Used Emcoturn E25 for sale (388)

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). Dodpfx Aoz Eiigjl Sjwc A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 80 V, total height: 625 mm, total length: 1,023 mm, total width: 849 mm, Tested forklift battery for your forklift - 80V 5PZS 625Ah - DIN A + 1 year warranty + Includes Aquamatik watering system + Includes terminal discharge leads & REMA 320 connector (other connectors can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,023 mm Width: 849 mm Height: 625 mm Weight: approx. 1,470 kg Suitable for the following models and more: Linde E25-336-00/Flat Linde E25/-L/-RL-387-00 Linde E25 S-1276-00 Linde E25 S-336-00 Linde E30-336-00/Flat Linde E30-387-00 Linde E30 L - 1252-01 Linde E30 L - 387-00 /side battery change Linde E30 RL - 387-00Sti Linde E30 S - 1276-00 Linde E30 S - 336-00 Linde E35 - 387-00 Linde E35 L - 1252-01 Linde E35 RL - 387-00 Daewoo B25X Still R60-25 Still RX60-30 Still RX60-35 Still RX60-40 Toyota 7FBMF20/25 Dedpfey Rnq Ejx Al Sswc Toyota 8FBMT25 Toyota 8FBMT35 Carer Z25HD Carer Z25KN Caterpillar EP30K Caterpillar ЕР30KРAC Daewoo B22/35 X-5 Daewoo B30 Daewoo B35 X Doosan B32X Doosan B35X-5 Hyster E2.50XM Other common battery sizes available on request. Shipping available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Dedpfjy Rnqfjx Al Sswc Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 700 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,028 mm, total width: 855 mm, Tested forklift battery for your forklift - 80V 5PZS 700AH - DIN A Dedjy Rnqrspfx Al Sjwc + 1 year warranty + incl. Aquamatic automatic water filling system + incl. end discharge cables & REMA 320 connector (other connector types can be installed upon request) + Capacity: min. 90-100% (a C5 capacity test report is provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,028 mm Width: 855 mm Height: 784 mm Weight: approx. 1,860 kg Compatible with the following models and more: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S-336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P-325-00 Linde E30 SH-1276-00 Linde E35/600H-388-00 Linde E35 H-/HL-387-00 Linde E35 P-337-00 Linde E35 RHL-387-00 Linde E35 SH-1276-00 Linde E40-337-00 Linde E40 C-388-00 Linde E40 P-337-00 Linde E45/600H-388-00 Linde K 12/15-148-00 Linde P250-127-00 Linde P250L-127-05 Jungheinrich EFG 430 Toyota 7FBMF30/35 Toyota 8FBMT25 Crown TSP 6000-C Crown TSP 7000 Caterpillar EP30K/FB35KPAC Daewoo B30-35X Daewoo B35X-7 Hyundai 50B-9 Mitsubishi FB25N UniCarriers QX 2-30 Other common battery sizes available upon request. Shipping available.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,558 h, load capacity: 2,500 kg, lifting height: 5,400 mm, fuel type: electric, mast type: simplex, construction height: 3,400 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Standard Technical condition: good Djdpfju Adbijx Al Sewc Sideshift, fork positioner, 3rd valve, 4th valve,

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 771 h, load capacity: 2,500 kg, lifting height: 5,060 mm, free lift: 1,595 mm, fuel type: electric, mast type: triplex, construction height: 2,258 mm, drive type: Elektro, Electric four-wheel forklift Mast type: Triplex Dwedpfxjz I Hzlj Al Sjc Condition: Ready for use and fully functional Technical condition: good Battery voltage: 80V Side shifter, 3rd hydraulic valve, 4th hydraulic valve, rear-view camera

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,670 h, load capacity: 2,500 kg, lifting height: 4,760 mm, free lift: 1,505 mm, fuel type: electric, mast type: triplex, construction height: 2,175 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery voltage: 80V Battery year of manufacture: 2021 Djdey Uf Ehspfx Al Sjwc Side shifter, 3rd hydraulic valve.

Year of construction: 1996, condition: ready for operation (used), Offered is a slant bed CNC lathe. Bar capacity: 65mm, travel X/Z: 160mm/510mm, control system: Siemens Sinumerik. Equipped with bar loading magazine. Weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 2800mm/1800mm/1900mm. Inspection possible by arrangement. Expected to be available starting February 2027. Dwedpfx Ajy Ulniol Ssc

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 7,791 h, load capacity: 2,500 kg, lifting height: 5,780 mm, free lift: 1,805 mm, fuel type: electric, mast type: triplex, construction height: 2,574 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Dodexu Su Tjpfx Al Sswc Battery voltage: 80V Battery year: 2018 Side shifter, heater, full cabin, air conditioning,

