Used 500 Mm Faceplate for sale (80,099)

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Hnedpfjz Izmiex Andju Weight: approx 4,5 T

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: Hnedpfx Ansmkixwodsu - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, Year of construction: 2016, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, roll pitch: 80 mm, total width: 600 mm, total height: 150 mm, total length: 10,000 mm, conveying length: 10,000 mm, input voltage: 24 V, axle spacing: 80 mm, overall weight: 300 kg, TAF item number: 1000006288.1 Manufacturer: Heber Fördertechnik Year of manufacture: 2016 Overall dimensions (L x W x H) in mm: 10,000 x 600 x 150 Width including side rail in mm: 600 Side rail height in mm: 140 Conveyor width in mm: 500 Conveyor length in mm: 10,000 Conveyor height in mm: 150 Hnsdpjz Ibzgefx Andsu Roller pitch in mm: 80 Support structure: none Support roller axle type: steel, bolted Support roller diameter in mm: 50 Carrying rollers per axle: 1 Carrying roller material: steel Drive: 24V motorised roller Motor specifications: Interroll, 24V, EC310, 0.05, 0.18 Conveyor speed in m/s: 0.6 Net weight in kg: 30 (per linear metre) Condition: used / fully functional Functional test: OK

Condition: good (used), Year of construction: 2016, Ventilation duct, ventilation damper, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper, fire damper, shut-off device -Manufacturer: TROX, ventilation duct fire damper shut-off device -Type: FK-EU -Dimensions: 470/500/H420 mm Hodszuawvjpfx Andenu -Weight: 18.4 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center Hsdsg Si Npspfx Andenu -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H190 mm -Weight: 87 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 540 mm, total length: 1,050 mm, overall weight: 10 kg, conveyor belt width: 500 mm, inner radius: 800 mm, outer radius: 1,600 mm, TAF article number: 1000005015 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 90° x 1,050 x 70 Width incl. cheek in mm: 540 Cheek height in mm: 60 Conveyor width in mm: 500 Substructure: Not available Curve (degrees): 90° Curve radius, inside in mm: 800 Curve radius, outside in mm: 1. 600 Idler roller Axle type: Threaded rod M8 / nut M8 Idler roller diameter: in mm 50 Idler roller per axle: 1 Idler roller material: Plastic Hnodpfxswylzas Andsu Roller pitch, inside in mm: 55 Roller pitch, outside in mm: 100 Drive: Gravity Net weight in kg: 10 Function test: Used, fully functional Condition: Ok

Condition: used, Surface grinding machine, grinding machine, surface grinding machine-horizontal, surface grinding machine -Manufacturer: Finke, horizontal surface grinding machine with magnetic plate -Magnetic plate: 550 x 200 mm -Traverse paths: x 500 mm / y 260 mm / z 260 mm -Drive: 1.5 kW Hnjdpfxjh Ic Ntj Andou -Grinding wheel: Ø max. 200 mm -Dust extraction device -Transport dimensions: 1950/1300/H1590 mm -Total weight: 1108 kg

Condition: used, Year of construction: 2018, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker, clothes locker -Manufacturer: Pavoy, steel locker: three-winged, compartment width 30 cm -Width: 930 mm -Depth: 500 mm -Height: 1850 mm -Doors: lockable, without lock -Number: 2x lockers available -Price: per piece Hjdpfxethrwcj Andjnu -Weight: 51 kg

Condition: used, Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable Hjdpsb Uhn Sofx Andsnu -with counter -Table height: 361 mm -Table surface: 1545 x 300 mm -Table thickness: 20 mm -Dimensions: 1545/500/H361 mm -Weight: 222 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm Hnsdpfxsg Si I Io Andou -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H310 mm -Weight: 86 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm Hnodpsg R Tfuefx Andsu -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H315 mm -Weight: 111 kg

Condition: good (used), The scope of delivery includes: 16x shelf connectors, used Manufacturer: Nedcon Type: NS Material color: orange Head plate dimensions: approx. 140 x 117 mm for a shelf spacing of: approx. 500 mm Suitable for a frame profile: 120 mm Profile dimensions: approx. 60 x 40 mm Borehole diameter: approx. 10 mm Hodpfsi Euu Ujx Andonu Weight: 1.75 kg/piece.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp MultiGrip bucket / MG.015.050 / MS01 / 500 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,420.00 net / €2,879.80 gross - Excavators up to: 1.5 tons - Weight approx.: 55 kg - SAE capacity: 33 liters - Cutting width: 500 mm - Maximum opening: 340 mm - The bucket is made entirely of HARDOX. - The MultiGrip combines the two attachments, a deep bucket and a grab, into a single tool. Advantages of the Holp MultiGrip bucket: - Cylinder with hardened piston rod - Only the grab swivel lines are needed for operation - Robust mounting in the side wall - Safe gripping and transporting - Stable shafts connect the two fingers (forming a 3-point grip for small parts) - Significantly lighter than a grab Hsdpeyl Hdfefx Andsnu - Up to 30% more earth can be loaded into the bucket during excavation work - Minimization of damage caused by falling material The MultiGrip is suitable for all excavation and grabbing tasks; it is ideal for moving stones, filling earth, and grabbing wood and brush, and it is significantly faster than a grab. It can grab and sort all types of materials, even earth or grass. Due to its unique shape, the MultiGrip bucket has optimal penetration and handles bulky material well. We have many other Holp products in our warehouse that are immediately available! Please contact us at [phone number] or [email address] for more information. Upon request, we will be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Please contact Marius Herden for further information.

Condition: good (used), faceplate, faceplate chuck, four-jaw chuck, facing chuck -Faceplate: chuck size Ø 500 mm Hnedewc Rkxopfx Andeu -Mounting: Short taper 8 (Ø 136-139 mm) -Bolt circle: Ø 173 mm -Through hole: Ø mm -Groove width: 20 mm -Dimensions: Ø 500 x 120 mm -Weight: 58 kg

Condition: new, Year of construction: 2026, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Included in the scope of delivery: 1x End upright extension, new Design: Universal Material color: RAL 5010 Prussian blue Overall height: 650 mm Usable height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile dimensions: 45 x 45 mm angle Hole grid: 5 x 25 mm Hole diameter: 30 x 10 mm Weight: 6.83 kg / piece Our services at a glance: (Prices upon request) - Assembly, installation Please note our general assembly conditions - Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Hnjdpfedd Ev Nsx Andsu - Delivery with our own fleet (without unloading) Shipping costs upon request!

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm Hsdpfeg Si Ntex Andonu -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H320 mm -Weight: 121 kg

Condition: used, diameter 500 mm hollow 80 mm weight 90 kg Ø 500 mm Passage: 80 mm Hole circle: 85 mm Hjdpfx Anoy S Dpajdsnu Weight: 90 kg

