Milling mach.-univ.conv. 700-999mm x-tr. for sale
Identified location: (PT) (Edit)
|
5
Lonate Pozzolo, Italy
dealership location
1657 km
1996
ready for operation (used)
Serial number: 7496 Working table size : 1000x520 mm Longitudinal travel X axis : 1500 mm 2rjdum Cross travel Y axis : 600 mm Vertical travel Z axis : 600 mm Spindle taper : 40 ISO Spindle speed : 0 - 4500 rpm Number of spindle speeds : 2 Spindle motor power : 9 Kw Working feed X-Y-Z axes : 0 - 11.000 mm/1' Rapid feed X-Y-Z axes : 11.000 mm/1' CNC : SELCA 3045P Approx Net Weight : 7.000 Kg Note : Continuos table 360.000 positions, vertical head +/- 90° more
|
|
13
- In operation until the beginning of September 2019! - Tax due to restructuring of the production hall 2rjv3y - Available: immediately - Visits by appointment possible - x/y/z-axis: 700/450/500 mm - Tool holder: ISO 40, hydromechanical tool clamping - Screen path control CNC 432 - further technical data see below on the photo of the machine card or on request more
|
|
9
Traverse paths: x = 700 mm longitudinal y = vertical 450 mm z = 450 mm Power: 4 kW (main motor) Speed range: 32-1600 U/min./18 levels Tool holder: ISA 40/M16 Quill stroke, vertical: 125 mm Cfr3oyz Facilities: -Vertical milling head universal table 1050 x 627 mm with round table Setup div. Wzg.-recordings Machine light HEIDENHAIN digital measuring device, 3 axes Documentation more
|
|
5
x-travel:900 mm y-travel:600 mm z-travel:600 mm table clamping surface::1.000 x 700 mm control:HEIDENHAIN TNC 415 turning speeds:20 - 3150 1/min tool taper:SK 40 spindle:11 kW max. torque on the spindle:600 Nm total power requirement:30 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:3,5 x 3,5 x 2,7 m CNC universal bed milling machine, head is swivelling manually horizontal / vertical head is swivelling manually on the 4 th axis Ikdwnn2l8 approx. 21.000 hours "machine on"... more
|
|
5
x-travel 710 mm y-travel 600 mm z-travel 500 mm control DIALOG 4 spindle taper SK 40 spindle turning speed range 0 - 6300 U/min table-size 1.000 x 550 mm table load 600 kg Beolsdx8rd feeds -stepless- 2 - 3600 mm/min rapid traverse 6,0 m/min power capacity 9,5 kW quill stroke 80 mm coolant voltage 380 V total power requirement 20 kVA weight of the machine ca. 4,4 t dimensions of the machine ca. 1,90 x 4,00 x 2,30 m coolant tank 1,80 x 0,80 x 0,20 m electric cabinet 1,65 x 0,80 x 1,25 m Ma... more
|
|
5
Head swivel: +/- 90° Travel (x/y/z): 900 / 220 / 350 mm Bfjbzwq79o Speed range: (12) 63 - 2,000 rpm Extension: 325 mm Table size: 300 x 1,200 mm Engine power: 4 kW Weight approx.: 1,400 kg Facilities - Coolant device - 3-axis digital device Heidenhain - Drill pinole - collet lining - Machine vice - Milling tools Art. more
|
|
6
x-travel 850 mm y-travel 250 mm 9lr7g09m z-travel 300 mm turning speeds 45 - 2240 U/min table surface area 1.370 x 300 mm spindle taper 40 SK total power requirement 5,5 kW more
|
|
6
Erftstadt, Germany
1834 km
2004
good (used)
Workspace: Travel X-axis 800 mm Travel Y-axis 390 mm Travel Z-axis 380 mm Table clamping area 1370 x 250 mm Table load capacity (max.) 350 kg Feed: Pinole feeds (3) 0.04; 0,08; 0.15 mm/U Vertical milling head Speed range, infinitely variable 70 - 3600 min-1 Spindle holder ISO 40 Pinole stroke 127 mm Drive power Engine power main drive 3.75 kW Bfhovrzxl3 Supply voltage 400 V Dimensions and weights: Dimensions( L x W x H ) 2000 x 1800 x 2300 mm Weight 1600 kg Addition: Coo... more
|
|
5
Wiener Neudorf, Austria
dealership location
2293 km
1991
ready for operation (used)
Workspace 785 x 250 x 410 mm Ehd2937 Table 1120 x 250 mm Delivery promptly, subject to prior sale Table: 1,120 x 250 mm Work area: 785 x 250 x 410 mm Recording: ISO 40 Speed: 40-2,000 rpm (18) Motor: 4 kW Feed motor: 1,5 kW Throat depth: 280 mm maximum distance table-spindle axis: 440 mm Length: 1,750 mm Width: 2.610 mm Height: 1,650 mm Weight: 2.000 kg Incl. 3-axis display RSF model Z530 for X, Y, Z AchseVorschübe for X, Y, Z axes with EilgängenTisch 45° re/li drehbarHorizontalf... more
|
|
3
X 762 mm- Y 305 mm- B37hgb3 R8 spindle Vertical travel of the table: 406 mm- Table 1070 x 230 mm- Speed: 3750 RPM Mitt Zübehor more
|
|
|
|
5
Herentals, Belgium
1766 km
2000
ready for operation (used)
- +-30 toolholders SK30 (weldon, spantang, opsteekdoorn, morse cone,…) - Digital reading X,Y en Z-axis - Range in X-axis: 800mm Nolxl - Range in Y-axis: 300mm - Range in Z-axis: 400mm - No manual included any more - Still in use more
|
|
5
Wiefelstede, Germany
dealership location
2086 km
used
Model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Milling machine head swiveling / rotating Giv8zqz -Tensioning table 280 x 1300 mm -Travel X / Y / Z 450/300/325 mm -Spindle mount SK40 -Pinolenhub -inolenvorschub 0.04-0.16 mm / u -speeds from 60 to 3000 U / min -dimensions 1700/1530 / H2200 mm -weight 1362 kg more
|
|
5
x-travel 600 mm y-travel 340 mm z-travel 340 mm quill stroke 127 mm spindle taper ISO SK Cihjlrll turning speeds 80 - 5400 U/min table: 1060 x 230 mm total power requirement 2,2 kW weight of the machine ca. 1,1 t more
|
|
2
Universal milling machine Manufacturer: Tiger Type: FU 90 Year built: unknown Table clamping area: 1100 x 270 mm Dimensions of the 3 T-slots: 14 mm Table swivel in both directions: 45° Automatic table longitudinal movement: 810 mm Automatic transverse movement: 250 mm Automatic vertical movement: 450 mm Milling spindle Spindle outer diameter: 88.89 mm Largest distance from working spindle to the bottom edge top slide: 140 mm 12 Spindle speeds Spindle speed range: 24-1550 rpm.... more
|
|
5
Wiener Neudorf, Austria
dealership location
2293 km
ready for operation (used)
Work area 900 x 300 x 575 mm Table 1200 x 300 mm Delivery promptly, subject to prior sale Table: 1200 x 300 mm Work area: 900 x 300 x 575 mm Recording: ISO 40 Speed: 32-1,500 rpm (18) Autom. Feeds: 16-780 mm / min (18) Engine: 4.5 kW Length: 2,600 mm Width: 2200 mm Height: 1,900 mm Weight: 2,500 kg Dkv9d8e9 3-axis Digital ACU-Riteautom. Feeds + rapid traverse x, z axis and DrehmomentbegrenzerVertikalkopf ausschwenkbarHorizontalfräsen with GegenlagerKühlmitteleinrichtungZentralschmi... more
|
|
15
Bridgebort milling machine SK50 recording and central lubrication Head 2 times pivotable Travel: 350x450x750mm Table: 350x1400mm Width: 180cm Height: 180cm Depth: 220cm with multiple tool holder with three-axis digital display Heidenhain Feed in all three axes Good condition fully functional can be visited on site and tried out. Shipping also abroad. Visit: Vsrz8q Basically, I would like to point out to you that, in order to avoid misunderstandings, the article can be visi... more
|
|
3
. X trail approx. 720 mm Y way approx. 300 mm Z-way approx. 400 mm . 8 speeds of 67-2300 RPM 12 feed 12-190 mm / min . 3 Quill feeds about 0.038, 0.075, 0.15 mm / U B2owpqeq Quill stroke 120 mm . WxDxH approx. 1.6 x 1.5 m x 2 m Weight approx. 1.3 to . Another according to offer more
|
|
9
Milling machines / Universal milling machines 3ydt9shm Brand: Bridgeport Type: Series I 2 HP Used machine Table length: 1.070 mm Table width: 230 mm X: 700 mm Y: 300 mm Z: 450 mm Incl. automatic feed on the drill pinole Incl. 3-axis digital readout Variably adjustable speed Machine nr.: F497 more
|
|
4
Universal milling machine Clamping range: x=1250 mm, Y=340 mm Bfk93uaclz incl. a lot of accessories Price on request more
|
|
0
x-travel: 720 mm y-travel: 350 mm z-travel: 400 mm B-axis (table): mm clamping surface area: 1300x300 mm Nn3oj range of revolution per miute: [...] U/min tool taper: ISO 40 Tool changer: milling head swivable : +/- 90 ° operating hours: h total power requirement: kW weight of the machine ca.: 1,5 t dimension machine [...]: 1,8 x 1,6 x 2,4 m more
|
|
5
Wiener Neudorf, Austria
dealership location
2293 km
2004
ready for operation (used)
Work area 700/500/500 mm Table 900 x 500 mm Ptuqi3 Delivery promptly, subject to prior sale Table: 900 x 500 mm Working range: 700/500/500 mm Spindle speeds: 63-3.150 (18) RPM Quill stroke: 100 mm Solid angle table: 900 x 500 mm Angle table load: 500 kg Power: 6.6 kW Length: 2,115 mm Width: 2,220 mm Height: 2,120 mm Weight: 2.550 kg CNC controller HEIDENHAIN TNC 41018. mech. Feeds with rapid traverse in X, Y, Z AchseWerkzeugmachergenauigkeit DIN 8615Hydr. Tool clamping with record... more
|
|
5
Year of production: 1989 Specifications: Table clamping surface: 290 x 1250 mm X-axis travel: 800 mm Travel Y-axis: 370 mm Z-axis travel: 450 m Main motor power: 1.8 kW 2o8cbjzh Ground plan of the machine: 2648 x 1982 mm Weight: 1760 kg In good technical condition. Fully functional. Vise and holder included. more
|
|
9
De Boelakkers 15, Heeze Eindhoven, NL
1817 km
2000
good condition (used)
ABENE VHF 300 universal milling machine in excelent like new condition. Machine Nr.7089. Year of contruction 2000 with CE conformation. Specifications: - Machine speed: 55 - 2500 rpm - Power feed X/Y/Z infinitely variable 0 / 3000 mm/min - Rapid feed X/Y/Z 3000/3000/1200mm/min - Travel X / Y / Z: 715/275/500 mm - Table working area 1200x320 - Spindle brake - Spindle nose SK40 DIN 2080 Bbo2id89n0 - Weight about 1600 Kg Accessories and equipment: - 3-axis digit... more
|
|
11
Soerendonk, Netherlands
1810 km
good (used)
WMW Heckert milling machine offered. Type: FU 250x1000/2 X-travel; 820 mm Y-travel: 270 mm Z-travel: 470 mm Table: 335 x 1240 mm Speed: 56-2800 RPM Power: 6,5 KW Table turnable Head turnable 90 degrees Bb8dwxj3 Included tools Dimensions: 200x165x190 cm (LxWxH) For more information call us or send an e-mail. more
|
|
6
Conventional, used universal milling machine WILHELM GRUPP UF 20, year of construction 1978. The machine have a very well condition and brings along a plenty selection of equipment/ accessories. 2mw0yjfy more
|
|
7
x-travel 870 mm y-travel 300 mm z-travel 450 mm spindle taper SK 50 spindle turning speed range 35 - 1500 U/min feeds 10 - 510 mm/min Pbxl373n table-size 320 x 1450 mm drive milling spindle 5,5 kW total power requirement 7,7 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,2 x 2 x 2,2 m Electric 380 Volt Univ. milling head system HURON 3-axis digital readout Fagor with autom. feeds and rapid travels in all working directions Machine dealer with own stock of 2500 m². more
|
|
1
Wiener Neudorf, Austria
dealership location
2293 km
ready for operation (used)
Work area 950 x 275 x 500 mm Table 1300 x 300 mm Delivery promptly, subject to prior sale Table: 1.300 x 300 mm Work area: 950 x 275 x 500 mm Recording: ISO 40 Speed: 30-1,200 RPM. Motor: 3.0 kW Length: 1,600 mm Width: 1800 mm Height: 1,600 mm Weight: 1.750 kg With vertical head ausschwenkbar12 autom. Feeds not the current regulations of the equipment corresponds to in x, y, z AchseEilgänge in all 3 AchsenKühlmitteleinrichtungBetriebsanleitung in GERMAN (without counter bearing for h... more
|
|
1
Digital display 3-axis Table clamping area 1000 x 440 mm Crosspath X 800 mm Longitudinal path Y 300 mm Vertical path Z 400 mm Speed 40 - 2000 rpm Tool holder SK 40 Feed range 0 - 500 mm/min Engine power 2.2 kW Machine No. 3536 Nn7v9 more
|
|
5
Wiefelstede, Germany
dealership location
2086 km
used
Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Table 300 x 700 mm -Travel X / Y / Z 500/285 / H430 mm -Spindle mount SK40 -Speeds from 40 to 2000 1 / min -Feed 8-400 mm / min -Speed 600 mm / min -Cooling medium device Njrc7 -Shot head -High-speed head max 10,000 rpm -against stock -Dividers head -Dimensions 1340/1100 / H1550 -Weight 1716 kg more
