Used Behringer Eisele Vms 350 for sale (6,382)

Condition: used, Year of construction: 1986, machine/vehicle number: 0783, type of input current: three-phase, input voltage: 400 V, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health. Knjdpfxet A Ar So Afwea

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Kjdpfsvbwfnsx Afwjna

Condition: used, Year of construction: 1979, saw blade diameter 300 mm cutting diameter 100 mm saw blade turning speeds 40 / 80 U/min Knodpfx Aey N D Nnefwja capacity 90 degrees: square 90 mm capacity 90 degrees: round 100 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Knsdpfxsf Dwa Uj Afwsa

Condition: used, Year of construction: 1990, saw blade diameter 300 mm cutting diameter 90 mm turning speeds 40/80 U/min Kjdpfx Aey Ehx Ejfwsna total power requirement 1,5 kW weight of the machine ca. 350 Kg dimensions of the machine ca. 0,9 x 0,8 x 1,5 m Cold circular saw - Machine light - Coolant system

Condition: used, Year of construction: 2009, Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Sawing area flat 45°: 140 x 120 mm Sawing area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Knjdoygkvnjpfx Afwja Sawing range round 45°: 140 mm Sawing range round 30°: 110 mm Feed length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spray device Hydraulic material tension Hydraulic material feed Weight: approx. 1300 kg

Condition: used, Year of construction: 1994, functionality: unexamined, machine/vehicle number: 171982, saw blade diameter: 350 mm, main saw diameter: 350 mm, We offer this used EISELE LMS 350 P cut-off saw, year of manufacture 1994. Manufacturer: EISELE Model: LMS 350 P Serial number: 171982 Year of manufacture: 1994 Voltage: 380 V With double-button control and pneumatic clamps Equipped with a wood blade Knedpsy D H Dwsfx Afwea If you have any questions or need further information, please feel free to send us a message or give us a call.

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm Kedpjm Twgwsfx Afwena cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Kodpfsxln Ukjx Afwsna Weight: 425 kg Required space: 900 x 800 x 1800 mm

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg Kedpfjd Rxw Sox Afwjna

Year of construction: 1979, condition: good (used), machine/vehicle number: 2001, disk of circular saw-Ø: 400 mm cutting area at 90° round: 95 x 240 mm cutting area in mitre at 45° round: 75 x 180 mm disk rotations: 10,5 u. 21 upm Ksdpfx Afsfnrw Sjwsna engine: 380 V, 2,6/3,2 kW space needed: 1500 x 1100 x 2150 mm weight: 630 kg

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting range: Round 90°/45° right/left/30° right: 130/130/105mm Knsdpfx Afskfp D Towsa Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: defective spare-parts repository (used), Year of construction: 1975, functionality: unexamined, machine/vehicle number: 3015, rotational speed (min.): 40 rpm, rotational speed (max.): 80 rpm, input voltage: 380 V, EISELE VMS2-D045 Cold Circular Saw – defective / untested Selling a used EISELE cold circular saw, type VMS2-D045. The machine is explicitly sold as defective or untested. Sale is exclusively as a DIY project, a source of spare parts, or for repair. Kjdpfjy Uq U Isx Afwsna The saw was taken out of service for safety or age-related reasons. No guarantee on function, accuracy, or operational safety. The EISELE VMS series is considered a robust industrial metal cold circular saw with a solid machine construction and high cutting accuracy. Technical data Manufacturer: EISELE Type: VMS2-D045 Machine type: Metal cold circular saw / Vertical circular saw Semi-automatic version Suitable for steel, stainless steel, and profile materials Pneumatic vise Coolant system available Multiple saw blade speeds High-voltage connection 400 V Pneumatic saw feed Solid cast iron machine construction Key technical data of the VMS series Saw blade diameter, depending on the version, approx. 275–315 mm Cutting range up to approx. 100 mm round material 2 cutting speeds, approx. 40 / 80 rpm Motor power, depending on the version, approx. 1.4–3.6 kW Condition used Sold explicitly as defective untested condition ideal as a source of spare parts or a restoration project no warranty no returns Inspection is highly recommended Loading and transport by the buyer Note Technical specifications according to the nameplate or existing version. Year of manufacture and accessories, see photos. Sale is made excluding any liability for material defects.

