Used Baler Amos Opus 1200 for sale (5,087)

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Bodjy S Rqwjpfx Aiheli Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Bedpfsy R Nnfox Aiheli Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1200 mm -Cross-section: 80 x 40 mm -Image: 410 mm (see sketch in the photos) -Transport dimensions: 1345/600/H90 mm Bodjzg Urropfx Aihjli -Weight: 81 kg

Year of construction: 1995, operating hours: 1,765 h, condition: used, Screen design: 2-deck screen box Screening system type: 2-deck classifying screen Active grate spacing: feed area approx. 4000 x 2500 mm Feed height: approx. 3500 mm Blodpfx Aiozh Hcrehji

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2100 x 1200 mm -Table height: 740 mm Blsdpfxjxnwble Aihji -Plate thickness: 130 mm -Transport dimensions: 2100/1200/H740 mm -Weight: 2400 kg

Condition: used, This used steel stacking bin with a fixed construction is a robust and durable solution for storing and moving heavy goods in warehouses, workshops, and industrial environments. Thanks to its strong construction and practical access, this bin is ideal for intensive daily use. Blodpoy Hp Evsfx Aihoi The stacking bin is manufactured from steel,

Condition: used, Plastic pallet box 1200x1000 mm – closed pallet box 640 liters on runners This 1200x1000 mm plastic pallet box is a robust and versatile solution for storing and transporting large volumes of goods within warehouses, distribution centers, and industrial environments. Bedpfx Asy Hp Epoihsli Thanks to its closed design and sturdy construction, this

Condition: used, Used steel stacking rack 1550x1200x300 mm, suitable for stanchions 60. 3 mm. A steel stacking rack is the solution for those seeking maximum flexibility and efficiency in warehouse storage. Blodpfxsy Hpzqo Aihsi Designed for efficient and safe storage of one europallet. The robust construction of hot-dip galvanized steel makes the rack

Condition: used, Plastic pallet box 1200x1000 mm – perforated pallet container 640 liters on runners Blsdpfxey Hpx Ao Aihji This 1200x1000 mm plastic pallet box is a robust and versatile solution for storing and transporting large volumes of goods within logistics and industrial environments. Thanks to its sturdy construction and spacious capacity, this pallet box is

Condition: used, This hot-dip galvanized stacking rack is a durable and flexible solution for the efficient storage and stacking of goods on block pallets. Thanks to the robust steel construction and corrosion-resistant finish, this stacking rack is ideally suited for intensive use in warehouses, logistics environments, and outdoor Bodpoy Hpvhofx Aiholi

Condition: used, Used green lacquered steel stacking bin 1200x850x670mm. The storage bin stands on four sturdy legs, making it easy to pick up with a forklift or pallet truck. The stacking bin also has four upright corners with lifting eyes. This makes the bin easy to stack. Blodpfx Aisw Swy Rohoi Open long front for easy access to goods. L: 1200, W: 850,

Condition: used, Used steel mesh container – fixed construction with drop-down flap – Euronorm 1200 x 800 mm This used steel mesh container is a robust and durable solution for storing, transporting, and organizing a wide variety of goods. Bljdpfx Aszhwtneihei Thanks to the standard Euronorm dimensions of 1200 x 800 mm, the container is easy to combine with Euro

Condition: excellent (used), Knürr-Heinzinger Type: PHN 1200-4 Power Supply: Mains 1200 Volts 4 Amperes Bjdszgcbhopfx Aiholi Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: used, mileage: 245,000 km, power: 420 kW (571.04 HP), fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,200 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,850 mm, loading space width: 2,470 mm, loading space height: 2,600 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, spoiler, tail-lift, traction control, trailer coupling, General information Year of manufacture: 2022 Axle configuration Tyre size: 315/70R22,5 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle: Double wheels; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 11.980 kg Carrying capacity: 7.020 kg GVW: 20.500 kg Functional Tail lift: B.A.R, tail lift, 1500 kg Make of bodywork: Thermoking UT 1200 Cooling engine: diesel and electric Warranty Warranty: spare wheel 100% = Additional options and accessories = - Air horn - Air suspension - Air Suspension Seats - Alarmsystem - Aluminium fuel tank - Coupling - Coupling Ringfeder - Full air suspension - Heated driver's seat - Heavy duty engine brake - Lane Assist - LED lighting cargo area - Lock diff - Outside temperature display - Radio - Refrigerator - Roof spoiler - Sleeper cab - Spare wheel - Suspension seat 2x - Toolbox stainless steel 2x - Visor = Remarks = Thermoking UT 1200 Diesel/Electric Cooling/Freezing/Heating Bar lift 1500 kg Vanguil Rinfeder Chears with air 2x Rvs Toolbox 2x Spare tyre 100% Blodpfxozaccyj Aihei

