Used Braun Ch6B-70 for sale (12,629)

Condition: good (used), Year of construction: 2017, Item: LC-10549 – Alfa Laval pump LKH70-110kW Alfa Laval LKH-70 Centrifugal Pump – 110 kW Used Alfa Laval LKH-70 sanitary centrifugal pump, suitable for high-capacity applications in the dairy, food, and beverage industries. The pump is equipped with a large Ø280 mm impeller and a powerful 110 kW motor. Technical data: Manufacturer: Alfa Laval Type: LKH-70 Year: 2017 Serial No.: 215309 Motor power: 110 kW Frequency: 50 Hz Impeller diameter: Ø280 mm Inlet: approx. DN100 Outlet: approx. DN80 Maximum flow according to Alfa Laval performance curve: up to approx. 260 m³/h, depending on the required head and product characteristics. CE marked Hygienic stainless-steel design Suitable for pumping milk, dairy products, water, and other low-viscosity food products. Original Alfa Laval performance curves are available. Nedpfjzymx Djx Abuslh Machine located in Denmark and available for sale.

Condition: used, Second-hand Braun Schleiffix set for sanding wood on table routers. Technical data: Nedpo Aa N Hzsfx Abuolh - Bore: 30 mm - Grinding width: 120 mm

Condition: good (used), Year of construction: 2002, I - beam section - flat steel 120 x 20 (d 750) mm I-beam section - upend 60 x 10 (d800) mm L-beam 50 x 5 (d 1200) mm bar material - diameter 35.0 (d 800) mm bar material dia. max. 70 x 3.0 (1200) mm 50.0 mm diameter of upper rolls 155 mm Nlodpfx Absz S U T Souoh diameter of lower rolls 155 mm Stroke length 150 mm Rotating speeds 9.0 U/min total power requirement 1.3 kW weight 305 kg range L-W-H 900 x 700 x 1500 mm Features: - Robust electric-motor-driven ring/profile bending machine - Machine base frame with rear storage shelf - Can be used in both horizontal and vertical orientations - Equipped with a wide variety of roller sets * Split roller segments * Pipe rollers - Electro-hydraulic feed of the upper roller - Manually adjustable side/alignment rollers - 1 freely movable control panel - Base frame with forklift pockets * For easy transport

Condition: refurbished (used), Year of construction: 2022, machine/vehicle number: R-00722, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in 2022.09. The robot comes with an R-30iB Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Nsdpfxoz Uyuyo Abuslh Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2022.09 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB Plus Year of Manufacture Cabinet: 2022.09 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: excellent (used), Year of construction: 1999, cross-wedge rolling machine It hot-rolls semi-finished products for shafts, pins, automotive parts, and agricultural blades. It can roll a shaft shape from a round bar in just a few seconds. Working diameter: cca 15 - 70 mm Working length do 400-600 mm Njdpfx Abo Ad I E Rsuelh Max. rolls diameter cca 700-800 mm Workpiece weight 1340 kg Machine weight cca 12.000 kg

Condition: good (used), Year of construction: 2000, I - beam section - flat steel 100 x 15 (d 400) mm I-beam section - upend 60 x 10 (d 500) mm L-beam 50x50x6,0 (d 600) mm round material 35.0 (d 500) mm bar material dia. max. 70 x 1.5 (d 1500) mm square material 50x50x3.0 (d 1400) mm bending speed 8.5 U/min roll diam. toproll 152 / 162 mm bore 40.0 mm Stroke length 120 mm voltage 400 V total power requirement 1.1 kW weight 470 kg range L-W-H 900 x 600 x 1100 mm Original price with accessories: approx. 10.000 euros Nljdpfx Aez S U Ucebujh Features: - Two driven rollers (lower rollers) - Manual feed of the upper roller - Horizontal and vertical working positions - Shafts mounted with tapered roller bearings - Lateral, manually adjustable stop rollers - 1 set of standard rollersâ??split - 1 sets of tube rollers - 1 freely movable control unit - Operating instructions

