Used C Type 100 Ton Eccentric Press Machine for sale (117,345)

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons Kodpfek S Htxox Agnolt In good condition

Condition: new, Year of construction: 2022, pressing force: 100 t, Estimated Equipment Weight 3500 Kg Equipment Dimensions (front x depth x height) (Ca. Aussenmasse) 1354 x 2005 x 2595 mm Table Dimensions (Useful Area) front x depth (Tischgroesse) Ø1050 mm Opening between table and hammer (Daylight) 350 mm Hammer stroke (Stoessel-Verfahrweg) 300 mm Drive power (Leistung in KW) 14,24 Kw Ksdohmi T Uepfx Agnolt Motor Rotation 1500,00 RPM Pump Flow 44,50 LPM Pump Motor Ratio 27,59 cm³/Rot Working Force (Zylinderleistung) 100,00 Ton Return Force (Rückzugskraft) 10 Ton Forward Speed 250 mm/s Working Speed with Pressure (Arbeitsgeschwindigkeit) 3~15 mm/s Return speed (Hebegeschwindigkeit) 150 mm/s Working Pressure (Maximaler Arbeitsdruck) 210,00 Bar Cylinder quantity 2 pc Stem Diameter 41,76 mm Cylinder Diameter 250,97 mm Cylinder stroke (Stoessel-Verfahrweg) 300,00 mm Reservoir Capacity (Volumen des Oeltanks) 350,00 Liters Extractor Cylinder 5,00 T Cylinder travel (Stoessel-Verfahrweg) 150,00 mm

Condition: new, Year of construction: 2023, Nominal press force of 1,000 kN Piston stroke, in steps adjustable 16 to 140 mm Tappet adjustment 90 mm Throat depth 295 mm Klsdpfxodulids Agnet Number of strokes in the idle 70 / min Mould installation height at Größthub down and adjustment up 420 mm *. Table clamping area (Wxd) 1,050 x 660 mm Plunger clamping area (Wxd) 640 x 460 mm Pin hole in the tappet 65 H 7 mm Power of main motor 7,5 kW Height of the machine 3,085 mm Weight of machine 8,500 kg, hydr. Overload protection, automatic slide adjustment, semi automatic stroke adjustment, latest UVV

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 80 t, stroke length: 600 mm, table width: 600 mm, table length: 800 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 80 Ton C-Frame Hydraulic Press – CHCP 80 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision in metal forming, deep drawing, cutting, and assembly operations. The CHCP 80 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, delivers reliable performance in medium and heavy-duty applications thanks to its robust frame, high capacity, and precise operating capability. Key Advantages - Rigid and vibration-free steel construction frame - High precision (≤120 microns/meter) - User-friendly PLC control system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long lifespan and low maintenance costs Fields of Application - Metal forming - Deep drawing and forming operations - Cutting and punching operations - Assembly and pressing tasks - Automotive and related industries Standard Features - Stress-relieved steel construction frame by vibration method Kljdjyzb Dtspfx Agnet - PLC control and touch panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances according to ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Two-hand operation control system - Cooling system Technical Specifications – CHCP 80 - Press Force: 80 Tons - Stroke: 600 mm - Throat Depth: 300 mm - Table – Ram Distance: 700 mm - Table Size: 600 x 800 mm - Press Depth: 1200 mm - Press Width: 600 mm - Table Height from Floor: 900 mm - Total Height: 2600 mm - Main Cylinder Diameter: Ø200 mm - Motor Power: 15 kW - Weight: 6500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 100 t, stroke length: 600 mm, table width: 650 mm, table length: 850 mm, throat depth: 300 mm, Equipment: CE marking, documentation/manual, safety light barrier, 100 Ton C-Frame Hydraulic Press – CHCP 100 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CRONOSSTECH CHCP 100 C-Frame Hydraulic Press is engineered for heavy-duty manufacturing applications, featuring high tonnage capacity, a robust steel frame, and precision operation. Key Advantages - Rigid, vibration-free steel frame construction - High precision (≤120 micron/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life with low maintenance cost Kledpfx Agsyzb Dysnet Applications - Metal forming - Deep drawing and stamping - Cutting and punching operations - Assembly and pressing applications - Automotive and supplier industry Standard Features - Steel frame stress relieved by vibration technique - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerances in accordance with ISO & DIN standards (≤120 micron/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical equipment - Automatic central lubrication system - Two-hand safety control system - Cooling system Technical Specifications – CHCP 100 Press Capacity: 100 Tons Stroke: 600 mm Throat Depth: 300 mm Table – Ram Distance: 700 mm Table Size: 650 x 850 mm Press Depth: 1300 mm Press Width: 650 mm Table Height from Floor: 900 mm Total Height: 2700 mm Main Cylinder Diameter: Ø220 mm Motor Power: 15 kW Weight: 8,500 kg General Information Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 5.5 kW (7.48 HP), pressing force: 40 t, stroke length: 500 mm, table width: 500 mm, table length: 600 mm, throat depth: 250 mm, Equipment: CE marking, documentation/manual, safety light barrier, 40 Ton C-Frame Hydraulic Press – CHCP 40 – New / 24-Month Warranty Hydraulic presses are industrial machines designed to deliver high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 40 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, offers reliable performance for