Condition: ready for operation (used), Year of construction: 1999, operating hours: 20,941 h, travel distance X-axis: 56 mm, travel distance Z-axis: 176 mm, number of axes: 2, Horizontal turning machine manufactured in 1999. This EMCO Emcoturn 325 features a 3-phase supply voltage of 400 V and a rated current of 9.5 A. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 325 machine we have for sale. Contact us for further details. • Supply voltage: 400 V • Phase: 3-phase (3/PE – three phases + protective earth) • Frequency: 50/60 Hz • Rated current (IM): 9.5 A • Maximum current (Imax): 18 A • Short-circuit current (Ik): 6 kA • Duty cycle: S6 – 40% Technical Specification Counter Spindle No Driven Tools No Dedpfxoy A Hw Uo Al Sjwc

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,209 h, load capacity: 2,500 kg, lifting height: 4,980 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Dwedpju Adaxefx Al Sec Sideshift, 3rd valve, half cabin,

Condition: used, mileage: 480,115 km, power: 185 kW (251.53 HP), first registration: 01/2010, fuel type: diesel, number of seats: 41, gearing type: mechanical, emission class: euro5, color: white, brakes: retarder, Year of construction: 2010, Equipment: ABS, parking heater,

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 24,049 h, load capacity: 2,500 kg, lifting height: 5,355 mm, free lift: 1,674 mm, fuel type: electric, mast type: triplex, construction height: 2,456 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Condition: Ready for use and fully functional Dodpfxjzf Tpao Al Sewc Technical Condition: Good Battery Voltage: 80V Sideshift, fork positioner, 3rd valve, 4th valve

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,995 h, load capacity: 2,500 kg, lifting height: 6,585 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Dwjdpjy A T Iyofx Al Ssc Mast type: Triplex Technical condition: good Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 60 - 80% Battery voltage: 80V Battery type: PzS Battery year: 2018 Description: The vehicle will undergo a UVV safety inspection. Prior to delivery, the machine will be serviced and cleaned. If requested, the machine can be repainted at extra cost. Sideshift, 3rd valve, 4th valve, rear work light, front work light,

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,253 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: electric, mast type: simplex, construction height: 2,325 mm, drive type: Elektro, Electric 4-wheel forklift Dwsdpjxux Efjfx Al Ssc ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for use and fully operational Technical condition: Good Description: No battery Sideshift, 3rd valve,

Condition: used, Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, clamping force: 2,450 kN, screw diameter: 50 mm, clearance between the columns: 610 mm, total length: 6,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 12,000 kg, power: 48 kW (65.26 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 68 A, We offer this used WOOJIN PLAIMM TE250 injection molding machine, manufactured in 2020. Dwedpezwupxofx Al Soc Serial number: 2002501597 Model: TE250 Clamping force: 2450 kN Screw diameter: 50 mm Injection unit: IE780 Electrical power: 48 kW Motor rated current: 50 A Rated current at full load: 68 A Control voltage: 400 V Frequency: 50 Hz Dimensions (L×W×H): 6.7 × 1.7 × 2.0 m Weight: 12 t Date of manufacture: 2020.12.21 If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2015, Machine: Barida ICE 2500 Bottle neck freezer Dwodez Ibkzjpfx Al Soc

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,674 h, load capacity: 2,500 kg, lifting height: 4,530 mm, fuel type: electric, mast type: simplex, construction height: 2,925 mm, drive type: Elektro, Electric 4-wheel forklift Dedpfxjx N Dmgj Al Sjwc ISO class: ISO class 3 = 2,500 – 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 80V Sideshift, 3rd valve, 4th valve, full cabin,

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Dsdpezw Ucxsfx Al Sjwc Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Dwedpozw Ug Rjfx Al Sjc Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: used, functionality: limited functionality, Year of construction: 2016, operating hours: 6,702 h, load capacity: 2,500 kg, lifting height: 3,530 mm, fuel type: electric, mast type: simplex, construction height: 2,425 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Dwjdpezuh Dqsfx Al Soc Condition: Not operational Technical condition: poor Description: Damaged suspension, no battery 3rd valve, 4th valve,

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm 8-station turret Dodszb R Igopfx Al Sowc Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Various tool holders

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 9,771 h, load capacity: 2,500 kg, lifting height: 3,200 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,500 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Dwedjvla D Uopfx Al Sjc ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: Good Front tires Type: Non Marking Front tires Condition: 20 - 40% Rear tires Type: Non Marking Rear tires Condition: 0 - 20% Description: The vehicle is UVV - checked. The machine is serviced and cleaned before delivery. On request, the machine can be painted for an additional charge. Load protection grille, 3rd valve, 4th valve, rear work lights, front work lights, windshield,

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 9,402 h, load capacity: 2,500 kg, lifting height: 4,250 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 2,080 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,190 kg, total length: 2,400 mm, drive type: Elektro, construction width: 1,150 mm, Electric four-wheel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: Impulse Technical condition: good Front tire type: Superelastic Front tire size: 2 x 23x9-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 18x7-8 Rear tire condition: 20 - 40% Battery voltage: 80V Battery capacity: 625Ah Battery year of manufacture: 2014 Dsdpfxjz Ifvbj Al Sswc Additional single hydraulic circuit, integrated side shifter, half cab, full free lift, impulse control, battery from 2014.

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials Dwsdpfx Aoz Eg Awol Sjc