Round rolling machines motor-driven 6,1 - 14mm thickness for sale
Identified location: Ashburn (US) (Edit)
sheet width 1050 mm
plate thickness 10,0 mm
pre-bending 14,0 mm
diameter of upper rolls 210 mm
side roll diameter 185 mm
engine output 12,0 kW
voltage 380 V
range L-W-H 3700 x 1450 x 1150 mm
Bk0moiczym
4
sheet width 3050 mm
plate thickness 12 mm
pre-bending 8 mm
diameter of upper rolls 310 mm
diameter of lower rolls 300 mm
roll speed 4000 mm/min
central lubrication ja
cone-bending device ja
total power requirement 24 kW
weight of the machine ca. 9800 kg
dimensions of the machine ca. 5300 x 1700 x 1800 mm
extended roll ends for ring bending
Main drive hydraulica1
Bqa7f7n2ev
set of ring bending rolls included
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
Jwog2m
-driven: electric
-Max. Sheet width: 2500 mm
-Max. Sheet thickness: 10.0 mm
-Roller diameter below: 182 mm
-Upper roller diameter: 215 mm
-Delivery via: transmission
-Dimensions: 4510/1150/H1590 mm
3
Hydraulic 4-roll round bending machines
Type Bending length (mm) Bending capacity mm Upper rolls Ø mm
Bottom rolls Ø mm Side rolls Ø (mm, motor power (kW)
Length (mm) Height(mm) Width mm,Weight (kg)
E2bd8g0ay
4R OHS 1570 x 150 1570 6,0 150 150 130 4,0/3,0 3350 1200 1210 2470
4R OHS 1570 x 180 1570 9,0 180 150 4,0/3,0 3400 1400 1290 3000
4R OHS 1570 x 200 1570 11.0 200 180 4.0/3.0 3400 1400 1290 3350
4R OHS 1570 x 220 1570 12.0 220 220 180 4.0/3.0 3550 1550 1470 4350
4R OHS 1570 x 250 1570 15.0 2...
Suitable for rounding iron sheet up to 450 N / mm² tensile strength,
at a yield strength of 240 N / mm².
Sheet width 400 mm
Sheet thickness when bending 25 mm
Sheet thickness when rounding 30 mm
Upper roll diameter 135 mm
Side roll diameter 100 mm
Bottom roll diameter 135 mm
Main motor 18,38 kW
Drive speed 4 m / min.
Bshshndcpp
Ejection device
Display device for the correction of the target diameter
Weight of the machine approx. 6500 kg
9
Specificaties
US standaard Metrisch
Wals breedte
4.000 mm
Plaatdikte bij product 3x bovenrol Ø
8 mm
Plaatdikte bij product 5x bovenrol Ø
10 mm
Plaatdikte bij aanbuiging
7 mm
Bovenrol Ø
285 mm
Zijrol Ø
265 mm
Aantal rollen
3
Wals snelheid
5 m/min
Besturing
Digital Read Out
Aantal aangedreven rollen
3
Vermogen kW
Bnbcfgmwfo
15 kW
Afmetingen
Lengte
6.600 mm
Breedte
2.000 mm
Hoogte
2.000 mm
Gewicht
9.000 kg
Downloads
hardned rolls
digital positioning
conical bending
Wals breedte: 4.000mm
Plaa...
6
sheet width 2600 mm
plate thickness 13,0 mm
pre-bending 10,0 mm
diameter of upper rolls 270 mm
side roll diameter 210 mm
Beoajz0mxk
diameter of lower rolls 250 mm
total power requirement 11,0 kW
weight of the machine ca. 7200 kg.
range L-W-H 5.022 x 1.520 x 1.438 mm
5
sheet width:3100 mm
plate thickness:10 mm
pre-bending:6/8
diameter of lower rolls:260 mm
upper roll diameter:285 mm
side roll diameter:200 mm
total power requirement:9 kW
weight of the machine ca.:8 t
dimensions of the machine ca.:5,2 x 1,4 x 1,3 m
Pu2dky
4 roll hydraulic plate bending machine with pre-bending device and digital readout.
