Second-hand machinery for sale (200,000)

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Psdpfxjzdd Rgs Ag Tjgn Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing speed: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping system (top)

Condition: defective spare-parts repository (used), Year of construction: 2020, spindle speed (max.): 18,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 150 mm, table load: 20 kg, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was 39,875 EUR! TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 150 mm Dimensions of the T-slot table (L x W): 700 x 570 mm Maximum table load: 20 kg HFS spindle power: 80 W HFS spindle speed: 60,000 rpm Motion Rapid traverse: 100 mm/s Repeatability: 0.01 mm Tool holder: 6 mm MACHINE DETAILS Electrical connection: 240 V Software: Signumeric EQUIPMENT Bellows covers Energy guide chains Jäger engraving spindle 42-2 W27 FS incl. frequency converter Pjdpszddwmefx Ag Tsgn Reinforced base frame Heat dissipation via spindle carrier 2 m cable outlet Quick-change system for on-site electric engraver Documentation and software available Note: without monitor and without PCA control module (engraving computer)

Year of construction: 2018, condition: ready for operation (used), operating temperature: 950 °C, ambient temperature (max.): 70 °C, nominal flow rate: 40 m³/h, overpressure (max.): 0.2 bar, machine/vehicle number: 220173941, TECHNICAL DETAILS Maximum overpressure in the pipes: 0.2 bar Maximum operating temperature in the pipes: 950°C Maximum ambient temperature: 70°C Pgedpfx Aszddb Ejg Tjn Pipe volume: 40 l EQUIPMENT Dew point or cp control Soot filter in duplex version Fully automatic power control in the range of 50-100%

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665100, overall weight: 4,700 kg, center height: 125 mm, Round grinding machine with robot! TECHNICAL DETAILS Center height: 125 mm MACHINE DETAILS Pgodpfx Aezcwfueg Tjn Control: Fanuc 18i-T Total weight: 4,700 kg Operating hours Automatic cycle time (according to diagram): 41,411 h Feed time (according to diagram): 14,251 h EQUIPMENT Universal Robots UR5 robot Standard accessories 1 grinding wheel set, right-hand, 500 x 110 x 203.2 mm 1 manual swivel chuck for turning parts with manual indexing every 2.5 degrees Automatic balancing device MARPOSS type E 82 Hydraulic quill retraction for the tailstock Stroke monitoring for the tailstock Standard workpiece spindle MK 5 DIN 55026 size 5”

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 32.469.3143, center height: 125 mm, grinding length: 1,000 mm, The machine underwent a partial overhaul in 2009. TECHNICAL DETAILS Maximum height: 125 mm Maximum width: 1,000 mm EQUIPMENT Automatic working cycle Intermediate plates 50 mm for a maximum height of 175 mm Vibration-damping pads Machine light Internal grinding device for a maximum diameter of 70 mm Internal grinding spindle UJ7P Coolant supply through the workpiece spindle, including protective cover Side and angled dressing device Swiveling dressing device for internal grinding Dressing stop for internal grinding Collet chuck Set of collets Dial indicator stop for table swiveling with a 1/100 mm dial indicator Sine bar Psdpfx Aszcwfnog Togn Table fixed stop Strip-type filter system SONY digital measuring system, 2 axes Documentation

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, table load: 1,814 kg, spindle speed (max.): 8,100 rpm, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range, X-axis: 2,134 mm Travel range, Y-axis: 813 mm Travel range, Z-axis: 762 mm Max. spindle speed: 8,100 rpm Spindle motor power: 22.4 kW Max. torque: 122.0 Nm at 2,000 rpm Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg Number of tool magazine slots: 31 Distance from spindle nose to machine table (max.): 864 mm Distance from spindle nose to table (min.): 102 mm MACHINE DETAILS Control system: HAAS Pgsdpfx Agszg Drzo Tsn Table dimensions: 2,134 x 711 mm Max. load capacity on table: 1,814 kg EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 3,000 rpm, controller model: HEIDENHAIN iTNC530, The machine can be inspected while powered on during production! TECHNICAL DETAILS Travel range X-axis: 2,700 mm Travel range Y-axis: 1,000 mm Travel range Z-axis: 1,050 mm Psdpfjzg Dq Dex Ag Tjgn Max. feed rate X/Y/Z: 10,000 mm/min Table dimensions: 3,300 x 1,000 mm T-slots: 7 x 22 2-axis diagonal milling head: 1 x 2.5 Spindle speed: 60 - 3,000 rpm Motor power: 22/30 kW Tool holder: ISO 50 (DIN69872-B) MACHINE DETAILS Control system: HEIDENHAIN iTNC530 Coolant pressure through the spindle: 19 bar EQUIPMENT Adjustable control panel in front of the machine Enclosure with front-facing doors Machine documentation Cooling and chip disposal Chain conveyor in the longitudinal direction

Condition: ready for operation (used), Year of construction: 1998, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: J0124, travel distance X-axis: 1,800 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 426, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,800 mm Travel range Y-axis: 850 mm Travel range Z-axis: 750 mm Spindle nose to table distance range: 200 mm - 950 mm Spindle center to column distance: 920 mm Table dimensions X: 2,000 mm Table dimensions Y: 800 mm Max. table load: 2,200 kg Tool interface: SK50 Magazine capacity: 30 Spindle speed: 6,000 rpm Feed rate: 5 m/min Psdezdpqwopfx Ag Tjgn Rapid traverse: 12 m/min MACHINE DETAILS Control system: Heidenhain iTNC 426 Dimensions & Weight Dimensions (L x W x H): approx. 5,700 x 3,850 x 3,350 mm Weight: approx. 16,500 kg Operating Hours Total operating hours: approx. 51,000 h Spindle operating hours: approx. 26,000 h EQUIPMENT 4th axis installed as a rotary table Documentation/Manual Spindle speed infinitely adjustable Chip conveyor Coolant system Vices

Condition: ready for operation (used), Year of construction: 2012, controller model: NR4000.2.1 IPC, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Engraving area, X-axis: 100 mm Engraving area, Y-axis: 150 mm Pjdpfx Agszddzre Tjgn CNC engraving and embossing machine – TSM series Type: TSM 15-10-UG Year of manufacture: 2012 Control system type: NR4000.2.1 IPC EQUIPMENT Operating manual available Documentation and software available

Condition: ready for operation (used), functionality: fully functional, power: 30 kW (40.79 HP), filling opening length: 600 mm, filling opening width: 500 mm, rotor diameter: 400 mm, rotor width: 600 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been completely overhauled! Robust shredding mill with high performance! TECHNICAL DETAILS Pgjdpfxozdf Dne Ag Tjn Number of rotor blades: 5 Number of stator blades: 2 Rotor width: 600 mm Rotor diameter: 400 mm Infeed opening (W x L): 500 x 600 mm MACHINE DETAILS Drive power: 30 kW Suitable for: Plastics processing, recycling, and material recovery The screen size can be adjusted to customer requirements.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 12 kg, power: 45 kW (61.18 HP), controller model: SIEMENS Simatic, TECHNICAL DETAILS Drum diameter: 400 mm Maximum workpiece length: 700/1,000 mm Maximum individual workpiece weight: 12 kg Load capacity: 100 kg MACHINE DETAILS Control system: SIEMENS Simatic Installed power: 45 kW Psdpfx Agjzcl I Ds Tsgn Centrifugal wheels: 4 units Centrifugal wheel type: Hurricane H 28 Power per centrifugal wheel: 7.5 kW

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Pgsdpfxozb Iihs Ag Ten Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Pedpfx Agjzdqdfe Togn Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1787, functionality: fully functional, temperature: 1,150 °C, total length: 23,700 mm, conveyor belt width: 620 mm, heating capacity: 320 kW (435.08 HP), pass-through height: 100 mm, The system has seen very little use and is in excellent condition. Podpezclphjfx Ag Tegn TECHNICAL DETAILS Maximum operating temperature: 1150°C Belt width: 620 mm Installed heating capacity: 320 kW in 8 zones Fuel: Natural gas Operation: Hydrogen + Nitrogen (N2 + H2) integrated Usable height: 100 mm Dimensions Infeed table length: 2 m Burn-off zone LED3 length: 1.5 m Sintering zone length: 7.5 m Rapid cooling zone length: 1 m Convective cooling zone length: 2 x 4 m Flame-free outlet with air shower length: 2 m Outlet table length: 2.7 m Total system length: 23.7 m Total system width: 2.3 m MACHINE DETAILS Natural gas consumption: 25 m³/h (80 mbar) N2 consumption: 45-65 m³/h (max. 80 mbar) H2 consumption: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temperature) EQUIPMENT Flame-free outlet Ceramic muffle Dual thermocouples Programmable Online diagnostic system Low NOx RS recuperative burners SiSiC burner tubes LED 3 de-waxing zone (utilizes the chemically bound energy of waxes and improves burn-off conditions, especially for heavy powder metallurgy parts (>0.9 kg)) "Target-Actual value belt speed comparison" function

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Podpfx Agjzb Idrj Togn Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Pgsdpfxszb Idfe Ag Tjn Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: RA 7512-3052-FA, total width: 550 mm, total length: 850 mm, total height: 350 mm, overall weight: 25 kg, Highest accuracy in the Hexagon measuring arm series! TECHNICAL DETAILS Measuring range: 1.2 m Podpfx Aszclvnjg Tegn Inspection bar length: 305 mm Inspection sphere diameter: 25 mm MACHINE DETAILS Dimensions & Weight External dimensions of transport box: 850 x 550 x 350 mm Total weight incl. transport box: 25 kg EQUIPMENT Mobility Pack FP2-2659-FA (wireless connection to the computer possible) Notebook ASUS / Win 10 / SSD Software PcDmis 2016 / RDS software Transport case 3 magnets Probe box with 3 probes 6 mm ruby ball 3 mm ruby ball 15 mm calibration sphere Dust protection cover Complete cable set USB stick with RDS software