Condition: excellent (used), Year of construction: 2015, Arburg 270C 400-70 Year of manufacture: 11.2015 Injection unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Size of clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hardened injection unit - bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/width/height: 3.18x1.43x1.98 m All machines offered are started by our service technicians before sale. Nodpfx Abez Iqwqoujlh It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/480/70/15 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/480/70/15 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C For sale is a used Vötschtechnik ClimeEvent C/480/70/15 climate testing chamber in a water-cooled version. Suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development, aging, and stress tests. Temperature and humidity profiles, as well as automatic test programs, can be executed via the touchscreen control. Technical Data: Test Chamber Volume: approx. 480 liters Temperature Range: -72 °C to +180 °C Heating Rate: approx. 17 K/min Cooling Rate: approx. 15 K/min Max. Heat Compensation at +20 °C: approx. 8,000 W Climate Range: +10 °C to +95 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +94 °C Refrigerant: R449A / R23 Refrigerant Quantity: 4.00 kg / 2.30 kg Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 24 kW Rated Current: 43 A Cooling: Water-cooled version Cooling water inlet and outlet Connection for demineralized water Overflow and condensate drain Dimensions: External dimensions according to the installation plan (W × D × H): approx. 2,807 × 1,000 × 2,020 mm Transport dimensions with overhangs (L × W): approx. 2,857 × 1,115 mm Equipment: Touchscreen control / WEBPanel Program and manual test operation Temperature and humidity control Stainless steel interior Viewing window Test chamber lighting Shelves / Insert levels Side test chamber openings RS232, RS485 / RS422 and USB Status, alarm and maintenance display Program management and report function Transport Data: Transport dimensions: approx. 2,857 × 1,115 × 2,020 mm Weight according to series documentation: approx. 1,350 kg Shipping by freight forwarder possible Condition: Used Workshop inspected Optical condition as shown in the pictures. Scope of Delivery: Nedpfx Aoz Airfjbuelh Vötschtechnik ClimeEvent C/480/70/15 Shelves as shown in the pictures Available documentation / Operating manual Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat manufacturing, blind manufacturing -Profiling plant: Replacement stations for ID26309 -Profiling machine: heavy-duty design, used for manufacturing slats/blinds -bottom profiling stations: 5 pieces -Drive shaft: Ø 35mm -Dimensions: 4x 700/390/H400 mm 2x 300/200/H160 mm Nsdpfx Abjpvqy Deujlh -Weight: 702 kg

Condition: good (used), functionality: fully functional, actuation type: hydraulic, punching force: 70 t, punching diameter: 28 mm, throat depth: 500 mm, overall weight: 1,600 kg, Used hydraulic punching machine Brand: GEKA Model: HYD 70-SD Serial number: 3659 Throat: 500mm Nljdpfxeznh She Abush Cutting capacity: - L 90º: 130x130x13mm - Plate: 450x13mm - Round: 45mm - Square: 45mm - Notched: 250x250x6mm Maximum punching size: 28x20mm Tonnage: 70T Includes punches and dies as shown in the photographs. *Machine has been completely inspected and is in perfect working order.

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: R-00701, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in 2013.05. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Nedpfx Absz U Hztsuelh Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2013.05 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2013.05 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press Nodpfjpwnf Nsx Abuolh -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimensions: 1120/405/1310 mm -Weight: 312 kg

Condition: used, Year of construction: 2023, operating hours: 15,000 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Njdpfx Ajzp R Izobujlh terms of payment: 100% prior to delivery

Condition: used, machine/vehicle number: IC1566, Year of construction: 2018, operating hours: 6,186 h, load capacity: 2,500 kg, lifting height: 4,890 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, overall weight: 4,114 kg, Equipment: cabin, enginetype: LP Gas, manufacturer: Still Nedpe Afr Hnofx Abuelh Serial Number: 517307 J00004

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 2,400 h, load capacity: 2,500 kg, lifting height: 2,970 mm, free lift: 150 mm, fuel type: gas, mast type: duplex, construction height: 2,170 mm, gearing type: other, tire condition: 60 %, overall weight: 4,200 kg, Equipment: 4th hydraulic function, cabin, clamp, lighting, STILL RX 70-25T in very good condition with low operating hours. Equipment: Load capacity: 2,500 kg Standard lifting mast Lifting height: 2970 mm Free lift: 150 mm Overall height: 2170 mm Full cabin with heating Nlodpfez Rlv Iex Abujh Single-pedal control Additional hydraulics for 2 functions / 4 valves Kaup clamp fork 1.5T411 with an opening range of 550 mm - 1700 mm 3 LED work lights Superelastic tires The muffler was replaced in 2025. A test drive or inspection can be arranged at any time. Transport can be organized for an additional charge.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 2016/2017, total length: 2,500 mm, total height: 1,500 mm, total width: 1,800 mm, product height (max.): 360 mm, product length (max.): 1,000 mm, product width (max.): 500 mm, working height: 900 mm, width of welding knife: 700 mm, passage height: 360 mm, overall weight: 1,270 kg, passage width: 700 mm, table width: 700 mm, year of last overhaul: 2025, transport length: 2,500 mm, Equipment: documentation/manual, The packaging system with a welding tunnel has been in continuous use in and at the industrial laundry for 10 years. The system has been regularly maintained by the supplier, CLARUS AG. According to the technical specifications, the maximum output is 3,000 packages per hour. (We have produced an average of approximately 1,500 laundry packages per day.) The angle welding system will be replaced by a cluster welding system, as this technology is better suited for laundry packaging. The system will be taken out of service in mid-November. Nledpfx Abez Rvd Aeush

