Used Dreher Str 26/90 for sale (24,144)

Condition: new, sheet thickness: 3bending length: 1250upper roll diameter: 90sheet length: 1250 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Working Length: 1250 mm Maximum Thickness:Pre-bending: 2.5 mm Bending: 3.0 mm Yield Point: 240 N/mm² Number of Rolls: 3 Top Roll Diameter: 90 mm Minimum Bending Diameter: 130 mm Motor Power: 1.1 kW Machine Length: 1950 mm Height: 1130 mm Width: 900 mm Weight: 500 kg Options: - Back roll with motor EURO 825,-- Nlodpfx Aod Ab Tzshzsb - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 314,-- - Hardened rolls EURO 550,-- We have many references!

Condition: new, bending length: 1250sheet thickness: 3upper roll diameter: 90 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 314,-- - Hardened rolls EURO 550,-- - Variable speed of rotation  Nodpfsd Ab Tyjx Ahzolb We have many references!

Condition: used, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, Year of construction: 2024, Equipment: ABS, Total length without chute: 8801 mm Total length with chute: 8962 mm Internal length: 7410 mm Total width: 2550 mm Internal width: 2346 mm Internal height: 1515 mm Track gauge: 2040 mm Distance: Kingpin to 2nd axle: 4800 mm Rear overhang without chute: 1296 mm Rear overhang with chute: 1457 mm Ground height: 1464 mm Max. height with tipped body: 8272 mm Total weight: 36,000 kg Technical gross weight: 39,000 kg Axle load: 8,000 kg Njdpsutz Uyjfx Ahzelb Fifth wheel load: 12,000 kg Load volume: 26 m3 Manufacturer designation for homologation: NW-3 nd Unladen weight: 6376 kg The weight is specified with an accuracy of ±3% nd The manufacturer reserves the right to change the vehicle's technical specifications. Chassis Super Light chassis frame, straight, longitudinal members with recessed fifth wheel plate area. Welded construction, weight-optimized from high-strength S700 steel. Air suspension. Side impact protection made of aluminum profiles according to ECE 73. 2 plastic wheel chocks. Wheelbase 1310. Distance: kingpin on 2nd axle: 4800 mm. Steel underrun protection. Foldable underrun protection at the rear. Axles and suspension. 1200 mm fifth wheel height, unloaded. Number of axles: 3. Rigid axles. SAF disc axles, 3x9000 kg, 22.5 INTRADISC CD. 1st lift axle. Support legs. SAF Hercules 2-speed transmission supports, full load. Fenders. Full PVC fenders - 6 pieces. Rubber mud flaps with Wielton LOGO behind the third axle Wheels 6x steel rims 22.5-11.75 ET-120 wheel nut caps Tires 6x tires 385-65-22.5, manufacturer's choice Other chassis equipment Aluminum ladder L=2, 840 mm Shovel and broom on the chassis, above the fender Toolbox - 44 L (mounted at the front of the chassis, left side) Water tank 30 L (mounted in the middle of the chassis, left side) Body Volume 26 m3 Front wall tilted 20 degrees Steel hinged hatch Internal height 1515 mm Floor 4.5 mm, side walls 4.5 mm Hardox Lower tension locks - 2 pcs. Other body equipment Operating station on the chassis frame, access on the left in FR (Driver's side) Cover PVC roll-top tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube (for vertical rear end with front and rear extension triangles, center tube welded into the tarpaulin) PVC roll-top tarpaulin Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco 2S/2M braking system Chassis paint finish Chassis paint finish RAL 7021 (black-gray) Body paint finish All steel parts are blasted twice before painting. Body paint finish RAL 7001 (silver-gray) Tarpaint finish Tarpaint finish RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1 Electrics Full LED lighting LED reversing light - 1 pc. 2x7-pin 1x15-pin with EBS connection, without connecting cables to the tractor unit Full LED lighting Aspöck - ECOLED II with flashing side marker lights Additional systems Control cable for lift axle from the driver's cab Pre-assembled brake This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. Marking Reflective warning signs Partial contour marking with Wielton logo Partial contour marking on the side, white Partial contour marking on the rear, red Wielton warning sticker Warranty 24 months for the complete product fr

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 90 t, Equipment: CE marking, 1 Used Morgan Rushworth year 2019 2.6metre x 90ton Downstroke Cnc pressbrake for sale Model: PBS CNC 2600/90 Year: 2019 With modern ESA touch screen cnc control Nsdpfxeyziugs Ahzjlb 4axis in total - 2 axis back gauge Euro style tooling and tool holders Upper and Lower Tooling VIDEO AVAILABLE UPON REQUEST

Condition: used, axle configuration: 3 axles, first registration: 12/2002, color: grey, Year of construction: 2002, gearing type: other, LICENSE PLATE: AC22259 TITLE: ZORZI 26 R 070 19 A BALESTRATO HOOKLIFT TRAILER REF: 21R09 YEAR: 2002 AXLES: 3 WHEELBASE: 3800 mm MAXIMUM LENGTH: 9.205 m ORIGIN: Italian PAYLOAD: 21,650 kg - TRAILER GVW: 26,000 kg fully loaded BODY TYPE: Hooklift BODY MANUFACTURER: BTE ADR: No BODY MOUNTING LENGTH: FROM: 5.00 m + 0.20 m TO: 7.30 m + 0.20 m SUSPENSION: Leaf Spring BRAKES: Drum brakes TYRES: 265/70 R19.5 ACCESSORIES: Nodpfxsuznrco Ahzolb - 4 external hydraulic locks - Locking device with tractor hydraulic hoses REFURBISHED: No INSPECTED: 12/10/2022 TYRE CONDITION: 60% Prices shown do not include VAT. Please contact the sales department for up-to-date price and condition comparisons. For more information: Loris: 3484773001 URL: #thespecialistsofhooklifts AURORA HOOKLIFTS operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in waste management sector. Specialists in trucks, trailers, and hooklift equipment. With an available stock of over 50 trucks and more than 150 hooklift bins and containers, with or without cranes, ready for delivery. E&O.E Given the quantity of listings and details provided, Aurora invites customers to verify all information with the sales staff.

Condition: new, power: 235 kW (319.51 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), Iveco 180E32K, Wheelbase: 3,690 mm, New vehicle, unregistered. 2 years factory warranty from initial registration. Color: White, code 50105 IC 194. 9-speed gearbox, Euro 6. Ready for immediate delivery. The following accessories are included: - 00015 – Rear axle ratio 5.29 - 00131 – Differential lock - 00166 – Rear tubular underrun protection - 00541 – Battery disconnect switch - 08289 – Pre-installation for toll system - 05899 – Right driver's seat armrest - 00640 – Manually tiltable roof - 07747 – Dirt-resistant, easy-to-clean interior - 00553 – Headlight protection grille - 02085 – 24-volt trailer socket - 00430 – Trailer version for towing - 05210 – ZF Power Take-Off (PTO) - 06319 – 360 ccm air compressor - 06403 – Tipper version - 00219 – Two wheel chocks - 00568 – 143 Ah batteries - 00590 – Seat belts - 00632 – Sun visor - 00693 – Electric windows - 01483 – PTO pre-installation - 02096 – Heated air dryer - 02181 – Central engine exhaust - 02211 – Warning triangle - 02463 – Cruise control - 02650 – Manually adjustable air conditioning - 02662 – Anti-spray mud flaps - 02688 – Heat-insulating glass - 02714 – Electrically adjustable and heated mirrors - 06150 – Rear crossmember D-value 100 kN - 02912 – LDWS (Lane Departure Warning System) - 02289 – Heated fuel filter - 04572 – Expansion module - 05456 – Mirrors for 2,500 mm bodywork - 05534 – First aid kit - 06555 – Fog lights - 06620 – Comfort driver's seat - 06629 – Headrest - 06617 – Double passenger seat - 06891 – Immobilizer - 07440 – Weight limits kg 7,500–12,000 Nlsdeyx N Iuopfx Ahzjb - 75181 – Reversing alarm - 08277 – Heated AdBlue tank - 08297 – EVSC (Electronic Stability Control) - 75056 – LED daytime running lights - 01395 – Bluetooth radio - 75499 – 200-liter fuel tank - 05267 – 30-liter AdBlue tank - 75502 – Air filter unit on right rear of cab - 77023 – EBS (Electronic Braking System) - 06314 – 70A alternator - 06318 – 225 ccm air compressor - 20790 – 315/80 R 22.5 tires - 07700 – Jack - 02443 – Leather steering wheel with controls - 00191 – Radiator protection - 00160 – Iron bumper - 00744 – Rear window behind the cab - 02210 – Spare wheel - 08554 – Rear axle with semi-elliptical spring suspension, trapezoidal springs - 08551 – Front axle with semi-elliptical spring suspension, trapezoidal springs Emails will not be answered. If interested, please call us. Sale to business customers or export only. Subject to prior sale and errors.

