Second-hand machinery for sale (200,000)

Condition: used, Year of construction: 2012, total length: 15,000 mm, total width: 12,000 mm, workpiece length (max.): 5,600 mm, workpiece width (max.): 1,250 mm, The machine originates from a business closure. Inspections under power are possible! TECHNICAL DETAILS Max. panel width: 1,250 mm Max. panel length: 5,600 mm Min. panel length: 500 mm Min. panel width: 300 mm Max. feed speed: 60 m/min MACHINE DETAILS Control system: SIMATIC PANEL Dimensions (L x W): 15,000 x 12,000 mm The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Gijdpfxey R Sirs Abmot External reference: 8465

Condition: used, Year of construction: 2007, workpiece height (max.): 60 mm, edge thickness (max.): 35 mm, feed rate X-axis: 40 m/min, controller model: POWER CONTROL PC22", The machine comes from a company closure. Inspections under power are possible! TECHNICAL DETAILS Number of working units: 11 Maximum feed speed: 40 m/min Maximum panel thickness: 60 mm Minimum panel height: 16 mm Minimum panel width: 85 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 35 mm Pressure system: Rubber belt Workpiece support guides NC-controlled positioning Panel infeed alignment system The machine is configured as follows: PRE-MILLING / MILLING UNITS Number of pre-milling / milling units: 2 Unit 1: Pre-milling unit Motor power: 4.5 kW Speed: 5,860 rpm Automatic, time-controlled engagement Unit 2: End trimming unit Motor power: 1.8 kW Automatic tool change GLUING AND EDGE FEEDING Number of edge rollers: 68 Number of pressure rollers: 14 (1 x 7 + 1 x 7) Lamps for pre-heating the panel edge Pre-melter for PUR adhesive Gluing system Adhesive pot for PUR glue NC-controlled positioning EDGE PROCESSING UNITS Number of edge processing units: 8 Unit 1: End trimming unit Number of motors: 2 Gsdpfey R R T Njx Abmsit Motor power: 0.22 kW Speed: 10,350 rpm NC-controlled positioning Unit 2: Top and bottom flush trimming unit Number of motors: 2 Motor power: 0.55 kW Speed: 11,400 rpm Unit 3: Corner rounding unit Number of motors: 2 Motor power: 0.4 kW Speed: 10,980 rpm Automatic tool change NC-controlled positioning Automatic, time-controlled engagement Unit 4: Scraper unit NC-controlled positioning Unit 5: Glue joint scraper unit Unit 6: Buffing unit Number of motors: 4 Motor power: 0.25 kW Speed: 1,390 rpm Automatic, time-controlled engagement Unit 7: Buffing unit Number of motors: 1 Motor power: 0.30 kW Speed: 3,000 rpm Unit 8: Buffing unit Number of motors: 2 Motor power: 0.18 kW Speed: 1,370 rpm MACHINE DETAILS Control system: WINDOWS XP Machine programming software: POWER CONTROL PC22 The machine is sold and delivered in its actual and legal condition (“as seen and agreed”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8453

Year of construction: 2007, condition: used, controller model: POWER CONTROL PC21, workpiece weight (max.): 100 kg, feed rate X-axis: 50 m/min, plate length: 1,200 mm, plate width: 5,600 mm, The machine comes from a business closure. Inspections under power are possible! TECHNICAL SPECIFICATIONS Max. panel width: 1,200 mm Max. panel length: 5,600 mm Min. panel length: 500 mm Godpfsy R R Tpox Abmsit Min. panel width: 250 mm Max. travel speed: 50 m/min Working capacity: 5 / 7 cycles/min Max. lifting capacity: 100 kg Individual output: 90 m³/h MACHINE DETAILS Control system: WINDOWS Machine programming software: POWER CONTROL PC21 Motion system: Suction cups Total connected load: 28 kW Storage length: 12,000 mm Storage width: 7,000 mm EQUIPMENT Automatic panel rotation system Vacuum pump The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial information of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and utilization of the machine at the destination. External reference: 8456