|
|
5
1 used universal milling machine Fabr. Huron Type J 2 Masch. No. 50015 Series 740-579 Procedures: X - axle 750 mm Y - axis 500 mm Z - axis 450 mm Spindle speeds 30-1680 RPM Spindle taper ISO 40 Fp3tgyguo Table size 1050 x 350 mm Operating voltage 380 V 4.0/4.6 kW Weight 2T Dimensions Width: 1.75 m Depth: 2.00 m Height: 1.60 m Accessories and equipment -Digital display -automatic feed in all 3 axes -Rapid traverse in all 3 axes -HURON vertical milling head -Cooling ... more
|
|
1
Gêbr. Universal console milling machine Fabr. WANDERER Works Type KFEV1 TECHNISCHE DATEN Size of table surface 1550 x 315 mm Distance between water drains 1000 mm Trajectories automatisch/v Hand X, Y, Z 730 (750) x 240 (260) x 400 (420) Path of Pinole 80 mm Tool recording vertically/horizontally ISO40 Diameter of the milling spindle 70 mm Spindle speed vertical/horizontal 45-2000 U/min Subfront X, Y-axis 16-710 mm/min Subfront Z-Axis 8-355 mm/min Rush X/Y/Z-Axis 4000/2000/100... more
|
|
4
x-travel 870 mm y-travel 300 mm z-travel 450 mm table surface area 1450 x 315 mm spindle taper SK 50 spindle turning speed range 35 - 1500 U/min feeds 5 - 510 mm/min spindle drive 5,5 kW total power requirement 7,7 kW Inhrxbx weight of the machine ca. t Accessories: vertical head swivelling in 2 planes, hydr. vice, counter bearing, various tool fixtures, various milling tools, tool cabinet more
|
|
0
table mounting size: 310 x 1400 mm table movement x: ca. 900 mm table movement y: ca. 300 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min Bfemtcligz electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg more
|
|
4
Dear ladies and gentlemen! Below we offer subject to change: Make: Reckermann naming: U. à ¢ â ' ¬â €œ milling machine Type: FU 1000 year: 1972 Technical data: Table size 1000 x 400 mm Jvfwojyny Travel 740 x 210 x 400 mm Mount MT 4 Speed max. 2800 U / min (other specifications on request) Please let us know whether you are still interested in the acquisition of such a machine. Should find other objects, or even sales plan, we also ask for your non-binding information. I... more
|
|
5
Wiefelstede, Germany
dealership location
2086 km
1987
used
Milling machine, universal milling machine, tool milling machine -Table 1600 x 400 mm Bagdkf8ycr Travel X / Y / Z 1100/400/400 mm -electric tool voltage Spindle mount SK50 -Pinolenhub 100 mm - Speeds from 28 to 1400 rpm -Kuhlmitteleinrichtung Dimensions 2100/2320 / H2700 mm -Weight 4000 kg more
|
|
9
UNIVERSAL MILLING MACHINE "SIXIS" S-103 spindle head ISO 30, standard fix table with 7 T-slots Manufacturing origin CH Custom position 8459.6930 TECHNICAL DATA Table travel Longitudinal by hand and automatic 450 or 300 mm 1 Handwheel turn 4 mm 1 division at nonius 2/100 mm Vertical by hand and automatic 400 mm 1 handwheel turn 2 mm 1 division at nonius 2/100 mm Automatic feeds Longitudinal = 8 possibilities 12-19-30-45-63-96-150-216 mm/min Vertical = possibilities 6-9... more
|
|
9
- Table size: 1250x350 mm - Travels X / Y / Z: 850 x 250 x 470 mm - Spindle mount: ISO40 - Spindle speeds: 45-2000 rpm. / à 24 steps - Horizontal and vertical spindle in the same milling head - Swiveling in the head: +/- 90 ° - Gear bar displaceable (Y axis) - digital display Heidenhain (3 axes) - Coolant pump - div. on accessories Bbsamlpd7f - Weight: about 2150 kg - Space required: approx. 1900 x 2000 x 1700 mm more
|
|
6
x-travel 790 mm y-travel 390 mm z-travel 350 mm table surface area 1270 x 254 mm spindle taper R 8 spindle turning speed range 60 - 4500 U/min feed of spindle 0,04 - 0,08 - 0,14 mm/U Kptv7t8e spindle drive 1,5 kW vertical head swivelling Rechts / Links 90 ° vertical head swivelling nach Vorne / Hinten 45 ° crossrail adjustment horizontal 530 mm 360 ° distance spindle nose and table 0 - 450 mm distance spindle - column 165 -690 mm total power requirement 2 kW weight of the machine ca. 1... more