Condition: used, Year of construction: 2013, operating hours: 6,226 h, load capacity: 4,000 kg, lifting height: 5,500 mm, fuel type: diesel, construction height: 2,600 mm, gearing type: automatic, Equipment: cabin, head guard, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Still reach truck R-70-40 with triplex mast Year of manufacture: 2013 Operating hours: 6,226 Lifting height: 5,500 mm Mast height: 2,600 mm Next inspection: 08/2027 Transmission: 20 km/h VW engine, diesel/electric 55 kW / 75 hp 2 work lights at the rear 2 work lights at the top front + 2 in the middle 1 double-acting hydraulic cylinder at the front Load capacity: 4,000 kg Unladen weight: 6,421 kg Load center: 500 mm Turn signals Windshield wiper Fixed cabin with glass windows Tires: 250-15 (250/70-15), front approximately 50% remaining, rear approximately 40% remaining Tow hitch at the rear Price: €10,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale. Njdpfx Abjz Rkt Esujlh

Condition: excellent (used), punching pressure 70.0 t punch diameter 26.0 in 20.0 mm punch diameter 57.0 in 9.0 mm throat 305 mm round bar steel 45.0 mm square edge steel 45.0 x 45.0 L-beam 130 x 13 mm shear: flat material 300 x 20.0 / 375 x 15 mm blade length ca. 380 mm adjustment of stroke 0 - 55 mm strokes per minute 34 work height max. 1030 / 890 mm rectangle notching till max. 10.0 mm ST voltage 400 V total power requirement 5.5 kW weight 1620 kg dimensions 1700 x 1000 x 1800 mm Well-maintained condition (!!) Current new price ~ 20.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Equipped with multiple workstations: * Punching station * Flat bar shear Nlsdo Aa A Ilopfx Abuoh * Angle/profile steel shear * Notching station - Infinitely adjustable stroke length - Very compact design - Support table at the notching and punching stations - Lateral support surfaces - 2x mobile foot switches - Connection cable + plug Special accessories included: - Electric contact-actuated length stop

Condition: used, maximum load weight: 22,310 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 11/2003, next inspection (TÜV): 11/2026, loading space length: 13,530 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 89 m³, Year of construction: 2003, Equipment: ABS, 2-axle Schmitz Cargobull SKO 18 insulated box semi-trailer VIN: WSMS7160000454173 Chassis / Components: * Jost support legs * Air suspension / lifting and lowering * 2 x SAF axles with disc brakes * ABS / EBS * Tires: 385/65 R22.5 * Remaining tread: approx. 60-70% * 15-pin electrical connector * 2 x 7-pin electrical connector * 2-line compressed air connection * 1 x storage box * Spare wheel Body: * Schmitz insulated box * Closed box body * Rear roll-up door * L x W x H: 13.53 m x 2.49 m x 2.65 m * Cargo space: approx. 89 m³ * Load securing rails on both sides * Diamond-plate flooring in the rear area Weights: * Gross vehicle weight: 29,000 kg Nlodj Afa Exopfx Abueh * Unladen weight: 6,690 kg * Payload: 22,310 kg Other: * First registration: 11/14/2003 * MOT: 11/2026 * SP: We won't leave you alone even after the purchase: We will help you obtain export or short-term registration plates. Transporting your vehicle within Germany is also possible. Just contact us – we will be happy to help! We speak German, English and Russian. All information without guarantee. Subject to changes, errors, printing and spelling errors, and prior sale. ---About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sale of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. For us, it's not just about the vehicle, but also about the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably – from the first contact to the handover of your vehicle. See for yourself. We look forward to your inquiry! ---Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term registration plates We will help you obtain export or short-term registration plates. Customs formalities We will also be happy to assist you with customs matters. Vehicle transport If desired, we will organize the transport of your vehicle within Germany.

Condition: good (used), Code: 0499 Brand: COMAFER Model: DINAMIC 70/60 - CE Standard Hydraulic briquetting machine for compacting sawdust and wood shavings, for joinery workshops, furniture, bespoke furnishings, wooden joinery and other applications – CE Standard Technical data: The advantages of briquettes are: Nodpfx Abs Aaq Nkouolh Twice the calorific value of wood Almost no residue after combustion Much cleaner boilers Briquette diameter 65 mm Output 30/80 kg Pump motor 7,5 Hp Wood chip hopper diameter 1000 mm Overall dimensions mm 1100 x 1800 x 1650 h Weight kg 800

Condition: used, Year of construction: 2007, operating hours: 7,944 h, 2007 | Genie Z-135/70 | Used Articulated Boom Lift | 7944 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 50 inspection points 42 approved ✅ 7 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: The machine has a working height of 43.15 m. The secondary lift cylinder is leaking. The wheel alignment is incorrect. The axles require adjustment. The synchronization of the right rear wheel when steering is faulty. There is play at the level of the orientation turret and the boom pivot axes. The front tires show significant wear. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41312 Equippo" is commonly used when looking up more details online. Nlsdpfx Aboz Dx Uvsush 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: refurbished (used), Year of construction: 2014, machine/vehicle number: R-00529, load capacity: 70 kg, arm reach: 2,050 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-710iC/70 manufactured in 2014.04. The robot comes with an R-30iB A-Size controller including iPendant. Nlodpfx Abe Aa U Dxoujh   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/70 Model Number: A05B-1125-B202 Year of Manufacture Robot: 2014.04 Warranty term (months): 12   Payload (kg): 70 Reach (mm): 2050 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2014.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 750 mm, controller manufacturer: SIEMENS, controller model: SLIMline, overall weight: 7,800 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MU 70 ECO Mill was manufactured in 2015. It features a maximum spindle speed of 12,000 rpm and a robust integrated NC swivel rotary table. Weighing 7,800 kg, this machine is equipped with an external chip conveyor and a coolant/filtration tank unit. If you are looking to get high-quality machining capabilities, consider the DMG MU 70 ECO Mill vertical machining centre we have for sale. Contact us for further details. - Axis Travel: Standard ecoMill 70 specifications typically feature X = 750 mm, Y = 600 mm, Z = 520 mm- Maximum Spindle Speed: 12,000 max. 1/min (rpm)- Machine Weight: 7,800 kg- Apparent Power: 35 kVA- Maximum Current (In max): 55 A- Maximum Current (A max): 23 A- Short-Circuit Current: 63 A- Breaking Capacity: 0.6 kA- Operating Voltage: 400 V ±10% / 440 Vm- Auxiliary Voltage: 230 V ~ / 24 V =- Frequency: 50 Hz- Table Type: Integrated NC Swivel Rotary Table- Additional Equipment: External Chip Conveyor, Coolant / Filtration Tank Unit Nlodpfx Ajz A Urnjbuoh

Condition: used, Year of construction: 2021, operating hours: 210 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 345 kg, tank capacity: 75 l, total height: 1,060 mm, total width: 590 mm, total length: 1,310 mm, water tank capacity: 70 l, working range: 900 mm, The Kärcher BD 50/70 R Bp Pack Classic dates back to 2021 and has accumulated 210 operating hours to date. It has been completely overhauled and refurbished in our in-house workshop. During this process, each component was checked for its functionality and cleaned. A new, oil-resistant squeegee set and a new brush were installed. The machine also features a new suction turbine and a new drain hose. It is perfectly suited for medium-sized areas such as supermarkets, shopping centers, or hospitals. In addition, it can also be used for cleaning production and storage areas. Due to its narrow and compact design, the ride-on scrubber dryer is extremely easy to maneuver and transport – for example, also in elevators. Technical data: Nsdpfjzzn I Njx Abujlh Working width, brushes: 510 mm Working width, suction: 900 mm Tank volume, fresh/dirty water: 70/75 liters Theoretical area performance: 2,805 m²/h Practical area performance: 2,000 m²/h Maximum battery runtime: approx. 2.5 hours Permissible total weight: 345 kg

Condition: excellent (used), Year of construction: 2021, Pladdet PRG1-70-EX Sorting Grab | Quick-Coupler Mount | 70 Liters | 2021 | As New For sale is a hydraulic Pladdet sorting grab, model PRG1-70-EX. Equipped with a quick-coupler mount for attachment to an excavator. The grab is in as-new condition. Technical data: Manufacturer: Pladdet. Model: PRG1-70-EX. Year of manufacture: 2021. Serial number: PSG0100338. Capacity: 70 liters. Weight: 167 kg. Condition: as new. Hydraulic opening and closing. No rotation function. Quick-coupler mount. Hydraulic hoses and couplings included. CE marking. Inspection valid until 2027. Quick-coupler mount. Manufacturer: LSB Stahlbau Oschersleben. Suitable for: Terex TC48. Year of manufacture: 07-2026. Manufacturer number: 260621. = Further information = Year of manufacture: 2021 Suitable for: Construction machinery Technical condition: very good Optical condition: very good Njdpfx Ajz E Nkwsbuslh