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, controller model: Siemens 840D, laser type: fiber laser, laser power: 2,000 W, sheet thickness (max.): 8 mm, overall weight: 20,000 kg, No reserve – guaranteed sale to the highest bidder! DURMA laser cutting system – fully equipped! TECHNICAL DETAILS Maximum sheet thickness: 8 mm Maximum steel sheet thickness: 8 mm Maximum stainless steel sheet thickness: 4 mm Maximum aluminum sheet thickness: 6 mm Maximum tube diameter: 170 mm Maximum tube length: 6,500 mm Maximum round tube diameter: 170 mm Maximum square profile: 120 x 120 mm Maximum rectangular tube: 150 x 100 mm Minimum tube diameter (automatic): 20 mm Minimum tube diameter (manual): 12 mm Minimum processable tube length: 185 mm Minimum processable wall thickness: 0.8 mm Maximum processable wall thickness (mild steel, 2 kW laser): 8 mm Maximum processable wall thickness (stainless steel, 2 kW laser): 4 mm Maximum processable wall thickness (AlMg3, 2 kW laser): 6 mm Repeatability: 0.05 mm Maximum profile length: 6,500 mm Minimum profile length for automatic loading: 3,000 mm Standard discharge length: 4,000 mm Maximum profile weight: 37.5 kg/m Maximum loading capacity: 3,000 kg Possible loadable profiles: round, square, rectangular, elliptical MACHINE DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser power: 2,000 W Power: 2 kW (2.72 HP) Control system model: Siemens 840D Automation level: Automatic Actuation type: Electric Dimensions & Weight Dimensions (L x W x H): approx. 16,000 x 7,400 x 2,364 mm Weight: approx. 20,000 kg EQUIPMENT CE marking Documentation/manual Cooling unit Emergency stop switch Fume extraction Safety light curtain Central lubrication system Precitec Autofocus Procutter cutting head F 150 (Focus) Control cabinet air conditioning Manual loading Manual unloading Laser positioning diode Central lubrication unit Small parts disposal box Illuminated cutting chamber IPG laser source 2 kW Vanterm compact filter unit Automatic loading system (6,500 mm) Unloading unit (6,000 mm) Discharge conveyor, inc. small parts conveyor (rear discharge) Automatic cut seam detection Automatic real-time measurement system for centering chuck Calcium carbonate dosing unit Gijdsy N Rqrepfx Abmjt

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 0-250-23-0021, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, feed rate X-axis: 138 m/min, feed rate Y-axis: 80 m/min, Submission of a bid obligates timely collection by 15.06.2026! Gsdpfx Aey Sad Hobmeit TECHNICAL DETAILS X-axis speed: 138 m/min Y-axis speed: 80 m/min Z-axis speed: 50 m/min Workpiece length: 300–2,500 mm Workpiece width: 100–1,000 mm Workpiece height: 4–80 mm MACHINE DETAILS Control system: power control PC 85 T Dimensions (L x W x H): 6,500 × 2,300 × 2,700 mm Electrics: 3 × 415 V / 50 Hz Power consumption: 19.5 kW Fuse: 50 A Pneumatics: min. 7 bar Air consumption: 2,500 NL/min Extraction connection: 2 × 280 mm Extraction capacity: min. 4,450 m³/h

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 60 mm, controller model: CNI N-Conex, spindle speed (max.): 24,000 rpm, The submission of a bid obligates the successful bidder to collect the item by 15.06.2026 at the latest! Gedpfx Abey Sadaomeit TECHNICAL DETAILS Maximum workpiece length: 2,800 mm Maximum workpiece width: 2,100 mm Maximum workpiece height: 60 mm Travel range X-axis: 2,800 mm Travel range Y-axis: 2,100 mm Travel range Z-axis: 250 mm Feed rate X-axis: 80 m/min Feed rate Y-axis: 80 m/min Feed rate Z-axis: 30 m/min Spindle motor power: 9,000 W Number of spindles: 10 Maximum spindle speed: 24,000 rpm Number of tool magazine positions: 12 MACHINE DETAILS Control system: CNI N-Conex Dimensions (L x W x H): 11,500 x 3,700 x 2,400 mm Vacuum pump: Becker 250 m³/h, 8 zones EQUIPMENT Automatic tool measurement Automatic lubrication system (Dropsa) Automatic labeling (barcode system) Lift & loading system Unloading system with conveyor belt Pressure rollers for multiple panel processing

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: R1011250, laser power: 4,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 170 mm, workpiece weight (max.): 890 kg, TECHNICAL DETAILS Gedpfxjy Rt Eze Abmoit Working Area and Cutting Area Nominal plate size X: 3,000 mm Nominal plate size Y: 1,500 mm Cutting area X-axis: 3,048 mm Cutting area Y-axis: 1,524 mm Cutting head Z-lift height: 170 mm Workpiece weight: max. 890 kg Dynamics and Accuracy Positioning deviation: ±0.1 mm Position repeatability: ±0.05 mm Edge detection accuracy: ±0.5 mm Positioning speed X-/Y-axis parallel: max. 80 m/min Positioning speed X-/Y-axis simultaneous: max. 113 m/min Axis acceleration: max. 4.5 m/s² Laser Source Laser power: 4,400 W Laser source: Bylaser 4400 Available laser sources: Bylaser 3000 / Bylaser 4400 / Bylaser 5200 ARC / Bylaser 6000 MACHINE DETAILS Dimensions and Space Requirements Standard height of transport system: 3,650 mm Transport system height to magazine: 4,350 mm Material cart length: 3,000 mm Additional length for extraction magnet: 200 mm Material cart width: 1,600 mm Material cart height without plate stack: 917 mm Standard lift height: 550 mm Lift height to magazine: 1,150 mm Lift height with stack tables: 800 mm Transport Data and Weights Drive unit with lifting unit: 1,300 kg Suction gripper frame with twin fork system: 1,200 kg PLC cabinet: 500 kg Material cart: 800 kg Total transport weight ByTrans 3015: 3,800 kg Equipment and Functions Vacuum gripper frame plate thickness loading: max. 25 mm Vacuum gripper frame plate weight loading: max. 900 kg Number of vacuum grippers: 42 Weight per gripper: max. 45 kg Compressed air: 6 bar Vacuum: -0.6 bar Twin fork system plate thickness unloading: max. 25 mm Twin fork system plate weight unloading: max. 900 kg Fork arm extension distance: 2 x 790 mm EQUIPMENT ByTrans 3015 Extended Bylaser 4400 Vacuum gripper frame Loading unit with suction gripper frame Twin fork system Material cart Vacuum pump Sheet separation Double sheet detection Cassette carriage Air conditioning Control cabinet with signal lamp and emergency stop Safety fence Photoelectric sensors ByTower storage system

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Godpfxoy N N Sus Abmeit Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Control system model: RMS6, version 3.18 Input voltage: 400 V Gjdpfx Ajy Nzuhjbmjit Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction system

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main Spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet Changer Number of pallets: 2 Godpoy R U Ecsfx Abmjit Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B-Axis Switching time 90°: 2.5 sec Pallet changeover time: 6.0 sec Tool Changer Number of tool positions: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent magazine slots free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS CNC control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Footprint approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling device High-pressure coolant system Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: Shaft for loading must be provided by the buyer.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning length: 380 mm, turning diameter: 450 mm, spindle bore: 59 mm, rotational speed (max.): 5,000 rpm, controller model: Seicos 40L Multi, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 450 mm Turning length: 380 mm Maximum machining diameter: 340 mm Travel X-axis: 215 mm Travel Z-axis: 400 mm Bar capacity: 51 mm Spindle speed range: 30 to 5,000 rpm Spindle drive power: 11 / 7.5 kW Spindle nose: A2-6 Spindle bore: 59 mm Bearing diameter: 100 mm Turret: 16 stations Feed rate: 0.001 to 500 mm/min Rapid traverse X/Z: 30 m/min Tool shank diameter: 25 x 25 mm Drill shank diameter: 40 mm Tailstock taper: MT 5 Tailstock quill stroke: 300 mm MACHINE DETAILS Control unit: Seicos 40L Multi Total power requirement: 23 kVA Dimensions & Weight Space requirement: approx. 5.5 x 2.8 x 2.2 m Machine weight: approx. 4.6 t EQUIPMENT Documentation Chip conveyor Tailstock Giodpfjy R Dmiex Abmet Signal light Parts discharge chute Tool setting arm Work area illumination Tool holder

Condition: repair required (used), functionality: limited functionality, machine/vehicle number: F20179V00607, Year of construction: 2019, operating hours: 7,419 h, load capacity: 2,000 kg, fork length: 1,000 mm, overall weight: 850 kg, total length: 2,333 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Fork length: 1,000 mm MACHINE DETAILS Dimensions & weight Total weight: 850 kg Dimensions (L x W x H): 2,333 x 720 x 1,305 mm Operating hours: 7,419 h EQUIPMENT Charger Gisdpfxjy Rrz Is Abmjt Operation manual Note: 5 battery cells are defective.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F20179V00633, Year of construction: 2019, operating hours: 8,386 h, load capacity: 2,000 kg, fork length: 1,000 mm, overall weight: 850 kg, total length: 2,333 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Fork length: 1,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,333 x 720 x 1,305 mm Giodpfx Abey Rry Remjt Total weight: 850 kg Operating hours: 8,386 h EQUIPMENT Charger Operator's manual

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Back gauge travel range: 0 - 370 mm Giodpfoy Rry Djx Abmet Stroke: 200 mm Distance between frames: 890 mm Support tables: 200 x 275 mm Throat depth: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing stroke: 8-10 mm/s Return: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 135414, measuring range X-axis: 4,200 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, controller model: C99, No reserve price – guaranteed sale to the highest bidder! The machine is currently not operational. There are defects on the Y-axis and Z-axis. Further details can be found in the attached service report and calibration certificate. TECHNICAL DETAILS Measuring range X: 4,200 mm Measuring range Y: 1,600 mm Measuring range Z: 2,100 mm Measuring table: 5,000 x 1,800 mm Calibrated measuring volume X-direction: 4,200 mm Y-direction: 1,600 mm Z-direction: 1,600 mm MACHINE DETAILS Gisdjy R Taxspfx Abmet Control unit: C99 EQUIPMENT Probe head: TP20 #5M2409 Measuring software: CMM-OS 5.4.00 CAA File: 03.06.2025 Calibration sphere: #134983 Note: The measuring computer HP Z420 Windows 7 can be supplied upon request. Please note this device has a virus infection caused by a hacker attack.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: F 36905, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 2,000 rpm, controller model: HEIDENHAIN TNC 360, The protocol of the geometric acceptance is attached! TECHNICAL DETAILS X-axis travel: 7,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm Rapid traverse x/y/z: 10 m/min Table size: 8,000 x 1,300 mm Table load capacity: max. 4 t/sq.m Universal head: 5x90 plus manual 1 Tool holder: SK 50 Milling spindle speed range: 20 - 2,000 rpm Drive power: 30 kW Spindle torque: 2-speed gearbox, 750 Nm MACHINE DETAILS Control system: HEIDENHAIN TNC 360 Giodpfxsy Rrbhe Abmjt Total power requirement: 50 kW Dimensions & Weight Installation space approx.: 9.0 x 3.8 x 4.6 m Machine weight approx.: 25 t EQUIPMENT Orthogonal milling head, water-cooled 3D wireless probe M&H 20.41 Partition wall for parallel operation/setup Internal air blast Internal coolant supply 15 bar Adapter for high-speed milling spindles with torque support Travelling operator platform Chip conveyor Electronic handwheel HR 410 Monitored safety fences Various optional accessories (angular milling heads, clamps, etc.)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Gisdpfx Ajy R Ur Ajbmst TECHNICAL DETAILS Travel X-axis: 1,300 mm Travel Y-axis: 600 mm Travel Z-axis: 700 mm Max. spindle speed: 12,000 rpm Taper: HSK 63 - A ICS (internal coolant supply): 20 bar Tool changer: 80 positions MACHINE DETAILS Control: Heidenhain iTNC 530 EQUIPMENT Electronic handwheel Paper band filter Fully enclosed work area Direct measuring systems Chip conveyor Bellows with steel lamellae 3D measuring probe Laser measuring system

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: PA158, turning length: 450 mm, turning diameter: 300 mm, workpiece weight (max.): 9 kg, workpiece length (max.): 150 mm, workpiece diameter (max.): 225 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 450 mm Turning diameter: 300 mm Max. workpiece diameter: 225 mm Max. workpiece length: 150 mm Max. workpiece weight: 9 kg MACHINE DETAILS Rated voltage: 380 V Number of phases: 3 Frequency: 50/60 Hz Maximum power consumption: 22.9 kVA Total current consumption: 34.8 A Maximum motor current: 72 A Short-circuit data / breaker capacity at: 15 kA Dimensions & weight Required space (L x W x H): approx. 2,550 x 2,150 x 2,100 mm Machine weight: approx. 4,900 kg Gjdoy R Uy Hopfx Abmjit Note: As other machines must be relocated for loading, the specified disassembly and loading costs apply.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1938, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, workpiece length (max.): 850 mm, workpiece diameter (max.): 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gjdpey R Uxisfx Abmsit Turning length: 250 mm Turning diameter: 340 mm Max. spindle speed: 4,500 rpm Max. workpiece diameter: 300 mm Max. workpiece length: 850 mm Workpiece clamping: Three-jaw chuck, Kitagawa B-210 MACHINE DETAILS Control: Okuma OSP 7000L Max. power: 22 kW Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Max. power consumption: 30.1 kVA Total current draw: 43.4 A Max. motor current: 106 A Circuit breaker at: 10 kA Note: As other machines need to be moved for loading, the stated dismantling and loading costs apply.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 70,119 h, machine/vehicle number: A0111A0021, controller model: TruControl 1000, laser source model: Festkörperlaser, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, Equipment: CE marking, safety light barrier, TECHNICAL DETAILS Working area: 2,500 x 1,270 mm Parts flap: 300 x 500 mm Clamping claws: 2 units Laser Solid-state laser: TruDisk 3001 LLK outlets: 1 unit Fiber optic cable: 10 m Cutting head Lens focal length: 200 mm MACHINE DETAILS Operating hours Laser on-time: 70,119 h Total operating hours: 73,936 h Control Laser control: TruControl 1000 Screen size: 15" EQUIPMENT Robust, easily accessible C-frame Precision linear guide system for high-accuracy processing Linear magazine including 2 clamping claws Maintenance-free drives Repositioning device with programmable hold-down Brush tables Good parts container Chip bin Enclosed beam guidance via fiber optic cable ContourLine FocusLine NitroLine Chiller unit Diode-pumped excitation for long service life Upgradeable for up to 3 additional LLK outlets Quick-change cutting head system ControlLine Electro-hydraulic punching head Programmable hold-down plate Tool length compensation Punch lubrication spray Gisdpfx Aboy R Uatomot Slug extraction system Open control based on Bosch PNC-P Control panel with TFT color display Teleservice via Internet Automatic shutdown USB port Network connection CE marking Multi-beam light barriers Laser source safety monitoring system Quick disconnect for hydraulics Scatter radiation protection Additional LLK outlet for operation with Trumpf system MultiTool function MultiBend function Thread forming function Marking / fast embossing function Roller and deburring technology function Softpunch function Adaptive stroke calibration Spray lubrication for die Additional clamping claw Individually opening clamping claws Height-adjustable clamping claws Automatic clamping claw closing Repositioning cylinder with height-adjustable pressure pieces Sensor for parts chute Loading/unloading aid for brush tables Vibration-damped foundation Chip conveyor with tilting bin Liftable brush segment Parts conveyor belt

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Giodpoy Rmdqefx Abmst Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Hurco Winmax, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Table width: 1,000 mm Gijdpjy R Rn Hofx Abmot Table length: 510 mm Max. spindle speed: 15,000 rpm Max. table load: 1,350 kg Number of tool changer positions: 24 MACHINE DETAILS Control model: Hurco Winmax Tool holder: SK 40 EQUIPMENT 4th CNC rotary axis Chip conveyor Coolant system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 11,360 h, machine/vehicle number: 1115000189 7, table length: 400 mm, table width: 300 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, table load: 50 kg, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis (focusing axis): 500 mm Rapid traverse X/Y/Z: 20 m/min Giodsy N N Ivjpfx Abmst Acceleration: 0.3 g Table size: 400 mm x 300 mm Table load capacity: max. 50 kg MACHINE DETAILS Laser type: Nd:YAG (lamp) / Nd:YVO4 (diode) Average laser power (lamp): 100 W Average laser power (diode): 15 W Laser spot diameter: approx. 0.03 mm Laser area: 60 mm x 60 mm Weight: 2,200 kg Voltage: 400 V Operating hours Cutting hours: 11,360 h Power-on hours: 45,628 h

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, total height: 1,500 mm, total length: 3,300 mm, total width: 870 mm, power: 22 kW (29.91 HP), TECHNICAL DETAILS Drum diameter: 340 mm Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg EQUIPMENT Temperature sensors on both drum bearings Gedpfx Abey Hiv Usmoit Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Further configuration details can be found in the attached document.

Condition: ready for operation (used), functionality: fully functional, outer diameter: 3,500 mm, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Giodpoy Hiuwefx Abmst Gross volume: 50 m³ Cylinder diameter: 3,500 mm Cylinder height: 5,000 mm Discharge diameter: 200 mm Roof shape: Conical 15° Cone-shaped floor, apex angle: 60° EQUIPMENT Lifting lugs Hinged manhole, 600 mm diameter with safety grid Mount for pressure/vacuum relief DN80 PN10 nozzle for filling line Nozzle with blind flange Nozzle for overflow Nozzle for level switch