Used Amc Mechanization for sale (5,911)

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Max. part diameter : 30 [mm] - Max. part thickness : 2 [mm] - Shocks per minute : 150 - Distance between mounts : 230 [mm] - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm] Lrjdpfxjuhahao Ac Aon

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] Ledpfxeuhag No Ac Aern - Max. part diameter : 30 [mm] - Max. thickness : 2 [mm] - Shocks per minute : 150 [H/min] - Distance between mounts : 230 [mm] - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm]

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Max. part diameter : 30 [mm] - Max. part thickness : 2 [mm] - Shocks per minute : 150 - Distance between mounts : 230 [mm] Lrsdpfxouhag Aj Ac Asn - Distance between table and slide : 148 [mm] - Table diameter : 220 [mm]

Condition: excellent (used), Mechanical gripper for concrete blocks - I have several grippers from 120cm - up to 250cm. Lodpfx Aowpl Rgec Ajrn For sale mechanical gripper designed for moving concrete blocks, edges, curbs and other prefabricated elements. Solid, steel construction with a mechanism based on chains. Mounting for a construction machine (excavator, HDS, forklift).

Condition: used, Year of construction: 1996, sheet width 1350 mm plate thickness 3 mm cutting angle 1° 30' no. of strokes 35 Hub/min table height 850 mm rear stop 450 weight of the machine ca. 1200 kg dimensions ca. 1700 x 1650 x 2000 mm manually operated back gauge 450 mm Lrjdjwngqfopfx Ac Aen working lifght included safety gate included

Condition: good (used), Year of construction: 2000, pressing force: 15 t, table width: 300 mm, table length: 400 mm, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Lrodpoyc R Nmsfx Ac Aon Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Lredpfjyc R Uiex Ac Ajn Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Hand revolver lathe: GDW Type/Model: RD 250 Condition: Used Center height: 125 mm Distance spindle nose – revolver head max.: 400 mm Swinging diameter over bed: 260 mm Swinging diameter over cross slide: 128 mm Spindle head DIN 55027: Size 4 Spindle bore: 38 mm Internal taper similar to DIN 228: MK 5 Collet bore: 26 mm Continuously variable up to: 60-3,000 rpm Frequency-controlled AC motor 100% ED, 70 Hz: 4.6 kW Revolver slide travel: 100 mm Cross slide travel: 90 mm Revolver tool holder: 6 x 3/4" Length x Width x Height: approx. 1300 x 700 x 1,400 mm Weight depending on equipment: approx. 520 kg Connected power: 9 kW Lrodpfjzcb Rujx Ac Ajn Equipment: -Vibration-damped direct drive to the main spindle, continuously variable with magnetic brake for the main spindle and spindle stop in case of emergency stop -6-position inclined revolver slide with Ø ¾" tool holders -Continuously variable feed rate adjustment -For revolver slide with feed drive -Collet chuck (pneumatically operated) -Extensive collet set -Emergency stop button -Coolant system -Spindle guard

Condition: used, Mechanical Shear BOMBLED type 9G Lrsdpfx Aozdilisc Aon Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Weight: approx 4,5 T

Condition: used, functionality: fully functional, Technical data: Distance between centers approx.: 500 mm Center height over bed: 125 mm 16 spindle speeds Range 1: from 110 – 900 rpm Range 2: from 440 – 3600 rpm Lrjdpfozd Urmsx Ac Aen Space requirement, length x width: 1.2 x 0.6 m Estimated weight approx.: 400 kg

Condition: like new (used), Year of construction: 2023, GM – DC330MINI V4 Label Converter Year of Manufacture: 12/2022 _____ Machine Specifications and Equipment:  Max Webwidth: 330mm  Speed up to 65 m/min, semi rotary; 72 m/min full rotary  Unwinding max. 700 mm  Rewinding max. 450mm  Touch screen  Flexo Unit Corona  Webedge Control Lredpfx Asv Aa Twsc Asn  Semi-rotary die cutting  Automatic register check  GEW – UV  Lamination  GM SmartCrush _____

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg Lredpfx Asy Raitoc Ajn New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type "E10-S" - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - original instruction manual

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Lredpfxodzqn Uo Ac Ajn Total weight: approx. 40 kg

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m Lrjdpfx Aceu Icppe Aen further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW Lodpju Icp Asfx Ac Asrn weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Year of construction: 1979, Technical details: Ljdpou Nfinjfx Ac Aern pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1985, Technical details: Ljdpeu Icwgefx Ac Aorn Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Lrjdpju Axzkofx Ac Aon Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: good (used), functionality: fully functional, 1 x Mechanic’s lathe Weiler RDU 260-80 Machine with complete accessory package, in good condition. Technical data: - Spindle bore: 38 mm - Spindle speeds: 125 - 2800 (left/right) - Center height: 130 mm - Distance between centers: 350 mm Equipment: - Crank cross slide with Multifix A quick-change system - Crank tailstock MK 2 - Hand lever cross slide - Hand lever tailstock with draw-in collets - Parting tool slide - 6-position turret - Collet chuck with draw-in collets - Coolant system Accessories: 65 x draw-in collets 358 E C - 5 1 x draw-in collet in tailstock 366 E (MK 2) 1 x quick-change tool holder Multifix A with 1 cassette 1 x 3-jaw chuck Röhm 140 mm Further accessories, such as collets for the tailstock or tools for the tailstock/turret, are available at an extra cost. The machine can be inspected while powered. Lodpfx Acjzczbys Ajrn

Condition: new, functionality: fully functional, Hand lever quick-change chuck Spindle speeds from 110 - 3600 rpm Multifix A head Collets Ledpezc I A Refx Ac Ajrn

Condition: used, sheet width:2500 mm Lrsdpfx Ascxxqcec Ajn plate thickness:1,25 mm total power requirement:2,2 kW dimensions of the machine ca.:1,40 x 3,40 x 1,50 m

Condition: used, machine/vehicle number: 739791201, sheet width:2040 mm plate thickness:3,25 mm distance between columns:2200 mm total power requirement:7,5 kW Lrjdpfx Aecxxtysc Asn dimensions of the machine ca.:2,55 x 2,3 x 1,4 m

Condition: used, Year of construction: 1987, machine/vehicle number: 87 / 906, pressure:63 t stroke:8 - 80 mm no. of strokes:60 - 300 Hub/min distance between columns:720 mm table surface area:710 x 700 mm hole in the table:345 x 100 mm column travel -side:320 x 200 mm ram surface:500 x 400 mm ram adjustment:80 mm throat:350 mm dayligth:250 / 275 mm feed length:220 mm Lsdpfxecxxpce Ac Aorn table above floor:1000 mm total power requirement:9,2 kW weight of the machine ca.:6,5 t

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, sheet width:2.050 mm plate thickness:1,5 mm Ljdpfx Acscxxraj Aorn distance between columns:2100 mm column arm:100 mm table width:300 mm number of strokes - loaded:50 total power requirement:4,0 KW weight of the machine ca.:1,85 t

Year of construction: 2000, condition: new, 3x supply system for sliding ring seals / pressure tank Manufacturer: Fluiten Material: Stainless steel (1.4301) Year of manufacture: 2000 Volume: 12 L Pressure (max.): 16 bar Temperature (max.): 99 °C Height: 430 mm (without pressure gauge) Diameter: 219 mm Lredpfx Acod Tqz Ts Aen Includes: thermometer, pressure gauge, and sight glass Condition: new and unused, partially in original packaging Connections: see drawing The tank can be inspected at any time by prior arrangement in 76694 Forst.