Used Deburring Machine Fladder Gyro 300 Vac for sale (70,578)

Condition: used, Offered is a continuous-feed deburring machine with brush rollers and a separate extraction and dust separation system. Equipped with conveyor belt, brushing units, manual adjustment handwheels, feed rate controller, control panel and emergency stop switch. Inspection possible by appointment. Kdedpfe Aba Sdsx Acpeu

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Kdsdpfx Aewbh Dyjcpju Fintec 128 Tube finishing machine for sale Can be viewed under power with your steel tubes

Condition: used, functionality: fully functional, Deburring machine, edge milling machine Reishauer KE 3786 - Support table 250x250 mm Kdodsz Rwkkjpfx Acpeu - Motor UE 80/40 - Speeds 12,000 / 17,000 / 20,000 rpm - Milling cutter shank Ø6 mm - 9 milling cutters, including 4 with thrust bearings - Swiss made

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 630 mm, total length: 2,450 mm, total width: 1,120 mm, total height: 2,250 mm, overall weight: 1,800 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, passage width: 630 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 630 mm, workpiece length (max.): 3,000 mm, Equipment: documentation/manual, Sheet metal deburring and edge rounding machine MTP620 – NEW, IN STOCK, with filter-ventilator The MTP620 is a heavy-duty machine for deburring, edge rounding and surface finishing of sheet metal and laser- or plasma-cut parts. A belt grinding unit combined with rotating deburring brushes removes burrs, slag and sharp edges in a single pass. The machine is supplied with an integrated filter-ventilator (vacuum fan) for dust extraction. KEY FEATURES • Belt grinding unit plus rotating deburring brushes • Integrated filter-ventilator (vacuum fan 11 kW) • DELTA PLC control with touchscreen • DELTA electronic measurement of workpiece thickness • Variable-frequency feed speed 0–15 m/min • Variable-frequency brush spindle speed 0–1000 rpm • Motorised platform height adjustment • Low noise level < 68 dB TECHNICAL DATA • Working width: up to 630 mm • Workpiece thickness: 0.3–100 mm • Workpiece length: 50–3000 mm • Belt grinding motor: 7.5 kW • Deburring brush motors: 2 × 2.2 kW Kdedpsz Rv I Usfx Acpju • Platform lifting motor: 0.75 kW • Conveyor motor: 1.1 kW (frequency inverter) • Vacuum fan: 11 kW • Working air pressure: 0.4–0.6 MPa • Sanding belt size: 630 × 2000 mm • Supply voltage: 400 V, 3-phase, 50 Hz • Machine dimensions: 2450 × 1120 × 2250 mm • Weight: 1800 kg CONDITION & AVAILABILITY: NEW machine, year 2026. IN STOCK – available immediately. STANDARD EQUIPMENT • Filter-ventilator unit (dust filter with 11 kW high-pressure vacuum fan, silencer and extraction ducting) included with the machine – ready to connect APPLICATIONS • Deburring and edge rounding of laser-, plasma- and punched sheet metal parts • Removal of slag, burrs and sharp edges from cut contours • Surface finishing and grinding of flat parts up to 100 mm thick • Suitable for sheet metal workshops, laser cutting services and metal fabrication plants TERMS: Price net, EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination available for an additional fee – delivery quote on contact.

Condition: used, Year of construction: 2015, workpiece length beliebig mm work piece width 1500 mm Sanding height max. 100 mm speeds of grinding spindle 400-1600 stufenl. U/min feed stepless 1 - 5 m/min rated capacity 4 x 2,2 KW Dust suction hood 200 mm total power requirement ca. 9 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,9 x 2,4 x 1,9 m Deburring and chamfering system for stamped and laser-cut parts. The Discmaster 4Td is equipped with two large deburring discs and two chamfering discs, which oscillate multiple times over the entire workpiece.|This unique technology enables cost-effective chamfering of stamped and laser-cut parts and offers significant advantages over conventional machines. Machine: 2 disc units on the infeed side, Ã? 250 mm, 2.2 kW drive, separate height adjustment - 2 disc units on the outfeed side, Ã? 250 mm, 2.2 kW drive, separate height adjustment - Transverse oscillation of the disc units perpendicular to the feed direction, 2.2 kW gearmotor - Robust linear guide for oscillation - Enclosed machine housing - 4 spring-loaded, rubber-coated hold-down rollers - Conveyor belt feed - Constant table height (passage height) - Pneumatically controlled conveyor belt centering - Guidance of the entire grinding unit via 4 heavy-duty round guides and trapezoidal lead screws | - Strip brush for conveyor belt cleaning - Includes stepless speed control for the cutting units - Includes cleaning brushes, rotating, Ã? 120 mm, width 1500 mm - Overfeed protection flap for workpieces that are too thick Kdjdpfez I Ucdex Acpsu - Motorized workpiece thickness adjustment For small parts starting at 20 x 20 mm up to material widths of 1500 mm

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. Kedpfov Tnfisx Acpsdu The machine is available for inspection and testing; it is live. Please contact us with any questions.

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, nominal power: 6 kW (8.16 HP), workpiece height (max.): 120 mm, workpiece width (max.): 780 mm, Q-Fin Topgrinder Year of manufacture: 2017 Maximum part width: 780 mm Part length: unlimited 2 stations for grinding or deburring, rotatable Manually guided grinding plates Mobile machine on rollers Benchtop grinding machine for deburring, grinding, and rounding the edges of sheet metal parts. Integrated vacuum pump for fixing the sheet metal parts to the machine table. Also suitable for small parts and long sheet metal strips. The side and front panels are magnetically held and can be folded down if required. Kdjdpfx Ajz Nxmqocpsu Ergonomic operation via buttons on the handle. Used, in very good condition, with numerous accessories.

Condition: good (used), Year of construction: 1991, Fladder SC 300 / 1000 Finishing and Brushing Machine Year of manufacture: 1991 Manufacturer: Fladder System Denmark Serial number: 560 Machine height: 2210 mm Machine width incl. carousel: 4000 mm Machine length incl. carousel: 4500 mm Kdedpjkwcxyefx Acpsu Working height carousel: 800 mm Working width: 1200 mm Max. workpiece height: 100 mm Feed speed: 0.3 - 10.0 m/min lock-itTM spindles and length: 6 x Ø100 x 350 mm Voltage: 3 x 400/500V - 50/60Hz Max./Min. fuse rating: 32 A Max. power consumption: 15 kW Extraction rate: 2500 m3/h Net weight: 1700 kg

Year of construction: 2003, condition: used, Technical details: Kjdsu Ngc Nopfx Acpedu workpiece length: 130 - 2000 mm diameter min.: Ø 10 mm diameter max.: Ø 60 mm control: Fagor 10/102 S dimension machine xH: 3,8 x 3,8 x 1,9 m dimensions electric cabinet LxWxH: 1,2 x 0,6 x 2,2 m machine weight ab.: 4 500 kg Milling and deburring machine CNC of pipe ends or round steel on both sides. - Material feed via conveyor belt, travel distance approx. 3 300 mm. - Brush unit type PGAS 8/100 V-HV both sides/opposite, speed 10 000 rpm. (drive via compressed air) - Cutter holder, both sides/opposite - milling spindle and brush holder arranged one behind the other - Operation via control panel on the switch cabinet Support: - 2 x, 1x movable and 1x fixed - Lateral displacement of the right support Length 1725 mm by hand - Working paths transverse=5 - 50 mm; longitudinal=5-50 mm - Working spindle = speed max. 320 rpm *

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good. Kedpfx Aoymaw Ujcpedu  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: used, Brush deburring machine, presumably BAUER Year of manufacture: approx. 1985 Brush diameter: 250 / 300 mm Brush width: 20–60 mm Speed: 1500 / 3000 rpm Power: approx. 2 / 3 kW Mains connection: 380 Volt, 50 Hz - with table base Required space (L x W x H): 700 x 600 x 1250 mm Weight: 120 kg In good condition Kdsdpfxjxrgupj Acpsu

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg total power requirement 4 kVA Kjdpfjzy Satex Acpedu weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function - Working Unit 2, brush function - dust collector - automatic mode

Condition: used, Year of construction: 2003, functionality: limited functionality, Milling machine Type: MEC 300 Year: 2002 Serial number: M0004/02 Control: Selca s3045 Kdodpfey Sp Nrsx Acpsu

Condition: used, Year of construction: 1995, Brush deburring machine with 2 different speeds, depending on material 1000 or 1500 rpm. Kdedpfxsz Hx Hks Acpeu

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. Kdjdpfszx Rz Hsx Acpou The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: good (used), Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible Kodpferw Daajx Acpodu -Dimensions: 800/800/H1210 mm -Weight: 110 kg

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 13600 € 261.12 € 1300 mm 150 mm 150 mm 250x350 mm Kjdpewiryhsfx Acpjdu 945 mm 0.75 kW 1400 mm 1000 mm 1450 mm 300 kg Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.

