Mini crane

Maeda MC 285 C WME-3

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: electric, next inspection (TÜV): 10/2025, Year of construction: 2020, operating hours: 900 h, Equipment: UVV, crane, low noise, rubber tracks, tip top condition! Bdsdpfxevriuvs Al Ash

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: SY008CE0693K8, Year of manufacture: 2024 Engine power: 73 hp (53.7 kW) Operating weight approx. 8,800 kg Yanmar engine, Stage V, approx. 73 hp, 202 Nm, 3,319 cc Load sensing hydraulics, max. 185 l/min 1st proportional auxiliary control circuit for GRL/hammer on joystick 1 2nd proportional auxiliary control circuit for grapple on joystick 2 Safety lift valves for stick and boom with overload indicator Bsdpfx Aljv Nix Ae Aedh Double-acting quick coupler hydraulic circuit Swing brake 2 travel speeds Cylinder protection on the boom Bucket breakout force ISO 56 kN Stick tear-out force ISO 38 kN ROPS cab Adjustable boom, dipper stick 2,050 mm Dozer blade Rubber tracks 450 mm Battery main switch Travel alarm and Rotating beacon Emergency engine stop switch 2 LED headlights on the roof 1 LED headlight on the boom 12V connection Document compartment Radio with speaker

Condition: used, Technical details: Bodpfou Nwxzjx Al Aedh power consumption: 2,3 kVA open-circuit voltage: 56 - 198 V protection class: IP 44 weight of the machine approx.: ca. 35 kg dimensions of the machine approx. HxWxD: 0,4x0,3x0,27 m equipment: - incl. earth cable and 3 pcs bolt taper for dia 2x 5mm and 1 x 6mm tested functional *

Condition: like new (used), functionality: fully functional, Year of construction: 2020, SmartLift SL 608 HL RT Outdoor, like new ! High Lifter, Rotation Head Bdsdpfx Ajzz Sq Ujl Ash

Condition: new, Year of construction: 2025, Mini Crane on a crawler chassis TB5000 JiB BEFARD TB 5000.JIB is an alternative to the basic version of TB 5000, thanks to the JIB arm it is more mobile and allows work in hard-to-reach places. TB 5000.JIB is equipped with an active arm, two hydraulic extensions of the main arm and two hydraulic extensions of the JIB. Bsdpfx Aljv I T T Ie Aodh Standard features: * radio control of the device - driving, working, spreading the feet * double power supply of the crane - combustion and electric 230 V * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm Additional, optional equipment: * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet Available in the selected color.

Condition: new, Year of construction: 2026, Assembly robot BEFARD XGR 800.3 Specification: * full remote control - both operation and drive of the device * three hydraulic extensions with a vertical range of 5.55 m * power supply by a combustion engine (optional additional power supply by a 230 V electric engine or Li-ion batteries) * possibility of simultaneous operation from the 230 V mains and battery charging (for the Li-ion version) * two-circuit vacuum system * maximum lifting capacity 800 kg * 8 vacuum suction cups * rotating frame with suction cups (hydraulically) - controlled by the remote control * lateral shift of the frame with suction cups (right, left 10 cm - hydraulically) * tilting frame with suction cups to the sides (relative to the device - manually or hydraulically) * tilting frame with suction cups (possibility of lifting the element from the horizontal plane and verticalizing it - hydraulically) * non-marking tracks * two working modes - fast and slow * color to choose from Optional additional equipment: * HS spacers * valves * frame tilt with suction cups (hydraulic - remote control) * forks * anti-overload system * hook * LED lamp Bdodpfx Aeibqr Tjl Ash * 230V wired power supply (for the combustion version). Other models available: XGR800.1 with one hydraulic extension, with a vertical reach of 3.9m XGR800.2 with two hydraulic extensions, with a vertical reach of 4.75m Gasoline engine - VANGUARD brand 10 HP / 5.5 KW

Condition: new, Year of construction: 2024, Handheld laser welder LWH-3000-N Relfar FWH20-S10A Bdjdpfxeup Uzxj Al Aeh The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Bdodpowkgq Rofx Al Ajh Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: new, overall weight: 2,500 kg, maximum load weight: 2,500 kg, lifting height: 14,000 mm, Year of construction: 2026, Equipment: hydraulics, BEFARD XM2500 ROTO – NEW TECHNICAL SPECIFICATIONS • Max. lifting capacity: 2,500 kg • Pick & Carry capacity: up to 2,500 kg • 4 hydraulic extensions of the main boom + 3 hydraulic extensions of the hydraulic jib • Hydraulic jib with lifting capacity of 790 kg • Boom lifting angle: 85° • Vertical reach: up to 14,85 m (with optional equipment) • Non-marking rubber tracks • Extendable crawler chassis: 890–1,610 mm • Full radio remote control for both crane operation and travel • Four operating modes • Continuous 360° slew (unlimited rotation) • Hydraulically extendable counterweight • Stabilizing blade (front and rear) • Overload protection system • Optional 990 kg winch • Fixed LED work lights + magnetic LED light AVAILABLE POWER OPTIONS 3-in-1 Version • Petrol engine • Electric motor (230 V / 400 V / 110 V) • Lithium-ion battery pack Petrol Version • Powered exclusively by a petrol engine Petrol + Electric Version • Petrol engine with electric motor (230 V / 400 V / 110 V) Li-Ion Battery Version • Powered exclusively by lithium-ion batteries OPTIONAL EQUIPMENT • 990 kg winch with 60 m steel rope (Ø 7 mm) • Hydraulic jib search hook with 6 working positions, extending the reach by 0.5 m • Custom RAL paint colour • Tow hitch for stabilizing blade • Fork attachment for stabilizing blade • Aluminium loading ramps Befard XM2500 ROTO – Pick & Carry Mini Crane with Unlimited Rotation Bjdpfszlxk Njx Al Aedh The Befard XM2500 ROTO is a modern crawler mini crane that combines a lifting capacity of up to 2,500 kg with compact dimensions and outstanding operating precision. Thanks to its continuous 360° rotation and identical lifting capacity in every slewing position, it provides maximum flexibility on the job site. The machine offers Pick & Carry capability up to 2,500 kg, a maximum lifting height of 14 m, and a horizontal reach of 11.6 m. It is equipped with 4 hydraulic boom extensions, a hydraulic jib with 3 extensions, a hydraulic counterweight, and an extendable crawler chassis (890–1,610 mm), ensuring excellent stability and versatility. The XM2500 ROTO is the ideal solution for installation, industrial, and construction applications—where power, reach, precision, and reliability are essential. • The advertised price applies to the basic petrol-powered version. • Built to order. • Net price.

Condition: good (used), color: grey, lifting height: 27,000 mm, Year of construction: 2017, operating hours: 1,849 h, Field of application: Construction Bedpfjk Aaafex Al Aedh CE mark: yes Technical condition: good Visual appearance: good Please contact Vink Machinery for more information Bocker AHK 27/1200 Easyline * 2017 * 1849 working hours * Petrol * 27 meters hook height * 20 meters horizontal range * 1200 kg lifting capacity * Wheel drive * Remote control * Incl. documents