Used Eisele Lms 350 P for sale (45,189)

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fedpfx Apey Dtpmewegb Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Fjdpfx Apjyyxxfewsgb Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Year of construction: 2009, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Fgjdpfsywtqdox Apwob Material stop adjustable with detent points and display on the display Program control for automatic adjustment of the punch height, the angle, and the punching height Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: used, Year of construction: 2001, Hydropneumatic operation Profile height: 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Fedpfxsyu Rzto Apwogb Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 2009, Hydraulic operation Profile height up to 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Fgedpsyu Rw Iefx Apweb Abutment height: 150 mm Weight: approx. 450 kg

Year of construction: 1969, condition: good (used), machine/vehicle number: 1130, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm Fgedpsd Rxw Sjfx Apwjb cutting area at 90° square: 100 x 60 mm cutting speed: 17/34 m/min engine: 380 V, 1,8/2,6 kW space needed: 1200 x 860 x 1850 mm weight: 720 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1587 / 1588, saw blade diameter: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. Drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. The punching direction is vertical from above, with punching tool cassettes that can accommodate up to 8 profiles simultaneously. Material feed: The feed is controlled via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control system: Modern variants often use a Siemens S7 control with touch display for intuitive operation and precise programming. The machine is designed for continuous industrial operation and has the following physical characteristics: Fsdpjyyz Txofx Apwsgb Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment plan or individual financing models – together we will find the right solution. Upon request, we will also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don't have to worry about a thing. 📞 Please contact us for more information or a non-binding quote. We provide you with personal and knowledgeable advice. Subject to prior sale, changes and errors excepted!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display Fodoyyz Ebepfx Apwjgb - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors! Fedpfx Apsyyzxhjwegb

Condition: used, Year of construction: 1998, Hydropneumatic operation Profile height: 180 mm under hold-down Fgsdpfxeyrrddo Apweb Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 1995, Hydropneumatic operation Profile height: 180 mm under hold-down Fgsdpfxjyrrbvj Apwob Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Fgedpfxey Dcmbs Apwjb Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Fsdpfxsyz T A Us Apwjgb Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Notching width at 90°: 300 mm, profile height up to 280 mm Motorised height adjustment for notching, positioning with electronic digital display Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display

Condition: used, Year of construction: 2011, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Abutment height: 150 mm Weight: approx. 400 kg Fgedpfxeynalus Apwsb

Condition: used, Eisele VMS II-S-PV automatic saw with automatic feeder and piece counter Roller conveyors left and right Metal band saw, metal circular saw Fgodpfswf Af Tex Apwsb

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Fgedpfoyxr Dxox Apwsb Condition: Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame ——— Applications: • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) ——— Advantages: • Robust, professional construction • High cutting and spreading force • Proven HURST technology • Complete set – ready for immediate use

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Type of fastening: laterally to the shelf upright surface: sendz. galvanized Fgedpfx Aei Euzdepweb total length: 450 mm for shelf distance: approx. 350 mm profile dim.: U 62 x 30 mm Weight: 0,84 kg | pcs.

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Fedpfx Apow Inudowegb Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Year of construction: 2001, condition: used, Saw blade diameter vertical: 600 mm Fodpfx Asygkn Dspwegb Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min 0025 voltage 380 V Fgjdpfsvu Hlkox Apwjb clamping ja kW miter ja weight 700 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fully automatic operation Drive 7.5 kW, S6, 400 V, 50Hz, 2850 rpm For use with saw blades D 550 mm Cutting range 270x140 mm (width x height), D 185mm Max. profile width 270mm Control unit with display Including piece counter Including reversing device for a maximum cut length of 3000mm Automatic shut-off via limit switch when material ends Hydropneumatic saw blade feed, continuously adjustable, from bottom to top Vertical and horizontal clamping units, on both infeed and outfeed sides of the saw head Fgjdjyvtyvspfx Apwob Pneumatic dosing spray device Cutting gap extension on both sides of the saw blade Electronic material feed unit 3-600mm feed length, with ball screw spindle and servomotor Including pneumatic horizontal and vertical clamping device Remnant piece from 75mm, depending on profile 2 extraction ports D 100 mm Safety guard over the saw head and feed unit A suitable extraction system can also be offered!

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Fsdpovmz R Ssfx Apwogb Pneumatic material clamps coolant lubrication

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Fgsdpfx Apju Niuzoweb Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: good (used), Cyklos RPM 350 Plus Automatic Rotary Perforator Machine in very good condition, ready for production. Description: Automatic perforating device with a working width of 350 mm. Fgsdpfx Asyur Alspwjb Frictional sheet feed. Capable of producing 1-5 perforation lines per sheet. Feeder and output tray adapted to A3 and smaller formats. Easy to use. Option to upgrade with a creasing disc. Sheet counter. Adjustable feed speed from 70-130 sheets per minute. 230V power supply. Weight 20 kg. Made in the Czech Republic.

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 0783, Miter cold circular saw EISELE Fedpst A Ar Ssfx Apwegb Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.