Condition: new, empty load weight: 825 kg, maximum load weight: 1,775 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 1,900 mm, loading space volume: 8.6 m³, color: silver, construction height: 2,510 mm, working width: 2,070 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, with doors, refrigeration unit = Arktik 1600 N, sandwich walls, * IMMEDIATELY AVAILABLE * with DOORS, refrigeration unit = Arktik 1600 N, sandwich walls Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,600 kg - Unladen weight: 825 kg - Payload: 1,775 kg - Interior dimensions: 300 x 150 x 190 cm (L x W x H) - Overall exterior dimensions: 441 x 207 x 251 cm (LxWxH) - Loading sill height: 55 cm - Tyres: 185/65 R14 steel rim - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - Incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Walls: Thermo sandwich body 40mm - Roof material: Thermo sandwich body 40mm - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional retrofitting in lashing rail - Rear door: yes - Tailgate: no - Tailgate material: Thermo sandwich 40mm - Tailgate/door function: Refrigerated compartment press lever lock - Clearance dimension rear door/flap: - - Interior light: optional - Supports: yes 4 pieces - Overrun device & brake: yes, Alko - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Overrun device from ALKO - Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door retainer - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - 1800 watt cooling capacity at a cold storage temperature of +6 C and an ambient temperature of 30 C - Temperature control range from +2 C to +10 C - Evaporator air flow rate 750 m2 - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing light plug - reversing lights - large safety lighting - integrated rear fog light - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Nljdpfeu Hrvcex Ahzob

Condition: new, empty load weight: 860 kg, maximum load weight: 1,740 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,530 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3617-26-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - Initial registration: without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 360 x 170 x 190 cm - External dimensions (LxWxH): 542 x 229 x 253 cm - Floor loading height: 53 cm - Perm. Total weight: 2,600 kg - Unladen weight: 860 kg - Payload: 1,740 kg - Chassis: Low loader (wheels next to the body) - Tires: 185/65R14 - Chassis: ALKO rubber suspension - Support wheel: Yes, automatic - 100km/h approval: Optional EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Wooden floor - Walls material: Sandwich (sheet steel/foam 40mm/sheet steel) - Roof material: Sandwich (sheet steel/foam 40mm/sheet steel) - Color: Grey - Number of pallet spaces: 6 - Tipping / lowering function: Without - Overrun device/brake: ALKO - Frame/chassis: Aluminium substructure - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, U-profile - Mudguards: Plastic mudguards - Side door: No - Cooling unit: GOVI Arktik 1600 N - Temp. Control range: +2 C to +10 C - Cooling capacity: 1800 W - Rear doors / tailgate: Rear doors - Locks for box body: Press lever lock - Drive-on angle: - - Supports: Yes - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Yes - Rear lighting: Incandescent bulbs, lamps recessed in rear frame - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum control of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reverse drive - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing light - Automatic reverse drive - Plastic mudguards - 13-pin plug - Large reversing light - Large reversing light - Large reversing light - Large reversing light Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar Nljdpfx Aou Hrvpohzob

Condition: good (used), crane block, crane hook, load hook, single hook -Crane hook: load hook with holder -Load capacity: kg -Dimensions: see photos -Dimensions: 490/160/H1090 mm -Own weight: 81 kg Nedpfxeu Richj Ahzolb

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm Nsdob A Sfvepfx Ahzelb -Piston rod: Ø 50 mm -Stroke: 260 mm - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg

Condition: ready for operation (used), Siemens SIMOREG 6RA2628-6DV57-0 compact unit D380/90 Mreq-GcG6V57-2E1 SN: Q6/919668, used, in good condition, 100% functional, scope of delivery as per photos. Nedpfex Dxd Hjx Ahzolb

Condition: used, Year of construction: 1970, functionality: fully functional, BARMAG extrusion system consisting of: 1x BARMAG BA KEP 90-26.3-S extruder 1x BARMAG 9E4-11-103/Z transmission gear 1x AEG G 16.04 drive motor with forced ventilation, 460V, 112A, 46.7KW, 3150rpm, rated at 330V, 2.21A 1x SCHOLZ dosing unit, incl. Feed hopper 1x Control unit System features: - Single-screw extruder, built around 1970 - Throughput 200 kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90 mm Nljdpfsuakzzox Ahzsb - Screw length 2769.5 mm - Process length 26.3D - Geometry: Feed - Barrier - Mixing section - Screw material: 1.8550, nitrided - DC motor - Technical documentation This system is available in three versions. Subject to prior sale. Please send inquiries via email only. Note: The machine is still installed and can be inspected on site. The buyer must dismantle it and arrange shipping themselves. This is not included in the offer price.

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard Nledpfx Ahsh Rdxnozob - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Year of construction: 2003, condition: used, Ami pallet transfer transfer roller conveyor chains 90° 1750-1397-1262-1100 RA2296 Nsdjtug S Dopfx Ahzslb Make: AMI Running direction: both directions Roller width (RB): 1080 mm / 1100 mm profile spacing Nominal/outer width (NB): 1262 mm Length: 1397 mm Diameter of rollers: 89 mm Frame height: 160 mm Roller spacing: 175 mm Chain transfer motor: SEW motor 300-500 V, 0.37 kW Lifter motor: SEW motor 300-500 V, 0.5 kW Roller conveyor motor: SEW motor 300-500 V, 0.37 kW Conveyor speed: 0.15 m/s Chain spacing: 450 mm total width: 950 mm Transfer length chained: 1750 mm Chain type: Double chain, mounted on plain bearings Scope of delivery: incl. supports, Height 500 mm (top edge of rollers) Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2024, condition: refurbished (used), Tube Straightener 6V1+1 90×5, made by CARTACCI Njdpfx Ahoyma Hvszelb Recently revamped Tube diameter size : 12 – 90 mm Wall thickness : 0,8 – 5 mm Tube length : 4 – 12 m Straightening force : 16 Mp Straightening precision : 0,5 mm/m Speed infinitely variable : 0 – 100 m/min Diameter: 12 – 90 mm Thickness: 0,8 – 5 mm Length: 4 – 12 m Straightening force: 16 Mp Straightening precision: 0,5 mm/m Speed: 100 m/min