Three-roll round, three-roll sheet bending machine, bending machine, sheet round bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet rolling machine
-Manufacturer: Reinhardt
-Type: RAS 44.20
-Drive: electric, 1.1 kW
-Max. Sheet width: 1270 mm
-Max. Sheet thickness: 3.0 mm
Von8arej
-Roller diameter: 3 x 92 mm / 1 x 98 mm
-Delivery via spindles
-Top roller: can be swiveled to bend (bend without attachment)
-Dimensions: 1810/800 / H1130 mm
-Weight: 700 ...
7
Max. Bending length: 3,000 mm Max. Sheet thickness: 10 mm steel Motor-driven back roll feed Roll diameter: 270 mm Right and left rotation via foot switch Weight: 9,000 kg
Bolvetlsg2
4
sheet width: 2500 mm
plate thickness: 7,5 mm
pre-bending: 4,5
daylight opening: 200 mm
distance between columns: 2570 mm
roll dia. top roll: 1 Stück Ø 200 x L: 2550 mm
roll dia. bottom roll: 2 Stück Ø 200 x L: 2550 mm
weight of the machine ca.: 5,0 t
dimensions LxWxH: 4,7 x 1,6 x 1,8 m
Hufjqgehc
total power requirement: 12,5 kW
other technical features:
- upper roller: chain drive, with hinged bearing, adjustment travel of the roller vertical 130mm motorized
- lower roller: gear drive, adjustmen...
1
bending length: 2100sheet thickness: 8upper roll diameter: 190
Technical specifications:
- Hardened and polished rolls
- Conic bending device
Bdf7kxa7om
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are h...
9
sheet width 2600 mm
plate thickness 10,0 mm
pre-bending 8,0 mm
diameter of upper rolls 230 mm
side roll diameter 190 mm
diameter of lower rolls 210 mm
total power requirement 7,5 kW
weight of the machine ca. 5.560 kg.
range L-W-H 4.650x1.380x1.300 mm
Kxkx3l3b
Ausstattung:
- hydr.-4 Walzen Rundbiegemaschine
- Konischbiegeeinrichtung
- Induktionsgehärtete Walzen
- Digitalanzeige für die beiden Seitenwalzen
- fahrbares Bedienpult
- 2 Geschwindigkeiten
- hydr.-Klapplager
- Bed. Anleitung
- CE-Zei...
1
Bending capacity 12 mm
Bending 8 mm
Delivery time approx. 8 weeks from order placement
Bending capacity: 12 mm
Ysmci0
Bending: 8 mm
Bending length: 3,100 mm
top roller diameter: 270 mm
Lower roller diameter: 250 mm
side roller diameter: 220 mm
max. opening: 50 mm
working height: 1.155 mm
Length: 5,310 mm
Width: 1.660 mm
height: 1.590 mm
Engine power: 15 kW
Weight: 9.700 kg
Standard equipment:fully hydraulic drive of upper and lower roll (from 30 mm bending capacity of all four rolls)via planetar...
3
4roll 2000x8 mm dual initial pre-bending
Model MG M2008_NEXUS
Capacity:
-Width of plate: 2000 mm
-Thickness plate: 8 mm
-Pre-bending : 6 mm
Configuration:
-length of rolls 2050 mm
-top roll Ø190mm
-lower roll Ø170mm
-4Kw electric motor on hydraulic pumps.
-Power supply 400/50 – 480/60
D8hjc9h
Configuration:
-Hardened rolls, finishing smooth suitable stainless steel plates
-Conical plates roll bending hydraulic.
-CNC_EVO 5 axis, autocalc programs with drawing of the piece – bending multi-radiu...
5
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
-electric: powered
-Max. Sheet width: 2030 mm
-Max. Sheet thickness: 5.0 mm
Nljgh
-Roller diameter below: 142 mm
-Upper roller diameter: 142 mm
-Delivery via: spindles
-Upper roller can: be swiveled to bend (bend without approach)
-Dimensions: 2550/820/H1395 mm
-Weight: 1460 kg
5
sheet width:3000 mm
plate thickness:8 mm
weight of the machine ca.:5,5 t
dimensions of the machine ca.:4,5 x 1,2 x 1,4 m
Hydr. 4 roll DAVI Plate bender
Bkquzzrzkw
Top / Lower roll Ø : 220 mm / 200
pre bending
Hydraulic Drop end
Conical bending
last software update in 2018
1
bending length: 3100sheet thickness: 6upper roll diameter: 210
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydraulic po...
8
sheet width 3100 mm
plate thickness 13,0 mm
D90hykems
pre-bending 10,0 mm
diameter of upper rolls 300 mm
side roll diameter 210 mm
diameter of lower rolls 270 mm
total power requirement 11,0 kW
1
Bending capacity 20 mm
Bending 16 mm
Delivery time approx. 8 weeks from order placement
Bending capacity: 20 mm at 3x top roll end.
Bending: 16 mm at 1.5x top roll end.
bending length: 3.100 mm
Bjt298edm9
top roller diameter: 360 mm
bottom roller diameter: 330 mm
side roller diameter: 270 mm
max. opening: 60 mm
working height: 1.510 mm
Length: 5,560 mm
Width: 2,060 mm
Height: 2.050 mm
Engine power: 22 kW
Weight: ~ 19.000 kg
Standard equipment:fully hydraulic drive of upper and lower roll (from 3...
3
3 roll hydraulic - Faccin HCI model 2550 x11/8 mm
Matr.9011835.56 -year1990
Power electric V380/50 - Kw 11
Dimension 5100X1150X h 1400mm
Weight 6500 Kgs
Capacity
Plate width 2500 mm
Plate thickness 11 mm
Pre-bending thickness 8 mm
Upper roll 260 mm
Side rolls 240 mm
Total length 2550 mm
3 rolls driven powered hydraulic with axial gear unit
Rolls surface high strength with hardening treatment
Conical bending attachment hydraulic with contrast roller ha...
10
OSTAS HYDRAULIC 4 ROLL PLATE ROLLER
TYPE 4R OHS 2070 x 250
- Capacity 2070 x 12 mm
- 4 rolls
- NC control
- Capacity 2070 x 12
- Hardened rollers
- Diameter top roll 250 mm
- Diameter bottom roll 250 mm
- Diameter side rolls 200 mm
- Hydraulic system
- Digital display for movement left roller
- Digital display for movement middle under roller
- Digital display for the movement of the right roller
- Upper roller is hydraulically foldable
- Steel construction ST-52
- Hydraulic drop end for easy ro...
1
sheet width 2000 mm
plate thickness 8 mm
pre-bending
total power requirement 7,5 kW
weight of the machine ca. 3,6 t
2r79g3
dimensions of the machine ca. 3600x1250x1350 m
1
bending length: 2600sheet thickness: 10upper roll diameter: 230
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydraulic p...
8
sheet width 4100 mm
plate thickness 8,0 mm ST
pre-bending 6,0 mm ST
diameter of upper rolls 300 mm
side roll diameter 210 mm
diameter of lower rolls 270 mm
total power requirement 7,5 kW
weight of the machine ca. 9.930 kg.
dimensions of the machine ca. 6532 x 1730 x 1489 mm
Bncd2oky8
1
Bending capacity 20 mm
Bending 16 mm
Delivery time approx. 8 weeks from order placement
Bending capacity: 20 mm at 3x top roll end.
Bending: 16 mm at 1.5x top roll end.
bending length: 2.050 mm
top roller diameter: 300 mm
Lower roller diameter: 270 mm
side roller diameter: 220 mm
Fhxcx77y8
max. opening: 50 mm
working height: 1.140 mm
Length: 4,260 mm
Width: 1.660 mm
height: 1.590 mm
Engine power: 18,5 kW
Weight: ~ 10.000 kg
Standard equipment:fully hydraulic drive of upper and lower roll (from 3...
3
Hydraulic 3 roll plate bending machine
Plate width 3100 mm
Plate thickness 8 mm
Pre-bending 6 mm
Top roll dia. 220 mm
Side rolls dia.200 mm
Surface length of the rolls 3100 mm
Power electric installed 10Hp -400/50 -480/60
Bjbsjr0plw
Configuration installed:
Hardened rolls
Hydraulic power driven of the 3 rolls with axial gearbox and hydraulic motor independent.