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,297 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! In January 2025, a new spindle was installed by the manufacturer! The machine has been regularly maintained! Previous use: The machine was primarily used for precision machining. Roughing operations were only carried out to a limited extent. TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 2,200 mm Travel range Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) Vertical: 10,000 rpm Pgodpfx Aozb D Aqsg Ten Spindle speed S1 (continuous operation) Universal swivel head 2-axis: 18,000 rpm Vertical milling head: TVS 10,000 Swivel milling head: TU 18,000 Tool holder: HSK 63 A Tool changer: 40 tool positions MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (-15 %, +10 %) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 99,222 h Program run time: 61,297 h EQUIPMENT High-rigidity gantry design Precise linear guides and ball screws Generous working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Coolant system Chip conveyor Swiveling milling head with 4th/5th axis Maintenance and service documentation

Condition: ready for operation (used), Year of construction: 2024, feed rate X-axis: 5 m/min, The machine has already been dismantled and stored. TECHNICAL DETAILS Adjustable speed: up to 5 m/min Roller pressure: pneumatic Adjustable temperature EQUIPMENT Manual system Swiveling, patented control panel Monochrome display Pedpfx Aszb Ip Ieg Tjgn Automatic sheet separation Anti-curl technology Compact design Faster Foiling KIT Ultra-quiet compressor Console on wheels IVIVID Matrix Omni-Flow Feeder 380 High-stack feeder LC display Adjustable front air flow Central suction belt Note: Accessories are without guarantee. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Psdpfx Aszcuyijg Tjgn Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, tilt adjustment saw blade: 45 °, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Pedpfezdkttox Ag Tegn Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Safety devices Prepared for dust and chip extraction

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 71971, total length: 3,070 mm, total width: 2,425 mm, product height (max.): 350 mm, roller width: 950 mm, production capacity: 5,000 unit/h, Automatic shrink wrapping machine with continuous side sealing! TECHNICAL DETAILS Maximum production capacity: 5,000 units/hour Product dimensions Product height: max. 350 mm Product length: variable Film/roll dimensions Maximum film roll width: 950 mm Maximum film roll diameter: 350 mm Suitable films: Polyolefin, PVC, polyethylene, and polypropylene Sealing unit Sealing bar length: 820 mm Sealing system: continuous side sealing Transverse sealing bar: with PTFE coating Pjdpfx Aszdkr Njg Tegn MACHINE DETAILS Operation: 7" color touchscreen Operating modes: automatic and manual Control: integrated PLC control Production counter integrated Total power: 3,850 W Power supply: 380 to 415 V / 3 phases + N + PE Power consumption: 15.5 A Dimensions & weight Dimensions (L x W x H): 3,070 mm x 2,425 x 1,765 mm Machine weight: 1,140 kg EQUIPMENT SMIPACK T852H shrinking tunnel Continuous side sealing with hot knife Transverse sealing bar with PTFE coating Electronic temperature control Automatic film tension control Automatic adjustment of product spacing Electronic speed regulators Color touchscreen with extended user interface Integrated PLC control Production counter Diagnostic system for malfunctions Parameter monitoring Foldable top cover for quick maintenance Motorized, synchronized conveyor High-quality guides and rollers Industrial control buttons from Lovato Access to the sealing area for cleaning and adjustment Suitable for polyolefin, PVC, and special films

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 216327, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table length: 2,000 mm Table width: 510 mm Tool holder: ISO40 Podpozdf Dhefx Ag Tjgn Max. spindle speed: 12,000 rpm MACHINE DETAILS Control system: Mazatrol 640M Operating time according to control system display: 40,843 h Dimensions & Weight Dimensions (L x W x H): 5,120 x 3,000 x 2,800 mm Unladen weight: 8,250 kg EQUIPMENT Chip conveyor Tool magazine with 30 positions Tools included

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, center width: 1,500 mm, center height: 250 mm, swing diameter over bed slide: 500 mm, spindle speed (max.): 2,800 rpm, controller model: Monforts Control System MTC K, The machine was overhauled in 2017! The corresponding invoices are available upon request. TECHNICAL DETAILS Swinging diameter over bed: 500 mm Swinging diameter over slide: 290 mm Distance between centers: 1,500 mm Spindle bore: 70 mm Center height: 250 mm Spindle speed: 2 - 2,800 rpm MACHINE DETAILS Control system: Monforts Control System MTC K Control method: Teach-in Psdjzdfzaspfx Ag Togn Dimensions & Weight Dimensions (L x W x H): 3,350 x 1,550 x 1,800 mm Net weight: 3,300 kg Transport packages: 1 EQUIPMENT Fixed steady rest 3-jaw chuck Documentation CE marking

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Table length: 1,500 mm Table width: 660 mm Tool holder: ISO40 Max. spindle speed: 10,000 rpm MACHINE DETAILS Podpfx Agszdfgps Tsgn Control system: Fanuc 18i-MB Power: 38.4 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT External coolant system Chip conveyor Tool magazine with 32 positions CE marking