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,550 mm, total width: 2,250 mm, total height: 2,530 mm, overall weight: 5,200 kg, Special Offer – 5% Discount Available! Surface Grinding Machine SGC512AHD – Moving Column Type The MTP SGC512AHD Surface Grinding Machine is a heavy-duty precision grinder designed for machining large flat surfaces in tool rooms, production facilities, and metalworking workshops. Its moving column design, rigid cast-iron construction, and Mitsubishi PLC touchscreen control ensure high accuracy, excellent stability, and reliable performance. Hardened and precision-ground guideways with Durcite-B coated sliding surfaces reduce friction and provide smooth, accurate movement. The hydraulic table drive guarantees stable operation, while the precision spindle produces an excellent surface finish. Main Features • Mitsubishi PLC touchscreen control • Electronic handwheel • Moving column construction • Hardened and ground guideways • Durcite-B guideway coating • High grinding accuracy • Hydraulic table drive • Heavy-duty cast-iron construction • CE certified Standard Equipment • PLC touchscreen control • Electronic handwheel • Grinding wheel • Wheel flange Hsdpfxey Hr Uye Andjnu • LED work light • Electromagnetic chuck • Balancing stand • Balancing arbor • Safety guards • Demagnetizer • Coolant system • Diamond dresser • Machine feet • Central lubrication • Tool kit Included Equipment • Magnetic separator with paper filter • Full machine enclosure • Parallel dressing device • Dust extraction system • 2-axis digital readout (DRO) • Integrated magnetic chuck controller • 6 kW frequency inverter • Diamond dresser • Additional wheel flange Technical Specifications • Model: SGC512AHD • Brand: MTP • Table size: 500 × 1200 mm • Magnetic chuck: 500 × 1200 mm • Longitudinal travel: 1140 mm • Cross travel: 540 mm • Maximum spindle-to-table distance: 570 mm • Maximum workpiece weight: 800 kg • Grinding wheel: 350 × 20–40 × 127 mm • Hydraulic table speed: 5–25 m/min • Spindle motor: 5.5 kW • Spindle speed: 1440 rpm • Hydraulic motor: 2.2 kW • Vertical feed motor: 0.75 kW • Machine dimensions: 3550 × 2250 × 2530 mm • Machine weight: approx. 5200 kg Applications • Tool rooms • Manufacturing plants • Metalworking workshops • Precision grinding of tool steel, structural steel and cast iron • Production of precision machine components Transport & Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected for transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide technical advice, spare parts, and comprehensive after-sales support. Contact us for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: used, Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate Hnsdpfx Ascpkk Rondou -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 180 mm -Plate thickness: 25 mm -with: support ribs -Weight: 90 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 500 mm Hedpscktx Tofx Andonu -Height: 120 mm -Groove: mm -Dimensions: 660/680/H120 mm -Weight: 129 kg

Condition: used, Year of construction: 2007, machine/vehicle number: 001491U, For sale Used Abus single-girder overhead crane, approximately 7,550 mm span x 500 kg capacity. * Stored indoors * Technically 100% functional and inspected All our new and used cranes that we install and deliver come with a warranty! We can also supply our cranes with the following options: * Adjustment of length and/or height and possible repainting * Power rail / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist. Hjdpew I N T Ujfx Andonu Overhead crane. Single-girder. Chain hoist.

Condition: good (used), Year of construction: 2016, functionality: fully functional, roll diameter: 50 mm, roll width: 500 mm, total width: 600 mm, total height: 150 mm, total length: 1,870 mm, conveying length: 1,870 mm, construction width: 600 mm, construction height: 150 mm, input voltage: 24 V, overall weight: 60 kg, empty load weight: 60 kg, Manufacturer: Heber Year of manufacture: 2016 Overall dimensions (L x W x H) in mm: 1,870 x 600 x 150 Width including side rail in mm: 600 Side rail height in mm: 140 Conveyor length in mm: 1,870 Conveyor width in mm: 500 Conveyor height in mm: 150 Roller pitch in mm: 80 Support roller axle type: Steel – bolted Support roller diameter: 50 mm Support rollers per axle: 1 Support roller material: Steel Hedpfxoz Diknj Andonu Motor type: Motorised roller Motor manufacturer: Interroll Motor specifications: 24 V / EC310 / 0.05 – 0.98 Conveyor speed in m/s: 0.6 Net weight in kg: 60 Condition: second-hand / fully functional Functional test: OK

Condition: good (used), Year of construction: 1975, 13 stations shaft Ø: 50,4 mm strip width: 500 mm strip thickness: 1,5 mm Hedpfsbif E Eox Andonu

Condition: new, Year of construction: 2026, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Included in the scope of delivery: 1x End frame extension, new Design: Universal Material color: RAL 1018 Zinc Yellow Overall height: 650 mm Usable height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile dimensions: 45 x 45 mm angle Hole grid: 5 x 25 mm Hole diameter: 30 x 10 mm Weight: 6.52 kg / piece Our services at a glance: (Prices on request) - Assembly, installation Please note our general assembly conditions - Shelf inspection Hnodpedd Ewbjfx Andsu Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelf systems - Delivery with our own fleet (without unloading) Shipping costs on request!

Condition: excellent (used), Touch panel Space requirements: Width: 600 mm Depth: 500 mm Hnsdpfx Ansg Af U Eodsu Height: 90 mm