Year of construction: 1979, condition: used, saw blade diameter 450/500 mm cutting diameter mm stroke mm total power requirement 3,6 kW weight of the machine ca. 1130 t Knjdpfsilfp Njx Afwja dimensions of the machine ca. m - Circular saw - semiautomatic - hydraulic

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min 0025 voltage 380 V clamping ja kW miter ja weight 700 kg Knsdpfx Afjvu Hlkswsa

Condition: used, Automatic band saw, used but technically in good condition. Maximum capacity: Ø 260 mm Knjdsw N Iw Iepfx Afwoa

Condition: good (used), Year of construction: 1988, Saw blade dimensions: 275 x 3.3 x 40 mm Cutting capacity for straight cuts: Profiles and angles/pipes/solid material: 65 x 130/90/60 mm For miter cuts: Flat profiles and angles/pipes: 75 x 90/90 mm 2 saw blade speeds: 2000/4000 rpm Drive motor: 380 V, 1/1.2 kW Space requirement: 750 x 450 x 750 mm Kedpozvw Uhjfx Afwona Weight:

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in excellent condition. This is a very special band saw; it operates fully automatically! - Auto feed control with cut monitoring - Saw band drive 5.5 KW - 10-120 M/min - 54 mm band - Clamping device for saw sections - Line laser Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long band life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material procurement By producing flat materials from large sheets, efficiency gains can be achieved in both storage and the purchase of raw materials. Clamping device for layered cuts (option) For sawing larger batch sizes, sheets can be stacked in layers and securely held in place using the optional vertical additional clamping device. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be extended out of the machine frame. Powered duplex chip brushes effectively clean the saw band, thereby increasing tool life. The brushes are automatically adjusted to the saw band and ensure consistent cleaning performance. Kodpfjzubxhox Afwona Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and utilizes the performance of modern saw bands more effectively. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw bands. Quick saw band change ensures the shortest possible setup times. In just two to three steps, the saw band can be moved to the change position. Band-guiding parts made of gray cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thereby increasing tool life. Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Movable material support table For easy loading and unloading by crane, the material table can be extended out from under the saw unit.

Condition: used, Year of construction: 2020, machine/vehicle number: 0102-260026, The Behringer SLB 230DG-HA is a semi-automatic hydraulic double-miter band saw designed for the precise cutting of profiles, tubes, and solid material. With miter adjustment up to 45° to the left and right, it is suitable for both straight cuts and angle cuts in metal fabrication and mechanical engineering. Technical Specifications Model Semi-automatic hydraulic double-miter band saw Cutting range (round) Ø 240 mm Cutting range (square) 240 × 240 mm Cutting range (flat) 310 × 200 mm / 270 × 240 mm Miter range 45° left/right, 30° right Cutting speed: 16–120 m/min Kedpfxoztwdws Afwona Drive power: 1.1 kW Band saw blade dimensions: 2,700 × 27 × 0.9 mm Machine weight: approx. 490 kg

Condition: ready for operation (used), functionality: fully functional, shelf height: 3,500 mm, Nedcon Frames – approx. 350 or 400 x 110 cm | inspected & used The Nedcon frames, measuring approximately 350 or 400 x 110 cm, come from our inspected used stock and are available immediately from our warehouse. They are ideal for expanding existing Nedcon pallet racking and heavy-duty racking systems. Thanks to their robust construction, the frames can be reliably used in daily warehouse operations. Matching crossbars can also be offered upon request. Data: Height: 350 cm or 400 cm Depth: 110 cm Color: Blue Racking system: Nedcon Used goods, available from stock, immediate delivery -- MULTIPLE UNITS AVAILABLE IMMEDIATELY -- Price: Negotiable You will receive an invoice with VAT shown. STILL HAVEN’T FOUND WHAT YOU’RE LOOKING FOR? Visit our website, where you can quickly view many offers and variations of the products! Transport: Delivery can be arranged by our partner logistics company, if desired; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your equipment, if required. Our recommendation: Please let us know your requirements... We will be happy to help you realize your projects, from planning to ordering and assembly. ARE YOU INTERESTED OR DO YOU HAVE ANY QUESTIONS? Kjdpszuxknjfx Afwjna Simply contact us via message or phone. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2017, operating hours: 818 h, Behringer HBE 321 A Dynamic, manufactured in 2017 – low operating hours, more information to follow. The machine is currently being delivered. - The photos show the original condition. Kodpszrgn Njfx Afwona

Condition: defective spare-parts repository (used), Year of construction: 1986, Behringer band saw, fully automatic, in perfect working order. Old, robust technology without sensitive electronics. Maximum cutting capacity at 90°: 500 mm Motor power: 5 kW Saw blade length: 6900 mm Kedpfx Ajzvnkyjfwjna Unfortunately, the machine was delivered without a control cabinet. As the previous operator scrapped it, the machine can now only be offered as a source of spare parts. Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices do not include VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Machine buying and selling WE BUY/SELL PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality, yet affordable machine for your production? Or would you like to sell yours? For further information or to contact us, please use the contact form.

