as good as new overall condition, with minor signs of wear and tear, ready for immediate use. Sold as a used machine with no return, guarantee or warranty. Net price €18,479 // Gross price €21,990 Ijdpfx Abjv Ecdkevstd - Inspection / test drive possible - Shipping costs €180 nationwide by freight forwarder! - Financing / leasing can be requested individually for you!

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 003002, paper weight (min.): 35 g/m², paper weight (max.): 209 g/m², paper width (max.): 738 mm, paper height (max.): 1,300 mm, TECHNICAL DETAILS Max. paper size: 738 x 1,300 mm Min. paper size: 210 x 297 mm Sheet height: 1,200 mm Paper weight: 35 to 209 g/m² MACHINE DETAILS Power supply: Three-phase, 400 V Current: 12.6 A Connected load: 5.3 kW Dimensions (L x W x H): approx. 4,380 x 1,870 x 1,680 mm EQUIPMENT PFU-74F pallet feeder User-friendly touchscreen control panel Isdoyrnz Espfx Abvjtd 6 folding pockets First knife fold and 2 pockets under the knife Second knife

Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder! Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit! Hussmann ES35 x 30D TECHNICAL DETAILS Screw diameter: 35 mm Length: 30D MACHINE DETAILS Motor power: 16 kW Operating hours: 297 h Cutoff Saw TECHNICAL DETAILS Three-phase motor speed: 3,000 rpm Three-phase motor output: 0.55 kW Saw blade diameter: 200 mm Haul-off Unit TECHNICAL DETAILS Itsdpfx Ajyrmzqobved Haul-off speed: 20/30/40/50/60 m/min Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N Contact length: 800 mm Max. belt width: 160 mm Max. profile height: 160 mm MACHINE DETAILS Drive power: 2 - 5.6 kW Weight: 800 kg EQUIPMENT Complete electrical and electronic control system with remote control box Digital speed display Ammeter 10-step helical potentiometer

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Itedencd Azjpfx Abvjd Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, overall weight: 2,500 kg, grinding height: 200 mm, The machine is equipped with the following processing units (further details can be found in the attached document): 1. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 1. Sanding roller in grooved steel design 2. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) Itjdpeyub R Esfx Abved 2. Sanding roller in grooved steel design 3. Contact roller unit (250 mm diameter / cutting speed 18 m/sec / sanding belt 1370 x 2620 mm) 3. Sanding roller, 85 Shore TECHNICAL DETAILS Sanding height: 3 - 200 mm Sanding width: 1,350 mm Sanding belt dimensions: 1,370 mm x 2,620 mm Feed speed: 2.8 - 20 m/min MACHINE DETAILS Extraction connection: 3 x 200 mm Motor power: 18.5 kW (25.0 HP) Motor voltage: 50/60 Hz Electrics: 3x400V 50Hz CE version Vacuum table with blower: 4 kW (5.5 HP) Reversing function: 3 Weight: 2,500 kg EQUIPMENT Feed table with electric height adjustment 3 motors: 18.5 kW (25 HP) each with SD start sanding belt brake Touch screen control with color display Additional extraction connection Note: The machine is delivered without a power cable. The electrical connection must be provided on site.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar passage: 34 mm, controller model: Fanuc 21T Modell B, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bar capacity: 34 mm MACHINE DETAILS CNC control: Fanuc 21T Model B Itodpfxjyrf Enj Abvjd EQUIPMENT CS axis left CS axis right Approx. 26 fixed tool holders 2x driven tool holders (1x axial, 1x radial) Hainbuch collet chucks left and right Chip conveyor Manuals Note: The bar feeder is not included in the offer.

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 0392, Feeding width (mm): 500 Kw: 7.5 A: 380 Iodpfodt Rthsx Abvjtd

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, overall weight: 8,700 kg, workpiece length (max.): 165 mm, workpiece diameter (max.): 35 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Max. output: 7,200 bottles/h Product dimensions Max. preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Max. neck finish diameter: 38 mm Neck height: 9–27 mm Max. bottle height: 350 mm Max. bottle diameter: 105 mm Max. bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow module: 6,300 kg Control cabinet: 1,200 kg Preforms feeder: 1,200 kg Total weight: 8,700 kg Itodpjyrfvgofx Abvod Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10 % Frequency: 50 Hz ±1 % Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 207000046, paper weight (min.): 50 g/m², paper weight (max.): 300 g/m², production capacity: 19,680 unit/h, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer: €143,250! Production printer with the following configuration: - Input Interface Module-B1 - Paper Input Module Standard-B1 - Paper Input Module Optional-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Printing speed A4: up to 328 ppm Printing speed A3: up to 171 ppm Maximum monthly print volume: up to 10,000,000 A4 pages Resolution: 600 x 1,200 dpi Paper specifications: Total paper weight range: 50 gsm – 300 gsm Plain paper (Canon recommended media): 50 – 300 gsm Coated media (Canon recommended media): 80 – 250 gsm Paper format: 203 x 203 mm to 350 x 500 mm MACHINE DETAILS Main unit dimensions: Main unit dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm Main unit weight: 779 kg Meter readings: A4 simplex: 67,535 A4 duplex: 52,601,622 A3 simplex: 0 A3 duplex: 3,853 SYSTEM CONFIGURATION Itjdpfx Aoyrd Rcjbved - 4x Paper Input Module - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript - Streaming & PrismaSync

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Iedovbquiepfx Abvjtd Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 23-07-12-045, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, table height: 910 mm, cutting width at rip fence: 1,000 mm, The machine is in very good condition with minimal signs of use! The machine was used for processing aluminum. TECHNICAL DETAILS Maximum blade diameter: 550 mm Cutting width at CNC parallel fence: 1,000 mm MACHINE DETAILS Machine height: 910 mm Motor power: 7.5 kW EQUIPMENT Table extension: (length: 840 mm) Double roller carriage (length: 3,000 mm) 2 pneumatic quick clamps (application range: 0–90 mm) Eye-level control panel Itedpfx Absytpxnsvsd Template holder directly at the control unit Increased cutting height including saw blade tilting TIP-SERVO DRIVE CNC angle fence UNO 90 Additional cross slide incl. connection Front support roller Air cushion table Spray device Note: The machine comes from a business liquidation, has been professionally dismantled and placed in storage.