Console command electric manual operation with CNC digital readout controller
Conical hydraulic plate bending with hardened contrast p...
sheet width 3040 mm
plate thickness 7 mm
pre-bending ja
roll diameter 225 mm
main drive 11 kW
back roll setting 4 kW
weight of the machine ca. 5,3 t
dimensions of the machine ca. 4,4 x 1,15 x 1,47 m
Beocr7w8g3
Condition: ready for operation
Electric 380 Volt
Foot pedal
Light barrier control
German quality product with asymmetrical roller arrgement and pre-bending,
conical bending by tilting the rear roller and bottom roller via manual tooth
coupling. Working area secured by photoce...
3
sheet width 1000 mm
plate thickness 8,0 mm
distance between columns 1070 mm
diameter of upper rolls 150 mm
pre-bending capacity 6,o mm
connected load 4,0 kW
weight of the machine ca. 1,4 t
dimensions of the machine ca. 2,6 x 0,65 x 1,1 mm
- Electrically adjustable rear roller
- Electrically adjustable lower roll (material clamping)
- Digital readout for rear roller movement
Blopwno8kz
- Digital readout for lower roll movement (material clamping)
- Hardened rolls
- Conical rolling
- Swiveling ...
1
bending length: 1600sheet thickness: 8upper roll diameter: 190
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
Nhhsn
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hydrau...
8
sheet width 4100 mm
plate thickness 13,0 mm ST
pre-bending 10,0 mm ST
diameter of upper rolls 360 mm
side roll diameter 250 mm
diameter of lower rolls 330 mm
total power requirement 11,0 kW
Bov9dsgssb
weight of the machine ca. 16.000 kg.
dimensions of the machine ca. 6542 x 1677 x 1900 mm
1
Bending capacity 8 mm
Bending 6 mm
Delivery time approx. 8 weeks from order placement
Bending capacity: 8 mm at 3x top roll end.
Bending: 6 mm at 1.5x top roll end.
bending length: 3.100 mm
top roller diameter: 230 mm
Lower roller diameter: 210 mm
side roller diameter: 190 mm
max. opening: 30 mm
working height: 825 mm
Length: 4,880 mm
N30uz
Width: 1.160 mm
Height: 1,180 mm
Engine power: 11,0 kW
Weight: ~ 6.700 kg
Standard equipment:fully hydraulic drive of upper and lower roll (from 30 mm bendin...
6
WILHELM SCHAFER - SVRM - 1972- 2500 mm - thickness 8/6 mm
N02lz
6
OSTAS PLATE ROLLER
TYPE 4R OHS 1570 X 200
- 4 Rolls
- Capacity 1570 x 9
- Hardened rollers
- Diameter above roll 200 mm
- Diameter under roller 200 mm
- Diameter side roll 180 mm
- Hydraulic system
- Digital display for movement left roller
- Digital display for movement middle under roller
- Digital display for the movement of the right roller
- Upper roller is hydraulically foldable
- Steel construction ST-52
- Hydraulic drop end for easy roll positioning
- Hydraulic up and down movement syste...
9
4-roll round bending machine from FACCIN
- 2000mm width
- max. material thickness 9mm
- max. bending 8mm
Brbjga2ey7
- connected load: 9kw
- weight: 4500kg (machine) + console approx. 100-200kg
- other: mobile console with digital display; bearings and rollers overhauled by Faccin in 2017; machine is under power and can be inspected
1
bending length: 2100sheet thickness: 10upper roll diameter: 210
Bdf7kd8sgk
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are ...
8
sheet width 3100 mm
plate thickness 16,0 mm ST
pre-bending 20,0 mm ST
diameter of upper rolls 360 mm
side roll diameter 250 mm
diameter of lower rolls 330 mm
total power requirement 15,0 kW
Bp0dwpmjk7
weight of the machine ca. 13.200 kg.
dimensions of the machine ca. 5542 x 2100 x 1983 mm
1
Bending capacity 13 mm
Bending 10 mm
Delivery time approx. 8 weeks from order placement
Bending capacity: 13 mm at 3x top roll end.
Bending: 10 mm at 1.5x top roll end.
bending length: 3.100 mm
top roller diameter: 300 mm
Lower roller diameter: 270 mm
side roller diameter: 220 mm
max. opening: 50 mm
working height: 1.140 mm
Length: 5,310 mm
Width: 1.660 mm
height: 1.590 mm
Engine power: 15 kW
Weight: ~ 12.300 kg
Standard equipment:fully hydraulic drive of upper and lower roll (from 30 mm bending...
15
SAHINLER - 4R HS 15-170 - 2006- 4 rolls hydraulic bending rolls- useful length 1550 mm- max material thickness 8 mm- max material thickness for prebending 4 mm- central rolls 170/160 mm- side rolls 150 mm- weight 1950 kg
Dpfberh9
6
OSTAS PLATE ROLLER
TYPE SMR-S 1070 x 150
- Capacity 1070 x 8 mm
- Electric adjustable back roller
- Electrically adjustable bottom roller (material clamping)
- Digital readout for rear roller movement
- Hardened rollers
D8v7p89uw
- Conical rollers
- Swivelling top roller
- Central lubrication system
- Emergency stop
- Documentation Digital readout for bottom roll movement (material clamping)
- Hardened rolls
- Conical rollers
- Upper roll that can be swung away
- Central lubrication system
- Bra...
2
1
bending length: 2600sheet thickness: 8upper roll diameter: 210
Bdf7j0nmsj
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are h...
8
sheet width 3100 mm
plate thickness 8,0 mm ST
pre-bending 6,0 mm ST
diameter of upper rolls 230 mm
side roll diameter 210 mm
diameter of lower rolls 190 mm
total power requirement 7,5 kW
Oolh2
weight of the machine ca. 6.020 kg.
dimensions of the machine ca. 5142 x 1390 x 1300 mm
1
Bending capacity 13 mm
Bending 10 mm
Delivery time approx. 8 weeks from order placement
Bending capacity: 13 mm at 3x top roll end.
Bending: 10 mm at 1.5x top roll end.
bending length: 2.550 mm
top roller diameter: 270 mm
Lower roller diameter: 250 mm
Cupim32
side roller diameter: 220 mm
max. opening: 50 mm
working height: 1.155 mm
Length: 4,760 mm
Width: 1.660 mm
height: 1.590 mm
Engine power: 15,0 kW
Weight: ~ 10.600 kg
Standard equipment:fully hydraulic drive of upper and lower roll (from 30 ...
5
gebr. hydr. CNC 4 rolls round bending machine
make STÖLTING
model VB 322
make no.: M 1591
year of manufacture 2000
working length 1000 mm
Bale length 1100 mm
sheet thickness:
Normal bending 12 mm
Bending 8 mm
top rollers Ø 205 mm
Bottom rolls Ø 210 mm
side rolls Ø 169 mm
motor 5,5 kW
external dimensions:
Length 3200 mm
width 1370 mm
height 1300 mm
Weight approx. 3200 kg
With:
CNC control Acon
Bpppevimig
Container support mast with pusher
Collecting tray with rollers
Infeed roller table left
Auto...
6
OSTAS PLATE ROLLER
TYPE 4R OHS 2070 X 220
- 4 Rolls
- Capacity 2070 x 10
- Bending capacity 2070 x 8
- Hardened rollers
- Diameter top roll 220 mm
- Diameter under roller 220 mm
- Diameter side rolls 180 mm
- Hydraulic system
- Digital display for movement left roller
- Digital readout for movement middle under roller
- Digital readout for movement right roller
- Hydraulic up and down movement system with intermediate roller
- Hydraulic readout for easy roller positioning
- Hydraulic up and down...
2
1
bending length: 2100sheet thickness: 13upper roll diameter: 230
Technical specifications:
- Hardened and polished rolls
- Conic bending device
- Digital readout for side rolls
T9a9kjkh
- Complete body made of ST-52 Steel
- Portable control panel separated form machine
- Rolls are mounted with bearings
- Top roll cover, openable and closeable by hydraulic, controlled from control panel.
- All rolls are driven by hydraulic motor and planetary gearbox
- Side rolls upwards downwards movements are hy...
10
sheet width 4100 mm
plate thickness 10,0 mm ST
pre-bending 8,0 mm ST
diameter of upper rolls 320 mm
side roll diameter 240 mm
diameter of lower rolls 320 mm
speed 1,5 / 5,0 m/min
total power requirement 20,0 kW
weight of the machine ca. 14.750 kg.
Gw0fr0
dimensions of the machine ca. 6950 x 1800 x 1950 mm