Condition: used, Year of construction: 2005, Rolling curve 90° straight piece 830 mm Make: Transnorm Type: TS 2712 Year of construction: 2005 Project: N124592 Conveyor angle: 90° Width: 600 mm Outer width: 665 mm Inner radius: 800 mm Division of roles: straight piece 85 mm Curve 100 mm Speed.: 0.5 m/sec Njdpfx Aok Aa Nuehzelb Optional: 3 supports Shipping weight: 120 kg on euro pallet Transport dimensions: L x W x H = 2800 x 700 x 500 mm Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2006, Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus VAT from central warehouse Dr. Sonntag KG 97076 WÃ ¼ rzburg Payment: after invoicing with advance payment Njdpjk Aa Nijfx Ahzslb Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 1999, condition: excellent (used), functionality: fully functional, For sale here is a Foellmer OK 90 strip insertion unit - Subtramat - Machine is on castors - Weight: 35 kg - Height adjustable for low or high deliveries - Power connection: 230V - Coupled to the printing press via cable - Strip length: 10 cm, cutting time is adjustable Nedpfjgllp Hjx Ahzelb - Lance: 21 cm from the front edge of the machine - Lance height parallel to the ground approx. 70–140 cm (height can be easily adjusted using different tubes) - 5 rolls of insertion paper included

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Nodeyma Adopfx Ahzslb Length: 4 - 12 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn

Condition: used, Automatic packing machine Manufacturer : MAIR Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Nljdpfx Ahsvtp Hbszob Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Condition: ready for operation (used), Year of construction: 2017, operating hours: 342 h, travel distance X-axis: 255 mm, travel distance Y-axis: 252 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis Stratasys Objet260 Connex 3 was manufactured in 2017. It features PolyJet multi-material 3D printing technology and has a material capacity of 8 slots, including 6 model slots and 2 support slots. The machine is equipped with an external material cabinet and is certified with CE, FCC, and EAC markings. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys Objet260 Connex 3 machine we have for sale. Contact us for further details. • Technology: PolyJet Multi-material 3D printing • Power Rating 1: 100-120V~; 1PH; 50-60Hz; 13.5A • Power Rating 2: 200-240V~; 1PH; 50-60Hz; 7A • Short Circuit Rating: 1000A • Material Capacity: 8 slots (6 Model slots, 2 Support slots) Nlsdpfx Ahsy Sarwszob • Material Type: Objet Support and Model resins • Certification: CE, FCC, EAC marked Additional equipment • External material cabinet

Condition: used, maximum load weight: 1,905 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 04/2020, loading space width: 2,007 mm, total width: 2,382 mm, total height: 511 mm, A22 GW26D024902 Well-maintained car transport trailer gross vehicle weight 2,600 kg, wooden floor, 2.4m loading ramps, manual cable winch WAP 901, overrun brake, 100 km/h, LED lighting Nljdpfx Asyn Uchshzjb Vehicle not prepared Errors and prior sale excepted

Condition: refurbished (used), functionality: fully functional, total length: 2,772 mm, total height: 1,683 mm, total width: 2,027 mm, overall weight: 2,869 kg, iAM Marketplace – the official used machinery partner of Stratasys! Nedpfxjytckqs Ahzolb Several professionally refurbished Stratasys F900 3D printers are available immediately. Each machine undergoes comprehensive inspection according to strict guidelines, with all print-relevant components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to new equipment. The machines vary in year of manufacture, configuration, and operating hours. Detailed information regarding condition and price range is available upon request. The Stratasys F900 is an industrial large-format FDM 3D printer featuring a build volume of 914.4 x 609.6 x 914.4 mm. This machine is suitable for functional prototypes, end-use parts, and production tooling. It offers high precision, repeatable print results, and dependable production throughput. More than 25 materials can be processed.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 33234, Year of construction: 2013, Stratasys Objet 260 Connex – Professional 3D Printer For sale: Stratasys Objet 260 Connex 3D printer, year of manufacture 2013. The machine comes from a professional environment and is suitable for applications such as prototyping and product development. Nlsdpfx Ahjyag Imjzsb Optional accessories are negotiable. Further information available upon request.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Nlsdew Nygnjpfx Ahzob Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*