Condition: new, Year of construction: 2026, functionality: fully functional, The Impuls Packaging Cobot is an intelligent automation system designed to move and position products efficiently and precisely. It handles the automatic picking, placement, and arrangement of products on pallets or within packaging units, ensuring a smooth and continuous production flow. Thanks to the integrated automation technology, various packing patterns and workflows can be stored directly in the system and recalled as needed. This enables the Cobot to be flexibly adapted to changing products and production requirements without any setup downtime. A range of gripper options is available for the Cobot, including vacuum grippers (either pneumatically operated or with an integrated vacuum motor) as well as specialized gripping systems for different applications. Together with our German partner in the Frankfurt region, we develop the optimal solution for your product to ensure precise, safe, and efficient handling. The system is operated via a user-friendly interface, allowing for easy setup and control without the need for programming skills. The Cobot’s compact design makes it easy to integrate into existing production lines while requiring very little floor space. Using our Cobot increases process reliability and reduces dependence on personnel bottlenecks due to illness or unfilled shifts, ensuring reliable and efficient production even with fluctuating staff availability. Typically, the Cobot pays for itself within the first year. System Features 1. 6-axis cobot robot for moving and placing products 2. Compact, space-saving design Blodpfx Ajyv H T Nsihei 3. Suitable for various pallet sizes 4. Multiple packing patterns can be stored and transferred to other systems 5. Easy operation with a graphical user interface, suitable for unskilled staff 6. Low energy consumption, minimal operating costs 7. Available with a variety of gripper options Technical Parameters 1. Maximum product dimensions: L1200mm, W1200mm, H500mm 2. Maximum product weight: approx. 20kg (depending on gripper weight) 3. Packaging speed: 6–10 palletizing cycles/minute (depending on product and pallet size; up to 32 packs/minute possible with multi-pick) 4. Maximum stacking height: 2000mm (600mm additional lift), arm reach up to 1680mm 5. Pneumatic connection required for operation 6. Connection voltage: 3Ph. 380V 50Hz, DC 24V connection 7. Overall power: approx. 3 kW 8. Machine weight: approx. 600 kg 9. Machine dimensions: approx. 3450x1500x3500mm 10. Noise level: > 60 dB We offer different safety concepts for the Cobot: Safety fence: Physically separates the working area so entry into the operation zone is prevented during operation. Safety sensors: Sensors monitor the working area and automatically stop the Cobot as soon as a person or object enters the danger zone. We are happy to advise you on which concept is best suited to your production. When ordering, you can select one of the systems; the other can be supplied for an extra charge.

Condition: used, Dimensions 150 x 160 x 200 cm. Blsdpfx Aszg Naqeihoi Main outlet diameter 10 cm. 2 valves front and back for draining.

Year of construction: 1981, condition: used, Pallet truck, pallet truck, stacker, pedestrian pallet truck, forklift truck -Connection: 380 volts -Load capacity: 1200 kg -Lifting height: 990 mm -Dead height: 1450 mm Blsdpfx Aob A Ibkjihoi -Width: 670 mm -Length: 1400 mm -Tin length: 920 mm -Empty weight: 300 kg

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h Blsdpfx Aszdn H Rsihoi bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Bjdjzdny Rspfx Aihsli Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Bjdpfx Aezdnxgeihsli Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, machine/vehicle number: FN471269, Year of construction: 2014, operating hours: 13,651 h, load capacity: 1,800 kg, lifting height: 3,600 mm, free lift: 1,750 mm, fuel type: electric, mast type: duplex, construction height: 2,250 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: FN471269 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Battery year of manufacture: 2014 Bsdozif Ntepfx Aihjli Description: I have kept the text concise and adapted the device data to the Jungheinrich EFG 218: For sale is an electric 3-wheel forklift, a Jungheinrich EFG 218. The forklift is ready for operation and fully functional. The visual and technical condition are good. Vehicle data: Year of manufacture: 2014 Operating hours: 13,651 h Load capacity: 1,800 kg Mast type: Duplex Lifting height: 3,600 mm Overall height: 2,250 mm Free lift: 1,750 mm Fork length: 1,200 mm Battery year of manufacture: 2014 Chassis number: FN471269 Internal number: R0784 The device is immediately available. A charger can be ordered separately upon request. Quick and uncomplicated transport is possible upon agreement. Errors and prior sale are subject to change. Sale is made with the exclusion of any warranty or guarantee. Fork positioner, 3rd valve, 4th valve.

Condition: ready for operation (used), Brand: HSM Type: V-press 860 plus Year of manufacture: 2012 Pressing force: 418 kN Voltage: 400 Bledpezg Dptjfx Aihoi Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Video available upon request.

Condition: used, Year of construction: 2000, Diesinking / EDM Travel distance X: 825 mm Travel distance Y :680 mm Travel distance Z: 405 mm Bodpovtfn Usfx Aihsli table size X: 1200 mm table size Y: 850 mm max. workpiece weight: 3000 kg electrode changer: 50 - time Generator POCON 60 Quill holder: EROWA heavy duty adapter O module halogen light

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control system: Mitsubishi - 64-bit CNC Generator power: 70 Amps - multipulse Travel ranges (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-position pick-up disc changer Working tank (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump) The OPS INGERSOLL wire erosion machine GANTRY 1200 HSJ / 64-bit, manufactured in 2006, has undergone a comprehensive and professional overhaul in our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled to over 70%. All relevant wear parts were carefully inspected. The following overhaul work was carried out on the machine mentioned above: Replacement of the ball screw drive and ball bearings of the X, Y and Z axes. Replacement of all (4) ball screw drives of the tank drive. Inspection and testing of the C-axis for tightness and accuracy. Geometric inspection of all axes according to the OPS INGERSOLL protocol. Thorough cleaning of the entire machine base. Cleaning of the entire working tank including replacement of the felt wipers. Complete repainting of the machine. Overhaul of the dielectric pumps. Replacement of all hydraulic and dielectric lines. Replacement of all pneumatic lines. Cleaning of the control cabinet, generator and the control system. Replacement of all fans and batteries. Overhaul or replacement of all power supplies, units and servo amplifiers. Laser measurement after the machine overhaul. Finally, the machine was subjected to an extensive erosion test in accordance with the quality and testing specifications of OPS INGERSOLL. Blodpfx Aezgckvoihsi The machine is immediately ready for use and is ideally suited for reliable production operation.

Condition: used, mileage: 775,771 km, power: 330 kW (448.67 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 12,280 kg, maximum load weight: 13,720 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,500 mm, next inspection (TÜV): 12/2026, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space volume: 39 m³, loading space length: 7,200 mm, loading space width: 2,482 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, spoiler, tail-lift, traction control, trailer coupling, * German vehicle * Original mileage: 775,771 km * Condition: see photos * Body: Schmitz Cargobull refrigerated box, type MKO-FP45 Cool DLZ * Undercarriage refrigeration unit: Thermo King, type UT1200 * Cooling capacity up to -20°C with diesel or electric operation * Thermo King control unit in the cab * Double-deck freezer box * Dimensions: Length = 7,200 mm x Width = 2,480 mm x Height = 2,200 mm * Tail lift: BÄR, type BC2000 - C4 * Load capacity: 2,000 kg * Roll-over protection * Trailer coupling * Trailer load: 18,000 kg * ADDITIONAL PRICE, FREEZER TRAILER WITH TAIL LIFT/ THROUGH-LOAD FROM 2018: EUR 9,850,- * Cab: MegaSpace with 2 beds & 2 seats * Retarder * Automatic climate control * Refrigerator * Auxiliary heater * Two comfort seats, air-sprung, with seat heating * Lane keeping assist * ACC cruise control * Tag axle * Air suspension + raise/lower function * Emergency braking assistant * Multifunction steering wheel * Hill start assist * Attention assist * Active braking assist * Differential lock * ABS/ASR/ESP * Sunroof, electric, glass * Horn * Immobilizer * Keyless central locking * Reversing camera * Air-sprung cab * Electric windows * Spoiler * EBS * CB radio * On-board computer * Exterior mirrors, electrically heated and with enlarged glass * Armrest * Wheelbase: 4,500 mm * Gross vehicle weight: 26,000 kg Bsdpfjzhxlfjx Aihjli * Unladen weight: 12,280 kg * Payload: 13,720 kg * Double-deck If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our website at: [website address] We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods so that no false impressions arise in the buyer regarding the condition and suitability. Viewing and inspections are possible and expressly desired at any time by appointment. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale and errors excepted.