Repacking system

Year of construction

2004

Condition

Used

Location

Freising

Show map

Machine data

Machine type:: Repacking system

Year of construction:: 2004

Condition:: used

Price & Location

Location:: Freising, Germany

Call

Details about the offer

Listing ID:: A21867313

Reference number:: 209737HG

Update:: 06.05.2026

Description

The repackaging system is used to unpack glass bottles from pallets containing full module boxes, repackage them into ‘open basket’ carrier boxes holding four bottles, and repack them into pin-partition crates with palettising. The system consists of the following individual machines: 1. Depalletising of full module crates / repalletising of empty module crates: Here, pallets containing full module crates are fed in and destacked, whilst empty crates are stacked and transported out. 2. Repackaging machine: Here, 20-unit module boxes are unpacked, 4-unit carrier cartons are unfolded and filled with bottles/packed. 3. Packing into pin-partition crates and palletising: Here, the 4-unit carrier cartons are packed into pin-partition crates, stacked onto pallets, and transported out of the system.
Additional title: Repackaging of full pallets containing modular crates into pallets containing pi
Capacity approx.: 200 crates/h
Formats: Bottle crate (400 x 300 mm) on Euro pallet (1200 x 800 mm)
Dodpfx Acey Nm Hvj Nscg
Running direction: right -> left
Operation / Control: on-site control unit / Siemens PLC
Position: free standing
Base construction: Square tube construction bolted to the floor
Features: depalletizing, unpacking, bottle transport, crate transport, carton unfolding, packer for the bottles in the cartons, packer for the cartons in the quill boxes, palletizing of the full crates, pallet infeed and outfeed, protective grilles, switch cabinets, control device
Layer patterns: 2x2 bottles/carton, 2x4 crate, 5 layers / palet

Seller

Registered since: 2016

306 listings online

Call

Send inquiry

Telephone & Fax

+49 8161 ... show

Fax:

These listings may also fit your interest.

Auction

CNC turning and milling center Gildemeister CTX 510

Nordrhein-Westfalen

849 km

CNC turning and milling center
GildemeisterCTX 510

€14,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Dodpfoy Hg S Hjx Ac Nscg Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Drive power: 33 kW

See details

Auction

Vertical machining center POSMill C 800 Kompakt

Baden-Württemberg

1,218 km

Vertical machining center
POSMillC 800 Kompakt

€24,000

To the auction

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Dodpsy E Hqtjfx Ac Nscg Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24-position Table size: 950 x 520 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Program run time: approx. 5,700 h Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer.

See details

Auction

Hydraulic press for rubber and EVA foams MAPELLI T 1000

Greece

2,532 km

Hydraulic press for rubber and EVA foams
MAPELLIT 1000

€9,000

To the auction

Condition: ready for operation (used), Year of construction: 1983, operating hours: 50,000 h, functionality: fully functional, operating pressure: 200 bar, overall weight: 33,000 kg, pressing force: 1,000 t, stroke length: 650 mm, travel speed (max.): 3,600 mm/min, TECHNICAL DETAILS Pressing force: 1,000 t Clamping force of the core plates: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of the movable plate: 650 mm Stroke of the mold holder plate (towards operator): 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Dcodpfey Hhqdox Ac Neg Opening dimension per opening: approx. 108 mm Specific pressure on plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump power: 9 kW Oil dynamic pump power: 11 kW Installed electrical power: 21.5 kW Hydraulic oil capacity: approx. 160 l Operating Fluids Amount of hydraulic fluid emulsified with water and 5% CIL-SOLIOIL-BK oil: approx. 1,300 l Nitrogen bottles (each 60 l at 200 atm) for accumulator pre-charging: approx. 10 MACHINE DETAILS Weights Weight of the press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Total delivery weight: 35.5 t FEATURES Heating system with saturated steam Electrohydraulic power control device Electrovalve air venting system

See details

Auction

CNC turning and milling center MORI SEIKI NT 4200/1000S

Schleswig-Holstein

914 km

CNC turning and milling center
MORI SEIKINT 4200/1000S

€30,000

To the auction

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle Dedoy Eydyopfx Ac Nscg 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

See details

Auction

Multi-component injection moulding machines ENGEL VICTORY 1350H500V/220 Combi

Wien

1,572 km

Multi-component injection moulding machines
ENGELVICTORY 1350H500V/220 Combi

€12,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 220 t Screw diameter: 55 mm + 40 mm Dcodjy Exdxjpfx Ac Nsg Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

See details

Auction

Multi-material injection molding machine KraussMaffei KM200-1000-390 CZ

Wien

1,572 km

Multi-material injection molding machine
KraussMaffeiKM200-1000-390 CZ

€6,900

To the auction

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 200 t Tie bar spacing: 560 x 560 mm Screw diameter (first component): 60 mm Screw diameter (second component): 35 mm Shot weight (first component): 566 g Shot weight (second component): 178 g Dcodey Exdlopfx Ac Nog EQUIPMENT Two-component system Kraussmaffei Multinject system Note: When purchasing multiple items from the same location (see listings below), the lower costs for dismantling and loading will be waived.

See details

Auction

Multi-material injection molding machine ENGEL ES 330H80V/125 HL .2F

Wien

1,572 km

Multi-material injection molding machine
ENGELES 330H80V/125 HL .2F

€6,500

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Vertical cylinder: 18 MACHINE DETAILS Control: CC100 EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP Dsdpfx Acey Exc Is Necg 16x heating zones (HK) 2x magnetic clamping plates for BAP and FAP Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

See details

Auction

Multi-material injection molding machine ENGEL ES 650W500V/200HL. 2F

Wien

1,572 km

Multi-material injection molding machine
ENGELES 650W500V/200HL. 2F

€7,900

To the auction

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, screw diameter: 45 mm, clamping force: 2,000 kN, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nClamping unit: 2,000 kN\n\nScrew diameter unit 1: 45 mm\nScrew diameter unit 2: 45 mm\n\nMax. shot volume unit 1: 226 cm³\nMax. shot volume unit 2: 183 cm³\n\nMACHINE DETAILS\n\nMinimum mould installation size: 250 mm\nMaximum mould installation size: 750 mm\n\nEQUIPMENT\n2-component machine\nTie-bar-less design\n\nNote: When purchasing multiple items from the same location (see offers below), you will benefit from the most favourable disassembly and loading costs for each item. Dsdpfx Acey Exatj Nocg

See details

Auction

Injection molding machine ENGEL Victory 330/125 Tech

Wien

1,572 km

Injection molding machine
ENGELVictory 330/125 Tech

€9,300

To the auction

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,225 kN, screw diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dedpfx Aey Exagsc Nocg Clamping force: 125 t Screw diameter: 30 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

See details

Auction

Injection molding machine ENGEL ES 1800/300HL-V

Wien

1,572 km

Injection molding machine
ENGELES 1800/300HL-V

€14,000

To the auction

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, No minimum price – guaranteed sale to the highest bidder! Engel injection moulding machine including robot! TECHNICAL DETAILS Clamping force: 300 tons Screw diameter: 70 mm Max. shot volume: 1,039 cm³ EQUIPMENT 3x core pulls Dcodpfx Acsy Ew U Ae Nsg Robot Note: When purchasing multiple items from the same location (see offers below), the respective lower costs for dismantling and loading will be waived.

See details

Advertise here