both workshops and production lines with its compact design, robust frame, and precision operation capabilities. Key Advantages - Rigid, vibration-free frame construction - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - Hydraulic and electrical equipment compliant with European standards - Long service life and low maintenance cost Application Areas - Metal forming - Deep drawing and pressing operations - Cutting and punching operations Ksdpfxeyzb Dgo Agnolt - Assembly and press-fitting processes - Automotive and related industries Standard Features - Stress-relieved steel construction via vibration method - PLC control and touchscreen panel - Argon welding applications - EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) - Parallelism and perpendicularity tolerance per ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic centralized lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 40 - Press Force: 40 Tons - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 500 x 600 mm - Press Depth: 1050 mm - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2400 mm - Main Cylinder Diameter: Ø145 mm - Motor Power: 5.5 kW - Weight: 4500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 Months - Condition: Brand new and unused This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 200 t, stroke length: 800 mm, table width: 750 mm, table length: 1,000 mm, throat depth: 400 mm, Equipment: CE marking, documentation/manual, safety light barrier, 200 Ton C-Frame Hydraulic Press – CHCP 200 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 200 C-Frame Hydraulic Press, manufactured by CRONOSSTECH, is designed for demanding production conditions, offering a high tonnage capacity, reinforced heavy-duty body structure, and superior performance. Key Advantages - Heavy-duty, high-strength steel frame construction - Stable operation with vibration-relieved structure - High precision (≤120 microns/meter) - PLC-controlled, user-friendly system - PARKER / REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Long service life and low maintenance cost Application Areas - Heavy-duty metal forming - Deep drawing and stamping applications - High-tonnage die pressing - Cutting and punching operations - Automotive, defense, and heavy industry Standard Features - Stress-relieved, steel frame construction via vibration method - PLC control and touch panel - Argon welding applications - Certified welding in compliance with EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance in accordance with ISO & DIN standards (≤120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic centralized lubrication system - Two-hand control system - Cooling system Technical Specifications – CHCP 200 - Press Force: 200 Tons - Stroke: 800 mm - Throat Depth: 400 mm - Table – Ram Distance: 900 mm - Table Size: 750 x 1000 mm - Press Depth: 1500 mm - Press Width: 750 mm - Table Height from Floor: 1000 mm - Total Height: 2900 mm - Main Cylinder Diameter: Ø300 mm - Motor Power: 22 kW - Weight: 11,500 kg General Information - Country of Manufacture: Turkey - Warranty: 24 Months - Condition: New and unused Kjdpfx Aeyzb Edognelt This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 18.5 kW (25.15 HP), pressing force: 150 t, stroke length: 700 mm, table width: 700 mm, table length: 1,000 mm, throat depth: 350 mm, Equipment: CE marking, documentation/manual, safety light barrier, 150 Ton C-Frame Hydraulic Press – CHCP 150 – New / 24 Months Warranty Hydraulic presses are industrial machines that deliver high force and precision for metal forming, deep drawing, blanking, and assembly operations. Manufactured by CRONOSSTECH, the CHCP 150 C-Frame Hydraulic Press is engineered for heavy industry and continuous production applications with its high tonnage capacity, reinforced frame structure, and precise operation performance. Key Advantages: • High-strength, vibration-free steel frame construction • High precision (≤120 microns/meter) • User-friendly PLC-controlled system • PARKER / REXROTH hydraulic system • SIEMENS / SCHNEIDER electrical components • Heavy-duty design suitable for industrial use • Long service life and low maintenance costs Applications: • Heavy-duty metal forming • Deep drawing and spinning operations • Die pressing applications • Cutting and punching operations • Automotive and supply industries Standard Features: • Steel frame construction stress relieved by vibration method • PLC control and touch panel • Argon welding applications • EN ISO 15614-1 / 2017 certified welding (WPQR & WPS approved) • Parallelism and squareness tolerance compliant with ISO & DIN standards (≤120 microns/meter) • PARKER or REXROTH hydraulic system • SIEMENS / SCHNEIDER electrical components • Automatic central lubrication system • Two-hand safety control system • Cooling system Technical Specifications – CHCP 150 Press Force: 150 Tons Stroke: 700 mm Throat Depth: 350 mm Table – Ram Distance: 800 mm Table Size: 700 x 1000 mm Press Depth: 1400 mm Press Width: 700 mm Table Height from Floor: 950 mm Total Height: 2800 mm Main Cylinder Diameter: Ø250 mm Klodpfx Agsyzb D Hjnst Motor Power: 18.5 kW Weight: 10,500 kg General Information: Country of Manufacture: Turkey Warranty: 24 Months Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 60 t, stroke length: 500 mm, table width: 600 mm, table length: 800 mm, throat depth: 250 mm, Equipment: CE