Diesel Tank Tank conditioning filling station

Year of construction

2011

Condition

Ex-display machine

Location

Germany

Diesel Tank Tank conditioning filling station

Machine data

Machine type:: Diesel Tank Tank conditioning filling station

Machine number:: 10.000 Ltr

Year of construction:: 2011

Condition:: as good as new (ex-display)

Price & Location

Location:: D - Nordrhein-Westfalen

Call

Details about the offer

Listing ID:: A2421820

Update:: 19.05.2026

Description

Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act

Dear Sir or Madam,

We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications:

Nominal capacity: 10 cbm
Quantity: 1
Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted.
Color: Paint RAL... as per your request.
Material: Steel in steel, material S235JRG2
Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate.

Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm).

Monitoring space of the double wall with leak detection fluid.

Container dimensions:
Length: approx. 5,350 mm plus 600 mm for diesel pump
Ibjdpfxocl Sb Rs Ac Iob
Diameter: approx. 1,600 mm
Weight: approx. 2,000 kg

Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket.
- Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“)
- Suction pipe 1¼“
- Dipstick and dipstick closure – tank level indicator
- Vent pipe with cap 1 ½“
- Limit value sensor with type approval
- Leak detection device (optical) = LAS with leak detection fluid
- Access ladder for side mounting, supplied separately.

Tank approved for installation outside of earthquake/flood zones.

Diesel fuel dispenser with data recording
Type: HDM80eco LTE
Flow rate: 75 l/min
Cloud-based basic module free of charge
You can see who, when, where, and how much fuel was dispensed.
Fueling is done via tank key or PIN input.

Dispensing area/fueling station
Type: KAP system, galvanized
Area with ramps (mm): approx. 2,650 x 5,300
Area without ramps (mm): approx. 2,500 x 5,000
Pan height (mm): approx. 60
- Nationwide general building approval
- Approved for installation outdoors and in buildings
(For outdoor installation with folding cover and passing pipes)
- 2 collection basins, each with a volume of 150 liters.

=====

Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters.

Of course, you can also participate in the design of your tank system!

All our systems are thoroughly inspected and checked by selected employees at our company.
We also offer affordable delivery upon request.
You can inspect our systems at any time.
Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises.
Have we convinced you of our offer?
If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you.

Price/Shipping

The price for the fuel station applies ex works Warstein, unloaded.
Delivery can be offered at a low cost for an additional charge.
Delivery time: upon agreement.
You will receive an invoice with VAT shown.

In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them.

Sincerely,
from Warstein
Tank & Environmental Protection Wozniack

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2015

35 listings online

Call

Send inquiry

Telephone & Fax

+49 2902 ... show

Fax:

These listings may also fit your interest.

Auction

Vertical machining center DECKEL MAHO DMU 125 P hi-dyn

Nordrhein-Westfalen

820 km

Vertical machining center
DECKEL MAHODMU 125 P hi-dyn

€11,000

To the auction

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Iedpfx Aezxf Inoc Iebb Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter

See details

Listing

Shipping container CIMC 40 ft container 40 piedi

Romanore

1,524 km

Shipping container
CIMC 40 ft container40 piedi

€1,900

ONO plus VAT

Call

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 32,500 kg, empty load weight: 3,800 kg, total length: 12,200 mm, total width: 2,440 mm, total height: 2,600 mm, load capacity: 28,700 kg, door opening width: 2,280 mm, door opening height: 2,260 mm, inner dimension height: 2,350 mm, inner dimension length: 12,000 mm, inner dimension width: 2,330 mm, STANDARD 40 FEET CONTAINER CSC VALID MARCH 24 SEALING Iodpfx Ajrk Eqvsc Ijbb IN WORKING CONDITION 2 UNITS AVAILABLE

See details

Auction

Cylindrical grinding machine DVS Buderus U-Grind 800

Rheinland-Pfalz

1,047 km

Cylindrical grinding machine
DVS BuderusU-Grind 800

€90,000

To the auction

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Ijdszwm Akjpfx Ac Iobb Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

See details

Auction

Internal and face grinding machine VOUMARD 400 CNC U2 L10 T2

Rheinland-Pfalz

1,047 km

Internal and face grinding machine
VOUMARD400 CNC U2 L10 T2

€22,500

To the auction

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Ibodpfjzwmz Tex Ac Iob Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head, B-axis Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

See details

Listing

50,000 liter heating oil / oil tank diesel tank Wozniack 50.000 Liter Tank nach EN 12285-2 Norm

Warstein

897 km

50,000 liter heating oil / oil tank diesel tank
Wozniack50.000 Liter Tank nach EN 12285-2 Norm

Call

Condition: new, Year of construction: 2023, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Management Act Dear Sir or Madam, We offer a 50,000-liter double-walled storage tank for the storage of heating oil / diesel / HVO100. Color: RAL 7035 Material: Steel, grade S235JRG2 Documents: Manufacturer’s certificate / type plate according to EN 12285-2, Ü marking Tank suitable for above-ground installation outside earthquake / flood zones. Equipment/fittings: Manway 600 mm with manway cover, screws, and gasket 1.1 Equipment/fittings: Manway 500 mm with manway cover and gasket 1 -Filling pipe 2” with TW closure (filling cap) (from 20 m³ = 3”) -Suction pipe 1 ¼” -Dipstick and dipstick closure - Tank content indicator -Vent pipe with cap 1 ½” -Limit switch with type approval Iodpeh Ukupsfx Ac Iebb -Leak detection device (optical) = LAS with leak detection fluid -Access ladder with platform for side mounting, supplied separately Sincerely, from Warstein Tank- und Umweltschutz Wozniack Enkerbruch 2 59581 Warstein

See details

Auction

CNC lathe VDF Boehringer VDF 250 CM x 3000 mm

Rheinland-Pfalz

1,047 km

CNC lathe
VDF BoehringerVDF 250 CM x 3000 mm

€19,950

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes C-axis speed range: 0–20 rpm Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Iodpfx Aozwmztec Iebb Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

See details

Auction

Bevel gear generator Gleason Revacycle Nr. 726

Germany

1,078 km

Bevel gear generator
GleasonRevacycle Nr. 726

€2,800

To the auction

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, overall weight: 9,000 kg, TECHNICAL DETAILS Foot cone angle: 15–55° Pitch circle diameter: 152 mm Tooth height with 21° finishing milling cutter: max. 10.7 mm Tooth height: max. 14.8 mm Tooth width at the tooth root: max. 28 mm Milling cutter diameter: 200 mm Milling cutter diameter according to template: max. 0.21″ (?) Number of teeth range: 8–50 Indexing range: 8–50 mm (?) Machining speed: 49.7 m/min Milling cutter speed: 32.6–49.7 m/min Feed rate: 2–3.1 s/tooth Workpiece spindle Diameter of conical bore at the large end: 99 mm Clamping length: 304.8 mm Taper per foot: 15.4 mm Taper depth: 15.8 mm Countersink behind the taper: 57.2 × 77.9 mm Spindle bore diameter: 22.3 mm Ijdpfezwmy Njx Ac Iobb MACHINE DETAILS Power of main drive motor: 7.46 kW Speed of main drive motor at 60 Hz: 1,800 rpm Speed of main drive motor at 50 Hz: 1,500 rpm Speed of hydraulic motor at 60 Hz: 1,800 rpm Speed of hydraulic motor at 50 Hz: 1,500 rpm Speed of coolant pump at 60 Hz: 3,600 rpm Speed of coolant pump at 50 Hz: 3,000 rpm Speed of chip conveyor motor at 60 Hz: 1,800 rpm Speed of chip conveyor motor at 50 Hz: 1,500 rpm Dimensions & Weight Footprint: 3,200 × 2,210 mm Machine weight: approx. 9,000 kg

See details

Listing

100,000 liter storage tank tank system tank

Warstein

897 km

100,000 liter storage tank tank system tank

Call

Year of construction: 1996, condition: used, Tank & Environmental Protection Wozniack – Specialist Company in accordance with the Water Resources Act Dear Sir or Madam, We offer a 100,000-liter double-walled storage tank for diesel, complete with a new diesel dispenser including data recording. Nominal capacity: 100 cubic meters Quantity: 1 Used, but fully refurbished, meaning the tank has been cleaned, reconditioned, primed, and painted. Color: RAL color; however, you can specify your own color preferences at any time. The system is primed and will be painted. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate / test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent pipe Quantity: 1 filling pipe Quantity: 1 new limit switch Quantity: 1 new leak detection device with leak fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage container with feet/console Tank dimensions: Length approx. 15,750 mm Diameter approx. 2,900 mm Weight approx. 16,000 kg Storage: Above ground Of course, you can also customize your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer cost-effective delivery upon request. Inspection of our systems is possible at any time. We have a range of other tank systems for above-ground and underground storage in various sizes available for sale on our premises. All our tank systems can also be offered without a diesel pump. Special offer: Liquid fertilizer – AHL tank systems in sizes from 10,000 to 100,000 liters. Water tank, fire water tank – available. Price / Shipping The price for the tank system is valid ex works Warstein, unloaded. Delivery can be offered at a low cost for an additional fee. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company in accordance with the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein Ibedpfjc Nk A Ujx Ac Isb

See details

Auction

Germany

1,078 km

Gear hobbing machine
MIKRONA 35

€7,900

To the auction

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the basic machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is held between the workpiece spindle housing (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angular adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range, X-axis: 140 mm Travel range, Y-axis: 100 mm Travel range, Z-axis: 300 mm Tailstock travel, W-axis: 420 mm Swivel angle, end mill head, A-axis, left: 50° Swivel angle, end mill head, A-axis, right: 60° Largest module that can be milled with involute cutters according to DIN 8002: 4.5 mm Largest module that can be milled for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling spindle speed range, B-axis: 0–1,500 rpm Workpiece speed, C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Milling coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (face of milling spindle): 50–230 mm W-axis (face of tailstock spindle): 165–585 mm Feed rate, X-axis: 3,500 mm/min Feed rate, Z-axis: 3,500 mm/min Feed rate, Y-axis: 4,000 mm/min Ibsdpjzwmyiefx Ac Ijb Feed rate, W-axis: 5,500 mm/min Feed rate, V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Loading device A wide range of accessories

See details

Auction

Germany

1,078 km

Tool milling machine
HERMLEC 600 V

€5,150

To the auction

Condition: ready for operation (used), Year of construction: 1997, operating hours: 13,465 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 1,000 kg, controller model: Heidenhain iTNC 430, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 450 mm Travel range, Z-axis: 400 mm Table load: max. 1,000 kg Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain iTNC 430 Operating voltage: 400 V Control voltage: 24 V Machine weight: approx. 6,000 kg Operating hours: 48,690 h Spindle hours: 13,465 h EQUIPMENT Tool holders SK 40 Documentation Heidenhain programming manual Machine vise Clamping jaws Iodpfxozwmx So Ac Iobb

See details

Listing

Warstein

897 km

Diesel tank Diesel pump off value data

Call

Year of construction: 2004, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 20,000-liter double-walled storage tank for diesel fuel, complete with a new diesel fuel pump including data recording. Nominal capacity: 20 cubic meters Quantity: 1 Used, but completely overhauled, meaning the container has been cleaned, refurbished, primed, and painted. Color: RAL color; however, you can specify your own color preferences at any time. The system is primed and will be painted. Material: Steel in steel, material S235JRG2 Documentation: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent pipe Quantity: 1 fill pipe Quantity: 1 new limit switch Quantity: 1 new leak indicator with leak fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage container with feet/console Container dimensions: Length approx. 6,870 mm plus pump 500 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Storage: Above-ground HDMeco 80 system – new. Diesel fuel pump with tank data recording for 100 users Delivery rate: max. 77 l/min Ibedpfx Ascnkftsc Ijb PC software: Windows, also Windows 7, USB interface including USB stick 4 m delivery hose (optional extension available), automatic nozzle with type approval, electrical connection 230 V Required accessories included in the system price: HDMe-RS = 2 m return hose with connections (pressure relief for the pump) EH-115 = 1 1/4" check valve with pressure relief, including connections Corrugated pipe set: 1 1/4", consisting of: 240 mm corrugated pipe with cathodic protection, including seals and flange connection Optional accessories: Transponder tag for contactless user identification. Of course, you can also customize your fuel storage system! All our systems are extensively inspected and checked by selected employees in our company. We also offer cost-effective delivery on request. Inspection of our systems is possible at any time. We have a range of other fuel storage systems for above-ground and underground storage in various sizes available for sale on our premises. All our fuel storage systems can also be offered without a diesel pump. Special offer: Liquid fertilizer – AHL fuel storage systems in sizes from 10,000 to 100,000 liters. Water tank/fire water tank also available. Price/Shipping The price for the fuel station is ex-works Warstein, unloaded. Delivery can be offered at a surcharge. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing fuel storage systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

See details

Auction

Bevel gear generator HURTH-MODUL KF 250 B

Rheinland-Pfalz

1,047 km

Bevel gear generator
HURTH-MODULKF 250 B

€7,000

To the auction

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 570602, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, controller model: Siemens Sinumerik 840 C, swivel angle A-axis (min.): -170 °, swivel angle A-axis (max.): 170 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Ibjdpjzwmx Eofx Ac Iob Travel range, X-axis: 300 mm Travel range, Y-axis: 400 mm A-axis: -170° to +170° X-axis speed: 0.1–5,000 mm/s Y-axis speed: 0.1–5,000 mm/s Workpiece diameter with 1:10 reduction ratio: 300 mm Workpiece diameter with 1:1 reduction ratio: 212 mm Maximum number of teeth: 200 Minimum number of teeth: 6 MACHINE DETAILS Control system: Siemens Sinumerik 840 C Total power requirement: 38 kW Dimensions & Weight Space requirement: approx. 4,200 × 2,200 × 2,100 mm Machine weight: approx. 10,000 kg

See details

Auction

CNC turning and milling center Mori Seiki NL 2500 SY/700

Germany

1,148 km

CNC turning and milling center
Mori SeikiNL 2500 SY/700

€30,000

To the auction

Condition: used, Year of construction: 2005, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MORI SEIKI MSX-850, TECHNICAL DETAILS Turning diameter: max. 356 mm Standard turning diameter: 275 mm Turning length: max. 705 mm Travel in X-axis: 260 mm Travel in Y-axis: ±50 mm Total travel in Y-axis: approx. 100 mm Travel in Z-axis: approx. 795 mm Rapid traverse rate X/Y/Z: 30 m/min Tool stations: 12 Ibedpfezwgwzsx Ac Ijb MACHINE DETAILS Design: SY with Y-axis Control system: MORI SEIKI MSX-850 Bar feed magazine: LNS Quick Load Servo 2 Bar length: max. approx. 1,500–1,600 mm / 63″ EQUIPMENT Tailstock Driven tools Y-axis LNS Quick Load Servo 2 bar feed magazine

See details

Listing

Gussago

1,449 km

Chiron FZ18W
ChironFZ18W

Call

Auction

CNC turning and milling center Mori Seiki NL 2500 SY/1250

Baden-Württemberg

1,177 km

CNC turning and milling center
Mori SeikiNL 2500 SY/1250

€29,000

To the auction

Condition: used, Year of construction: 2006, turning length: 1,298 mm, turning diameter: 356 mm, spindle speed (max.): 4,000 rpm, controller model: MORI SEIKI MSX 850III / MAPPS III, center width: 1,250 mm, TECHNICAL DETAILS Maximum turning diameter: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swinging diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Maximum spindle speed: 4,000 rpm Spindle bore: approx. 80 mm Number of turrets: 1 Number of tool positions: 12 MACHINE DETAILS Ibjdpfx Aezwgqusc Isb Control system: MORI SEIKI MSX 850III / MAPPS III Dimensions & Weight Dimensions (L x W x H): 5,000 × 2,300 × 2,400 mm Machine weight: 7,600 kg EQUIPMENT IRCO SIMAG loader magazine Chip conveyor Powered tools C-axis Y-axis

See details

Advertise here