Year of construction: 2017, condition: used, Year 2017 Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale. Kedpfx Acez Ic Arspjdu

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Working height: variable from 0,5mm – 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm Kdsdpfxem Nlm De Acpou As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, work piece width max 145 x 150 mm band speed 1.0 - 8.0 m/min workpiece height max. 100 mm total power requirement ca. 5.5 kW weight of the machine ca. 900 kg. dimensions of the machine ca. 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel Kdsdozwxy Iopfx Acpou - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit for rounding the edges of laser-cut parts - Adjustable speed of the disc brushes - 1 brush rotates clockwise - 1 brush rotates counterclockwise - Brush diameter: 250 mm - Motor power: 2 x 1.1 kW INCLUDED CONVEYOR BELT - The conveyor belt is made of synthetic rubber - The belt has high adhesive strength to hold parts in place - The conveyor belt is oil- and spark-resistant - Transport speed: 1-8 m/min. INCLUDED VACUUM TABLE FOR SECURING SMALL PARTS - Installed as standard - Vacuum motor power: 2.2 kW - Minimum workpiece dimensions: 25 x 25 mm - Maximum workpiece dimensions: 145 x 150 mm GENERAL INFORMATION: - Mechanical measurement of workpiece thickness - Digital display of material thickness - Pressure rollers are spring-mounted - Fixed working height

Condition: used, functionality: fully functional, ECM deburring machine VMB brand, formerly Kenametal Kdodpfx Aezd Dwrscpsu Currently not installed, but I will handle its relocation to the warehouse 2 units available

Year of construction: 2017, condition: used, functionality: limited functionality, machine/vehicle number: 2017038, Technical characteristics: ⚙️ Core Specifications Attribute Value Technology: High-pressure water-jet deburring Max Pressure: Up to 1000 bar Materials Processed: Cast iron, aluminum, steel Machine Type: Rotary table or tunnel with step feed Automation: Robotic arm with programmable sequence: Staubli TX60 newly retrofitted!!! Nozzle Material: Long-life alloy Construction: AISI 304 stainless steel Workpiece Handling: Mechanical clamping on custom pallets Water Treatment: Integrated deoiling and filtration system 🧰 Features & Capabilities Deburring & Flushing: Removes loose burrs and embedded swarf, even in intersecting holes. Flexible Programming: Supports various part geometries and production volumes. Robotic Integration: Nozzles mounted on anthropomorphic robots for precision targeting. Ksdpfxoxx Nq To Acpjdu Modular Design: Configurable for different layouts and productivity goals. Eco-Friendly Operation: Water-based cleaning with extended bath life via filtration. Loading/unloading manual table: with the option of 2 work stations running in parallel, equipped with Poka Yoke devices. Machine status: WORKING – High pressure pump needs to be retrofitted to achieve 1000 Bar (currently 350 bar).

Condition: used, Year of construction: 2020, Timesavers Series 12 | 225 mm Deburring Machine | Year of Manufacture 2020 | 2 Disc Units We are selling a dry-running Timesavers Series 12 for processing small sheet metal parts. The machine was manufactured in 2020 and is equipped with two disc units and a feed conveyor. It is suitable for removing burrs from laser-, punched-, and waterjet-cut parts. According to the machine documentation, two flap discs with a 350 mm diameter are included in the scope of delivery. Machine Data Year of Manufacture: 2020 Kdjdpfxjz D U U Ss Acpsu Working Width: 225 mm Design: Dry Operation Units: 2 Disc Units Serial Number: G2561-01 The machine can be inspected by appointment. We will gladly provide further photos and information on the actual operating condition to interested parties. Price: €12,900 net, ex works Leopoldshöhe. Loading and transport are not included. If you are interested, please send us your contact details.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, total width: 1,500 mm, overall weight: 5,200 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 5 A, Equipment: documentation/manual, The ERNST Neptun EBB 1500 is a deburring machine for sheet metal processing, used to clean and round the edges of parts cut, punched, or burned with a laser. This machine enables the alternating processing of various materials, such as steel, aluminum, galvanized sheets, or materials coated with protective film, thanks to its flexible deburring roller and brush set. Main features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made of different materials without the need for constant replacement of abrasive elements. • Functionality: Uses a flexible roller for deburring and a set of brushes (steel or lamellar) for dulling or rounding edges. • Precision: Allows for achieving identical and uniform radii on the edges. • Ideal solution for: Companies that process various materials where edge finishing is required after cutting. Important information: The machine has different options. It can hold parts pneumatically or magnetically. Modules: E – Module with a deburring roller B – Stainless steel brush module – for dulling edges and removing oxides up to 6 mm Kodpfjz Spmtox Acpsdu B – Scotch/Vlies brush module – for rounding edges 0.1 – 0.4 mm and applying texture to the material surface. With this type of machine, material processing is done in a wet environment, so there is no need to retool or clean the machine, and it can work with various types of materials, such as aluminum, stainless steel, structural steel, etc., in continuous operation. The entire process takes place in a closed water system with the addition of a special emulsion, which ensures that neither the machine components nor the processed parts rust. From time to time, water needs to be replenished as it evaporates in the parts drying system and during filtration in a special filter within the machine.

Condition: used, Year of construction: 2003, Rausch Gratomat MS150/3-800 Multi-Spindle Deburring Machine Ksdpfez Stwvox Acpsdu 20-800mm workpiece diameter 150mm maximum vertcal working stroke 150mm maximum gear face width 1-8 modul range compatibility 4 number of grinding spindles 26,000rpm grinding spindle speed