Condition: used, Year of construction: 1998, machine/vehicle number: 0102-260022, The Behringer HBP 430N is a horizontal, double-column bandsaw designed for professional use in metalworking. It is suitable for precisely cutting solid materials, pipes, and profiles and impresses with its robust construction and high cutting accuracy. The machine is designed for straight cuts; depending on the configuration, miter cuts up to 45° are also possible. With a cutting range of Ø 430 mm or 600 × 430 mm and a continuously variable cutting speed of 17 to 110 m/min, it can be used in a variety of applications. The powerful 7.5 kW sawing motor, hydraulic workpiece clamping, and coolant system with 150 liters ensure reliable and economical operation. With a machine weight of 2,100 kg, the HBP 430N offers high stability and is ideal for daily use in metalworking, steel construction, and mechanical engineering companies. Technical Data HBP 430 N Working range 90° round Ø 430 mm Working range 90° flat 600 × 430 mm Working range 45° flat 320 × 430 mm Smallest material dimension 15 mm / 10 × 15 mm Smallest section length 10 mm Remaining piece length approx. 40 mm Cutting speed 17–110 m/min Coolant tank 150 l Kodpozq S Ncofx Afwjna Belt tension 80 bar Sawing motor 7.5 kW Hydraulic motor 2.2 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 11 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 22 A Fuse 35 A Cable cross-section min. 4 × 6 mm² Saw band dimension 5,800 × 54 × 1.3 mm Machine weight 2,100 kg Material support height 700 mm

Condition: used, Year of construction: 2005, machine/vehicle number: 0102-260023, The Behringer HBP 313 is a horizontal, double-column band saw for industrial metalworking. It is used for the precise cutting of solid materials, tubes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for both single-piece and series production. The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is continuously adjustable from 20 to 140 m/min. A coolant system with a 60-liter capacity and a band tension of 60 bar ensure high cutting quality and a long service life of the saw blade. The machine is powered by a 4.0 kW sawing motor. The electrical connection is 400 V / 50 Hz, and the control system operates with 24 V DC. With a weight of 1,960 kg, the HBP 313 ensures low-vibration operation and high processing accuracy. Technical data Working area Ø 310 mm / 500 × 300 mm Smallest material dimensions Ø 10 mm / 10 × 8 mm Smallest section length 8 mm Remaining piece length from 10 mm Cutting speed 20–140 m/min Coolant 60 l Band tension 60 bar Sawing motor 4.0 kW Hydraulic motor 1.5 kW Coolant pump 0.12 kW Chip conveyor 0.09 kW Connected load approx. 7 kW Mains connection 400 V / 50 Hz Control voltage 24 V DC Current consumption approx. 14 A Knsdpfjzq S Ilox Afwja Fuse rating 25 A Machine weight 1,960 kg Material support height 800 mm

Condition: used, Year of construction: 2012, machine/vehicle number: 0102-260024, The Behringer HBP 313N is a horizontal, double-column bandsaw for industrial metalworking. It is used for the precise cutting of solid materials, pipes, and profiles. Its robust design and continuously adjustable cutting speed make it suitable for use in both single-piece and series production. The machine has a working area of Ø 310 mm for round materials and 500 × 300 mm for flat materials. The cutting speed is adjustable between 20 and 140 m/min. A coolant system with a 60-liter capacity ensures good cooling and a long service life for the saw blade. The machine is powered by a 4.0 kW saw motor. The electrical connection is 400 V / 50 Hz, and the control system operates at 24 V DC. With a machine weight of 1,960 kg, the HBP 313N offers high stability and ensures precise machining of metal materials. Technical specifications: Saw blade dimensions 5,000 x 34 x 1.1 mm Working area Ø 310 mm / 500 × 300 mm Cutting speed 20–140 m/min Ksdjzq S Hnspfx Afwsna Coolant 60 l Belt tension 60 bar Saw motor 4.0 kW Connected load approx. 7 kW Mains connection 400 V, 50 Hz Control voltage 24 V DC Machine weight 1,960 kg Material support height 800 mm