|
|
6
Description Digital display Technical data: X path 700 mm Y-way 250 mm Z route 490 mm Spindle speeds 38-1510 U/Min. Recording ISO 40 Feed 6-1050 mm / min Rapid traverse rate 3500 mm / min 2o20jq Clamping surface 1100 x 305 mm Universal milling head swiveling 0 ° 270° Dimensions: 1930 x 1560 x 1720 mm Machine weight approx. 2100 kg more
|
|
4
x-travel 900 mm tool adaptor SK50 table size 1.300 x 380 mm Be70bcdkqi quill stroke weight of the machine ca. 1,6 t more
|
|
11
Table size 1250x350 mm Working travels 850x250x470 mm Yd0zjlx2 Spindle taper 40 Spindle speeds 45-2000 rpm With digital read-out Misc. accessories MARCELS MASCHINEN AG more
|
|
10
CNC TOOLS MILLING MACHINE "REIDEN" TYPE FU-100A Digital read-out Mitutoyo 3 axes Spindle ISO 40 X/Y/Z = 700/250/470 mm Table 1100x300 mm Wiqmhoiz 22-2000min-1 more
|
|
7
Langwedel, Germany
2119 km
1981
good (used)
Manufacturer TOS Model F3A-U Built approx. 1981 Masch.Nr. Technical data: Speeds 45-2000r/min in 12 stages Table load max. 250kg Table exterior size 300x1375mm Table longitudinal movement 900mm SK 40 Cross 235mm Vertical 360mm Table swivel 90°-45° right and left 13x Feed Rapids in all 3 axes Digital display 3 axes from Trak Uycvlkqj Longitudinal and transverse feed 14-900mm/min Vertical 4-250mm/min max distance between Spindle and table 425mm Watercooling Work light Mach... more
|
|
2
Technical details x-travel 0700 mm y-travel 340 mm z-travel 350 mm table-size 1000 x 400 mm tool taper SK 40 spindle turning speed range 32 - 2800 U/min quill stroke 120 mm I8k2am3z total power requirement 4,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,5 x 1,6 x 2 m Additional information Machine can work vertical or with tiltable head horizontal. more
|
|
5
Description Digital display (3 axis) Technical data: Clamping surface 1100 x 300 mm Longitudinal stroke 700 mm Kpx2z Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 milling feeds Longitudinal and transverse 18-800 mm / min. vertical 7.2-320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Weight of the machine CA. 2050 kg more
|
|
5
Control Heidenhain 6138 TNC x-travel 1.050 mm table size 1.300 x 400 mm Gi9umyc quill stroke weight of the machine ca. 3,5 t more
|
|
5
Table size 1100x300 mm Working travels 700x250x470 mm Spindle taper 40 F0mq2gwpu Spindle speeds 22-2000 rpm With DRO. Misc. accessories MARCELS MASCHINEN AG more
|
|
14
ISERLOHN, Germany
1919 km
1987
excellent (used)
Serial console milling machine. RECKMANN type: combined 900 pony BJ. 1987 with 3-axis digital display Fabr.Heidenhain, feed rates adjustable, with cooling rental tele device machines lighting complete documentation is machine in the very good State of the tool and mold making. Bdm0weltve Traverse paths: X 720 mm Y200mm Z350mm Adjustable upper beam vertical spindle. Clamping table: 1070mmX400mm Spindle support vertical and horizontal: ISO 40 Spindle speeds vertical and horizontal:... more
|
|
2
Trzebunia, Poland
2596 km
good condition (used)
Jvcmqm Table size: 1250 x 330mm Tool holder ISO40 Pathways: X - 820mm, Y - 190mm, Z - 410mm Max power consumption: 6,5 kW Speed range: 56 - 2800 rpm Feed range: 10 - 630 mm/min Weight: around 2000kg Machine size: 1700mm / 2500mm / 1900mm Machine in very good condition, may be seen and tested in our stock. more
|
|
5
Schwarzenfeld-Traunricht, Germany
2065 km
ready for operation (used)
Good Stanko universal milling machine with track control Dyhf2bl more
|
|
|
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Milling machines
Dealer for Milling machines