marking, documentation/manual, safety light barrier, 60 Ton C-Frame Hydraulic Press – CHCP 60 – New / 24-Month Warranty Hydraulic presses are industrial machines that provide high force and precision for metal forming, deep drawing, cutting, and assembly operations. The CHCP 60 C-Frame Hydraulic Press by CRONOSSTECH is designed for reliable and consistent performance in both workshops and production lines, thanks to its compact structure, robust frame, and precise operation capabilities. Key Advantages - Rigid and vibration-free frame construction - High accuracy (≤120 microns per meter) - User-friendly PLC-controlled system - European-standard hydraulic and electrical components - Long service life and low maintenance costs Applications - Metal forming - Deep drawing and flanging processes - Cutting and punching operations - Assembly and pressing applications - Automotive and supplier industries Standard Features Kodsyzb Dmspfx Agnolt - Stress-relieved welded steel construction with vibration methodology - PLC control and touch panel - Argon welding applications - Certified welding according to EN ISO 15614-1 / 2017 (WPQR & WPS approved) - Parallelism and perpendicularity tolerance in compliance with ISO & DIN standards (≤ 120 microns/meter) - PARKER or REXROTH hydraulic system - SIEMENS / SCHNEIDER electrical components - Automatic central lubrication system - Dual-hand control system - Cooling system Technical Specifications – CHCP 60 - Press Force: 60 Tons - Stroke: 500 mm - Throat Depth: 250 mm - Table – Ram Distance: 600 mm - Table Size: 600 x 800 mm - Press Depth: 1150 mm - Press Width: 500 mm - Table Height from Floor: 850 mm - Total Height: 2500 mm - Main Cylinder Diameter: Ø175 mm - Motor Power: 7.5 kW - Weight: 5,500 kg General Information - Place of Manufacture: Turkey - Warranty: 24 months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 160 t, stroke length: 200 mm, table width: 750 mm, table length: 1,100 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frame design. Klsdsx N Sbljpfx Agnot The CRONOSSTECH CEHP-TB-160 – H-Type Eccentric Press 160 Ton is engineered for stable performance in high-volume production, with a focus on die protection and operator safety. Featuring a monoblock frame, 8-point guided slide system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suited to continuous production conditions. Key Advantages - Stable and repeatable production with a 1100×750 mm table size - Die/equipment protection with hydraulic overload safety - Controlled, user-friendly operation via PLC and touchscreen display - Enhanced operator safety with light curtain safeguarding - Low maintenance requirements thanks to automatic lubrication Applications - Punching / cutting / forming with dies - Series production with automated feeding lines - High-volume manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • T-slotted auxiliary platen • 8-point guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Fully automatic micro-lubrication system • PLC control system • Grand piano-style control panel • Touchscreen LCD display • Motor reverse function • Hydraulic overload safety device • Motorized slide adjustment mechanism • Light curtain safety system • Enclosed gear unit in oil reservoir • Dual-coil safety valve • CE compliant ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover in front of the table • Custom die options ✅ TECHNICAL DATA (CEHP-TB-160) Capacity: 160 Ton Table–Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 120 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4600 mm Table Size: 1100×750 mm Ram Face Size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 22 kW Weight: 18,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Türkiye. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, retraction force: 40 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Flanging) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and flanging operations. The 8-side guided H-frame structure guarantees maximum rigidity throughout the pressing cycle, maintaining stable parallelism and perpendicularity tolerances over the entire stroke. The CHSP 100/40 model features a 100-ton main ram and a 40-ton cushion ram (blankholder), specifically designed for precision deep drawing and flanging operations. The frame construction is stress-relieved by vibration to ensure long service life and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 sliding guides - Vibration stress-relieved frame structure - Bronze Zr14 slide bearings - WPQR and WPS certified welding procedures accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, H-frame body with 8 sliding guides - Frame Material: St52 – ERDEMİR grade - Slide Bearing: Bronze Zr14 Kedpfx Aox N T Uyjgnslt - Capacity (Ram): 100 Tons - Capacity (Cushion/Blankholder): 40 Tons - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 600 mm - Stroke (Cushion): 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration stress-relieving - Welding: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1:2017 (certified welding coordination engineers supervise per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/sec - Moving Table Flanging Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø230 mm – Ck45 - Cushion Cylinder Bore: Ø140 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 3400 mm - Approximate Width: 2950 mm - Approximate Depth: 2000 mm - Distance from Floor to Lower Table: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 500 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guideway H-frame design, they provide high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and carrier components are stress-relieved by vibration. The bronze Zr14 material used in slide bearings ensures long service life and stable operation. Highlighted Advantages - 8-guideway H-frame design - Vibration stress-relieved steel construction - Welding applications in accordance with ISO standards - PLC control with touchscreen interface - Operator safety and process stability oriented design ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK accredited WPQR & WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guideway H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Tonnes Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/mtr Perpendicularity Tolerance: 60 micron/mtr Ram Stroke: 500 mm Min. Clearance: 100 mm Max. Clearance: 600 mm Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified welding process accredited by TÜRK-AK (certified welding supervised by engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Kodsx N Tx Sspfx Agnjlt Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Height of Press: 3400 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2000 mm Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tonnes Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,200 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and stamping, powered through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structure. CRONOSSTECH CEHP-TB-250 – H-Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance under continuous production conditions. Key Advantages: - Stable operation with large dies enabled by the 1200×1000 mm table size - Die/equipment protection via hydraulic overload protection - Controlled and user-friendly operation with PLC + touch screen - High operator safety with light curtain (photoelectric guard) - Low maintenance requirement thanks to automatic lubrication system Application Areas: - Punching / cutting / stamping operations - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balanced piston in ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric guard) • Enclosed gear group in lubricating oil bath • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems Kedpfjx N Sc Aox Agnelt • Scrap ejection systems • Sliding safety door in front of the bed • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table–ram distance: 500 mm Clearance between columns: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimensions: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are handled directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, retraction force: 100 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, RONOSSTECH CHSP 300/100 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description Kodex N Uhbjpfx Agnjlt The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses have been developed with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The H-frame structure with 8 guideways provides maximum rigidity during pressing; parallelism and perpendicularity tolerances are stably maintained throughout the long stroke. The CHSP 300/100 model, featuring a 300-ton main ram and a 100-ton bottom cushion ram (pot), is specially designed for deep drawing and spinning operations requiring high tonnage. The frame construction is stress-relieved using vibration methods for long life and reliable performance. ⚙️ Standard Equipment - Steel construction, H-frame with 8 guideways - Vibration stress-relieved frame - Bronze Zr14 slide bearings - WPQR and WPS certified welding applications accredited by TURK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacture in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable stroke control for both ram and cushion (pot) - Adjustable tonnage (pressure) control for ram and cushion (pot) - Automatic lubrication system - Electronic filter contamination alert - Display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHSP 300/100 - Type: Steel construction, H-frame with 8 guideways - Body Material: St52 – ERDEMİR - Slideway Bearings: Bronze Zr14 - Capacity (Ram): 300 Ton - Capacity (Cushion): 100 Ton - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Clearance: 100 mm - Max. Clearance: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS certified by TURK-AK EN ISO 15614-1:2017 (Welding applications are supervised by "welding coordination engineers" certified as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Movable Table Fast Down Speed: 150 mm/s - Movable Table Spinning Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Cushion Table Forward Speed: 30 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 - Cushion Cylinder Bore: Ø230 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Height: 4400 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1350 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switching Components: SIEMENS – SCHNEIDER - Approximate Weight: 21 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,200 mm, warranty duration: 24 months, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, operated by force generated via an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process reliability thanks to their rigid frames. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. Its monobloc frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure deliver reliable performance suited for continuous production environments. Key Advantages - Stable operation with large dies, thanks to the 1200×1000 mm table size - Die and equipment protection via hydraulic overload safety - Controlled and user-friendly operation via PLC and touch screen - Enhanced operator safety with a light curtain system - Low maintenance requirement with automatic lubrication system Areas of Application - Punching / cutting / die forming applications - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame • Pneumatic clutch and brake • T-slot additional mounting plate • 8-point ram guidance • Adjustable stroke on single connecting rod • Ram counterbalance cylinder • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch LCD display • Motor reverse • Hydraulic overload protection • Motorized ram adjustment • Light curtain safety system • Enclosed oil reservoir with gear set • Dual coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover at table front • Custom die specifications ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-200) Capacity: 200 tons Table-to-ram distance: 500 mm Housing width: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimension: 1200×1000 mm Ram face size: 1200×1000 mm Fixed stroke: 200 mm Motor power: 30 kW Weight: 24,000 kg ✅ PRODUCTION / SUPPLY NOTE Ksdpox N Sccofx Agnslt This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 125 t, stroke length: 200 mm, table width: 750 mm, table length: 1,100 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical presses used in cold forming operations such as punching, cutting, and die forming, operating with force generated via an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process security thanks to their rigid frame design. The CRONOSSTECH CEHP-TB-125 – 125 Ton H Type Eccentric Press is designed for stable operation in high-volume production, with a focus on die protection and operator safety. With a monoblock body, 8-point slide guide system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production environments. Key Advantages - Stable and repeatable production with 1100×750 mm table size - Die/equipment protection with hydraulic overload safeguard - Controlled and user-friendly operation via PLC + touchscreen interface - High operator safety with light curtain protection - Low maintenance requirement with automatic lubrication system Applications - Punching/cutting/forming operations - Serial production with automatic feeding lines - High-volume manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • Additional T-slotted plate • 8-point slide guide • Adjustable stroke on single connecting rod • Balancer piston on the ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety sensor • Enclosed gear group in oil reservoir • Dual-coil safety valve • CE conformity Kledpfx Agsx N R U Rsnot ✅ OPTIONAL FEATURES • Press feeding systems • Scrap disposal systems • Sliding safety cover at the table front • Custom die specifications ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-125) Capacity: 125 Ton Table-Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 100 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4500 mm Table Size: 1100×750 mm Ram Face Size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 18.5 kW Weight: 14,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 800 mm, table width: 1,000 mm, table length: 1,000 mm, clearance between the columns: 1,000 mm, retraction force: 100 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 300 / 100 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 300 / 100 ton four-column hydraulic deep drawing press is a high-rigidity, four-column hydraulic press solution developed for metal forming, deep drawing, and precision pressing applications. Its St52 grade steel frame undergoes stress-relieving via vibration, ensuring stable parallelism and perpendicularity tolerances throughout the full stroke. The ram and bolster systems operate independently; stroke length and tonnage settings can be precisely controlled via the touch panel interface. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and PLC-controlled structure, the machine provides high efficiency and reliable operation. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With a 300 / 100 ton capacity, this model is an ideal industrial press solution for medium to high tonnage metal forming, deep drawing, and die applications. Key Advantages - High-rigidity four-column press frame - Independent stroke and tonnage adjustment for ram and bolster - Full control via touch panel - High precision and repeatability - Long lifespan, low maintenance design Fields of Application - Metal forming applications - Deep drawing operations - Die testing and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 300 Ton CAPACITY (BOLSTER): 100 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 800 mm STROKE (BOLSTER): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 900 mm WELDING STRESS RELIEF: Vibration stress relief WELDING PRACTICE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 30 kW – IE3 MAIN PUMP: 45 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT SPEED: 150 mm/s FORMING SPEED: 12 mm/s RETURN SPEED: 170 mm/s BOLSTER TABLE FORWARD SPEED: 30 mm/s Kledpfex N Unzex Agnst MAIN CYLINDER BORE: Ø 390 mm – Ck45 BOLSTER CYLINDER BORE: Ø 230 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 Units APPROX. PRESS DIMENSIONS: 4000 × 1450 × 1450 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1300 mm FRONT CHARGE VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 18 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,400 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, driven by force produced through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety due to their rigid frame structures. The CRONOSSTECH CEHP-TB-300 – H Type Eccentric Press 300 Ton, is designed for high-volume production with a focus on stable operation, die protection, and operator safety. Featuring a monoblock frame, 8-point guided ram system, hydraulic overload protection, and an automatic lubrication infrastructure, it delivers reliable performance suited to continuous production environments. Key Advantages • Stable operation for large dies with 1400×1000 mm table size • Die/equipment protection with hydraulic overload safety • Controlled and user-friendly operation via PLC with touch screen • High operator safety with light curtain protection • Low maintenance needs thanks to automatic lubrication infrastructure Applications • Punching / cutting / die forming operations • Mass production with automatic feeding lines • Heavy-duty die and high-tonnage production processes Standard Features • Steel construction frame • Pneumatic clutch & brake • T-slotted supplementary plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation Kljdpfxex N Sdms Agnot • Hydraulic overload safety • Motorized ram adjustment mechanism • Light curtain protection • Gear group in closed oil reservoir • Double solenoid safety valve • CE compliance Optional Features • Press feeding systems • Scrap discharge systems • Sliding safety cover at table front • Dies as per custom specifications Technical Specifications (CEHP-TB-300) • Capacity: 300 Ton • Table-to-ram distance: 500 mm • Housing width: 1430 mm • Ram adjustment: 120 mm • Press width: 3100 mm • Press depth: 2550 mm • Press height: 4700 mm • Table size: 1400×1000 mm • Ram face size: 1400×1000 mm • Stroke (fixed): 200 mm • Motor power: 45 kW • Weight: 35,000 kg Production / Supply Note This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 1,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long service life. The CHP 1000 model has been developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered with heavy-duty industrial conditions in mind. The frame and main carrier constructions are stress-relieved by vibration. Thanks to bronze Zr14 slide bushings, even load distribution and high precision are achieved throughout ram movement. ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Vibrationally stress-relieved frame structure - Bronze Zr14 slide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1000 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Movable Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Vibration stress relief - Welding: TÜRK-AK accredited WPQR and WPS certified EN ISO 15614-1/2017 welding applications - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6000 mm - Approximate Press Width: 3450 mm - Approximate Press Depth: 2400 mm - Height of Lower Table from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER Kodpfox N T Rbex Agnjlt - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 600 mm, table width: 800 mm, table length: 800 mm, clearance between the columns: 800 mm, retraction force: 40 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH 100/40 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial press solution designed for metal forming, deep drawing, and precision pressing applications, featuring a rigid four-column body construction. The St52 grade steel frame is stress-relieved via vibration methods, ensuring long-term retention of high parallelism and squareness tolerances. The ram and bolster systems operate independently, with stroke and pressure settings precisely controlled via a touchscreen interface. Equipped with REXROTH or PARKER hydraulic components, IE3 class motor, and PLC-controlled systems, it provides high efficiency, reliability, and extended service life. The automatic lubrication system and electronic filter contamination alerts keep maintenance requirements to a minimum. This model is the ideal solution for medium-scale mass production, die testing, and precision forming applications. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and bolster - Full control via touchscreen panel - High precision and repeatability - Low maintenance costs, long service life Areas of Application - Metal forming operations - Deep drawing applications - Die testing and prototype production - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 Ton CAPACITY (BOLSTER): 40 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m SQUARENESS TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (BOLSTER): 200 mm MIN. DAYLIGHT: 100 mm MAX. DAYLIGHT: 700 mm Kodpfxsx N Ulyj Agnslt WELDING STRESS RELIEF: Vibration stress relieving WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE FORMING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s BOLSTER TABLE ADVANCE SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 230 mm – Ck45 BOLSTER CYLINDER BORE: Ø 145 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROX. PRESS HEIGHT: 3,500 mm APPROX. PRESS WIDTH: 1,150 mm APPROX. PRESS DEPTH: 1,150 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1,200 mm PRE-FILL VALVE: NG 100 HYDRAULIC POWER UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) RAM / BOLSTER STROKE AND TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION ENCODER: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 7.5 Ton Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, retraction force: 350 t, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHSP 1000/350 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description Kljdpfxjx N Uils Agnet The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting (ram + blank holder) system architecture for high-tonnage sheet metal forming, deep drawing, and spinning applications. Thanks to its 8-guide H-frame structure, high rigidity is ensured during pressing operations, and parallelism and perpendicularity tolerances are consistently maintained even with large bed dimensions. The CHSP 1000/350 model, featuring a 1000-ton main ram and 350-ton blank holder capacity, is specifically designed for deep drawing processes requiring controlled material flow—ideal for applications in automotive, white goods, defense, and heavy industries. The welded steel construction, stress-relieved by vibration, guarantees long-term, reliable operation. ⚙️ Standard Equipment • Welded steel construction, 8-guide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding, TÜRK-AK accredited (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and blank holder (pot) stroke control • Adjustable ram and blank holder (pot) tonnage (pressure) control • Automatic lubrication system • Electronically monitored filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and cooling system • SIEMENS – SCHNEIDER electrical components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Welded steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 1000 tons Capacity (Blank Holder): 350 tons Moving/Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Blank Holder Cylinder: Ø370 mm – Ck45 Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 Kodpfx Agjv Hchlsnelt X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH DRYMIX 100 is a fully automatic dry type concrete plant without a mixer. Concrete components are transferred directly into the transit mixer after weighing, without any mixing process. This feature provides a significant advantage, especially in projects where concrete needs to be transported over long distances. DRYMIX 100 offers high efficiency and durability thanks to its fixed, non-mobile structure, and can be used safely in many regions of the world due to its adaptable design for different climatic conditions. This model can be integrated with cement silos with capacities ranging from 50 to 500 tons. When supplied in cement bags, it is easily transferred to silos thanks to the blasting bunker and silo filling systems. In plants used in cold regions, the system is heated with hot steam generators and insulated panels, while in hot climates, concrete temperature is maintained at the ideal level with cooling units. Furthermore, aggregate pre-feeding systems eliminate the need for a feeding ramp, saving space on site. The user-friendly automation system is supported by top-class SIEMENS and SCHNEIDER brand electronic components. The PLC control system manages the production process fully automatically and ensures maximum accuracy with high-precision weighing systems. DryMix-100 Dry Type Concrete Plant Technical Specifications Production Capacity: 100 m³/h Weight: 33 tons (excluding cement silo) Total Motor Power: 70 kW Electric Generator Requirement: 200 kVA Required Operating Area: 700 m² Aggregate Storage Bunker: 4 x 25 m³ Aggregate Weighing Bunker: 3 m³ Klodpfxexqg A Re Agnjt Aggregate Weighing Belt: 1000 x 11,100 mm Aggregate Transfer Belt: 1000 x 10,800 mm Cement Weighing Bunker: 1,200 kg Water Weighing Bin: 600 liters Additive Weighing Bin: 50 liters Air Compressor: 500 liters, 5.5 kW Cement Silo: Capacity options ranging from 50 to 500 tons Control Type: Fully Automatic Why Choose the DRYMIX 100 Concrete Batch Plant? CONSTMACH DRYMIX 100 is the most suitable solution for long-distance concrete transportation requirements. Its mixerless structure, low maintenance cost, and high production capacity increase operational efficiency. Thanks to its structure that can be adapted to all weather conditions, it offers the same quality whether in the freezing cold of Siberia or the scorching heat of the Middle East. Its advanced automation system ensures maximum accuracy with minimal human intervention. At CONSTMACH, we offer a reliable investment with world-class engineering quality, a fast service network, and spare parts supply. By choosing DRYMIX 100, you can add long-lasting, efficient, and high-performance production power to your projects. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Kljdpfeu Dxb Tox Agnot Optionally with disc winder and straightener.

Condition: new, Year of construction: 2026, machine/vehicle number: 26.04.21, functionality: fully functional, Fresan FP 100P - C Frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Power: 100 tons (1000kN) * Strokes Per minute: 60 (variable) * Ram-Table Distance: 445 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) Ksdpfxjnxh T Rj Agnjlt * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine