Grapple

VH-BM Sorteergrijper - Sorting grab

Condition: new, Year of construction: 2023, _____Bale dimensions 1.20 x 1.00 - 1.50 mMax. bale weight 1,100 kgTotal length: 4.55 metersTotal height: 2.51 metersLoading system: Side loading arm with clamping deviceWrapping table: 4 beltsBale guide rollers on the wrapping table: 2 x adjustable Film end sensor, wrapping process stops when the film runs out or breaksVT 30 terminalFully automatic film cutter1 EW and 1 pressureless return or 1 DWSpecial equipmentMagazine for 4 film rolls,Storage location:null Crjdpfoki Einsx Al Njc

Condition: used, power: 102 kW (138.68 HP), fuel type: diesel, Year of construction: 2019, operating hours: 3,035 h, Drive: Wheel Empty weight: 15.050 kg Serial number: N016 Rental currency: EUR Please contact KEY-TEC Sales for more information Csdpjxgz Utofx Al Njrc

Condition: used, Year of construction: 2010, functionality: limited functionality, total width: 5,840 mm, total length: 15,700 mm, Offered here is a combination cold and deep-freeze room manufactured by Dresdner Kühlanlagenbau. Included in the scope of supply are the refrigeration units as well as the electrical equipment (lighting, control cabinet, etc.). Please note that the pallet racks shown in the pictures are not included in the sale. Crsdpfx Aotn U Rpsl Noc Unfortunately, the refrigeration unit for the deep-freeze compartment is defective. Please be aware that we are unable to carry out or arrange any repairs ourselves. Size of cold room (anteroom): 5.60m x 2.75m = 15.4 m² Size of deep-freeze room: 5.60m x 12.59m = 70.5 m² Clear internal height: 3.50m Insulation thickness: 120 mm Further dimensions and technical details can be found in the attached PDF document. The unit is not dismantled and can be inspected on site at the production location in Thuringia by appointment. Dismantling and transport are not included in the price and must be organized by the buyer. However, assistance with dismantling and loading by forklift can be provided.

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation Codpfsd Nwk Ujx Al Nerc For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Crodpfxjv Amw Ne Al Njc Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet Csdpfetvau Asx Al Nsrc The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: L23001388, overall weight: 208 kg, tank capacity: 14 l, type of cooling: water, input voltage: 380 V, Semi-industrial machine designed for mixing dough and extruding pasta from any type of pasta flour and semolina. The machine is dedicated to producing short pasta, long pasta, and dough strips. Suitable for medium-scale pasta production as well as feeding dough strips to cutters or nest-shaping machines. All parts in contact with dough, as well as the entire structure, are made of stainless steel. The mixers and screw are easily removable for cleaning. Equipped with an automatic cutter with a full set of knives. Additionally, I am offering a new set for penne pasta production for sale (2200 euro). Csdjw Av Snopfx Al Njrc

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, Type: KQ 14/38-2.5 Screening area: 1,400 x 3,800 mm without screen panels Codstgpf Hjpfx Al Nerc including 15 kW electric motor with new semi-mobile steel construction and new discharge chutes

Condition: used, Year of construction: 1997, Suitable for automatic grinding of the tooth geometry on chip and flank faces (front and back) of HM - tipped circular saw blades. All common tooth shapes can be finish-ground in one cycle (also trapezoidal flat tooth). Accessories: Total enclosure, Motorized chip and clearance angle adjustment Manual central lubrication Coolant grinding system, 1 arbor, Csdeyv Hq Uopfx Al Njrc 2 magnetic sawblade holders, 4 centering sleeves, 1 grinding wheel holder. Circular saw blade diameter: 80-810mm Circular Saw Bore Diameter: from 10 mm blade thickness: up to 5 mm Tooth pitch: 7-100mm rake angle: - 20° to +40° clearance angle: 6° to 45° tooth height difference: any Bevel cut on the back of the tooth: up to 45 ° Working speed: up to 20 teeth / min. Bevel cut on the tooth face: up to 15° grinding path max.: 20 mm Grinding wheel bore diameter: 32 mm Grinding wheel diameter: 125 mm Connected load: 1.6kW (400V / 50Hz) Weight approx.: 650 kg Dimensions W x D x H =: 1860 x 1010 x 1970 mm colour: turquoise RAL 5018 / gray RAL 7035

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors Crodpfx Alsxd T Hcj Noc - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon