Used Emod 90/S2 for sale (14,302)

Condition: new, Fastech 3-Roll Round Bending Machine FRS-S 2050 x 190 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment motorized lower roll adjustment 2 x digital display Sheet metal width 2050 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness for pre-bending 6.0 mm Roll length 2050 mm Roll diameter 190 mm Smallest bending diameter 285 mm Weight 2,695 kg Itsdpfxohzq D Us Ah Dek Dimensions L-W-H 3600 x 1100 x 1200 mm Motor: 4 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, roller diameter: 190 mm, - Capacity 2070 x 7 mm Itjdpfen Ryfwox Ah Dok - Electrically adjustable rear roller - Electrically adjustable lower roller (material clamp) - Digital display for rear roller movement - Digital display for lower roller movement (material clamp) - Hardened rollers - Tapered rollers - Swing-down upper roller - Brake motor - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 1992, Used overhauled Compressor Siad Low and High-pressure System for 1850 CBM: Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022, like new and ready for delivery. Machine has 1850 m3/h of power. Complete replacement of the Baty and replacement of bands, bearings, gaskets, valves. ATLAS Copco ZR4 screw overhaul with replacement of air filter, oil filter and vapor filter, ACS Z oil, shuttle KIT, intake KIT, exhaust silencer filter, flexible coupling replacement, greasing of engine bearings and general compressor control. The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need. The machinery is guaranteed a 12-month or 2000-hour warranty on all replaced components. Only HP / LP tank and dryer need to be added. The two machines, Booster equipment and LP compressor Atlas, were purchased by the same company where they increased its compression power. Rental and short-term rental hypotheses of this Booster equipment can also be considered, with all transport and installation costs borne by the customer. The machines are now available immediately in one of our warehouses, and can be inspected, but it is not possible to start them for obvious reasons of power requirements at start-up. We have a team of technicians specialized in high and low-pressure compressors who can overhaul any unit of the major international brands such as SIAD, A&F, ATLAS COPCO, ABC and many others. Our team is at your disposal to evaluate any overhaul option of your old compressors, and in case of interest one of our employees can contact you to receive all the information necessary to make a first estimate online and possibly schedule a visit to you. It is possible, depending on our stock availability, to arrange a short-term rental during the overhaul time of your old compressor. Maintenance Performed Big end bearing half (1 bearing per connecting rod) Shoulder rings in 2/2 Half (connecting rod) Crank shaft grinding Baty Oil Filter (Succhiarola) Shirt (n 3) Piston rings + oil scraper bands (crosshead) Oil pump filter cartridges Roller bearings Ijdpfxjvgurce Ah Detk Full soft seal (Of phalanx and labyrinth seal) Baty hatch gasket Visual oil warning light Lantern door seals Flywheel Belts 1,2,3 phase cylinders: Piston rod (1,2,3 phase) Sealing rings and relative sealing pack plugs Piston rings + shoes (1,2,3 phase) Complete valve overhaul Head gasket (1,2,3 phase) Valve seat gaskets (1,2,3 phase) Various spare parts: Air filter Various O-rings Security valves Solenoid valve Various bolts

Condition: used, type S2-900 / 190 DKGM In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery Itedpfxsx Ik Tke Ah Dsk if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 1 x G. Mondini S.p.a. inline heat sealing machine fitted with ICE Zodiac thermal transfer overprinter. Supplied with User Manual, Electrical Diagrams, 4 x sets of tooling with arms for different sized punnets and 1 x tool trolley. Manufacturer – G. Mondini S.p.a. Model – SF 90. Serial number – 3713/09-1. Date of manufacture – 2009. Tooling set 1 - Infia K62, 4 x 1 format, square punnets 163mm long x 163mm wide (approx). Tooling set 2 - Proseal SPL, 2 x 1 format, 270mm long x 174mm wide (approx). Tooling set 3 - T1478X PS48213, 5 x 1 format, 174mm long x 132mm wide (approx). Tooling set 4 - details TBC. Iedpfsy Hl E Sjx Ah Detk Overall dimensions - 4220mm long x 900mm wide x 2150mm high. Tooling trolley dimensions - 1300mm long x 750mm wide x 1750mm high.

Condition: used, maximum load weight: 11,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: tail-lift, 2-AXLE DRACO FRIGO TRAILER, CARRIER TRS ICELAND, 24 CC, TAIL LIFT (2021) Box: Cool/Freeze/Flowers Frigo Martini Ebo Rhoon Make and type of chassis: Draco MZS 218 Refrigeration: Carrier TRS Iceland First registration: APK: ? 2025 FRC ATP: No Inside dimensions (lxbxh): 750 x 250 x 290 cm Drawbar adjustable length: 40 cm Empty weight: 6,090 kg Loading capacity: 11,910 kg GVW: 18,000 kg Lift: Dhollandia 2,000 kg lift Suspension: Air suspension Axles: SAF axles with disc brakes Tyre size: 445/45 R19.5 Tyre tread depth axle 1: L30%, R30% Tyre tread depth axle 2: L30%, R30% Spare tyre trailer 445/45 30% Extras: Length-adjustable drawbar (40 cm), Carrier TRS Iceland refrigeration, Dhollandia 2,000 kg lift (Year of manufacture 2021!!), ABS, EBS, SAF axles with disc brakes, 2 toolboxes, Fully insulated box built by Martini, 5x stainless steel rails in floor and ceiling, 1x horizontal load securing rail, extra lights, rear doors, rear bumper, ferry connections, 2x spare tyres, complete service history available, directly available and ready for work. The box is large enough for 24 CC (Danish trolleys), 14 standard pallets, or 18 Euro pallets, etc. Further information: * Type | Front axle: Continental * Tyre size | Front axle: 445/45 R19.5 * Tyre tread depth inside left | Front axle: 20% * Tyre tread depth inside right | Front axle: 20% * Maximum axle load | Front axle: 9,000 kg * Type | Rear axle: Continental * Tyre size | Rear axle: 445/45 R19.5 * Tyre tread depth inside left | Rear axle: 40% * Tyre tread depth inside right | Rear axle: 40% * Maximum axle load | Rear axle: 9,000 kg * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Load capacity: 2,000 kg * Price on request: Yes * Position | Front axle: Rear * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Air suspension * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Tail lift | Type: Tilting and sliding tail lift Further equipment: Ijdpfx Aoztlkrsh Djtk * Rear doors * Homepage * SemCollection Semtrade B.V. Contact: Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs: Please inquire in advance about the costs and procedures for your respective country. Location: Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 90 t, Equipment: CE marking, 1 Used Morgan Rushworth year 2019 2.6metre x 90ton Downstroke Cnc pressbrake for sale Model: PBS CNC 2600/90 Year: 2019 With modern ESA touch screen cnc control 4axis in total - 2 axis back gauge Itsdpsyziugsfx Ah Dek Euro style tooling and tool holders Upper and Lower Tooling VIDEO AVAILABLE UPON REQUEST

Year of construction: 2018, condition: new, functionality: unexamined, – For removing foreign matter from municipal and industrial sludge and from process water – Continuous screening, dewatering, and discharge of foreign matter in a single operation - Compressor for compressed air generation - Electrical technology, Strainpress control and switchgear panel Process data: - Sludge type: digestate from wet anaerobic digestion of biowaste Isdpfx Ajyvhr Hsh Detk - Sludge quantity: expected 8–10 m³/h - Solids content in feed (average/max): 4–6% DS (dry solids) - Screen/slot size for preliminary screening: 12 mm Performance data: - Number of machines: 1 (1 in operation/0 standby) - Throughput per machine: expected 8–10 m³/h - Solid throughput per machine: 4–6% DS

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Iedpfozux Elox Ah Dotk Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Distance Between Centres: 1500mm Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Motor: 11KW Machine With: 300mm 3 Jaw Chuck 600mm Face Plate Digital Readout Quick Change Toolpost with Holders Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Condition: used, maximum load weight: 11,910 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, loading space length: 7,500 mm, loading space width: 2,500 mm, loading space height: 2,900 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: tail-lift, Further information: * Unladen weight: 6,090 kg * Tyre size | Front axle: 445/45 R19.5 * Tread depth inner left | Front axle: 40% * Tread depth inner right | Front axle: 40% * Maximum axle load | Front axle: 9,000 kg * Tyre size | Second axle: 445/45 R19.5 * Tread depth inner left | Second axle: 40% * Tread depth inner right | Second axle: 40% * Maximum axle load | Second axle: 9,000 kg * Tail lift | Manufacturer: DHOLLANDIA * Tail lift | Lifting capacity: 2,000 kg * Price on request: Yes * Position | Front axle: Rear * Brake type | Front axle: Disc brakes * Suspension | Front axle: Air suspension * Position | Second axle: Rear * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Tail lift | Type: Tuck-away and slide tail lift Additional features: * Rear doors * Homepage * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Isdpfx Aoynxbbsh Djtk Subject to change, prior sale and errors excepted

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, *Description:* For sale: motorized 3-roller rolling machine *SAY-MAK SRM 1550 x 90* *Technical specifications:* - *Year*: 2019 - Serial number: 59860 - *Capacity*: 2mm steel / 1.5mm stainless steel, with a width of 1550mm - *Minimum diameter*: 90mm - *Motorized*: Yes, with forward/reverse foot pedal - *Controls*: Control box with emergency stop + digital display - *Weight*: 580kg - *Voltage*: 380V, three-phase - *Condition*: Very good condition, well-maintained 2019 machine Perfect machine for sheet metal work, ventilation, and metal fabrication. Isdpfxjzr Rdue Ah Dstk Reputable Turkish brand, spare parts available.

Condition: used, maximum load weight: 28,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2026, Year of construction: 2026, Equipment: ABS, Legras SBS 2220 Moving Floor Trailer 90 m³ * SAF axles * 90 m³ loading volume Isdpoyfzicjfx Ah Dstk * Disc brakes * Lift axle on the first axle * Air suspension * Pneumatic control * Load pressure gauge * Rolling tarpaulin * Side safety tarpaulin * Folding fender for lighting system * LED lights * ADR-approved wiring * Maintenance hatch front left * ABS connector * 2 x 7-pin power sockets * ISO air couplings with red and yellow coupling heads * Toolbox * Access ladder and platform on front wall * Double-wing rear door * Maintenance hatch front left Interim sale and errors excepted! Sale only under our General Terms and Conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some may be caused by transmission errors within the systems of different platform providers. Therefore, we expressly point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer according to §145 of the German Civil Code (BGB), but rather serves as information for contract initiation. All information provided is without guarantee and does not constitute warranted characteristics.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Itodpozupzqefx Ah Dek Max Width of material cutting 455mm BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: used, Year of construction: 1990, machine/vehicle number: 90-10-175, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, saw blade diameter: 450 mm, height adjustment type: mechanical, actuation type: manual, Equipment: saw blade guard, Altendorf table saw, model F-90, as shown in the photo. Year of manufacture: 1990. The saw is being sold because it has been replaced by a new one. It is still in perfect working order. It will be transported on a wooden pallet and can be loaded onto a truck using a forklift on site. Itjdpfx Aszq Srqoh Djk Sold as is, no warranty.

Condition: good (used), Year of construction: 2016, operating hours: 601 h, mast type: telescopic, fuel type: hybrid, color: white, Drive: Wheel Working height: 2.900 cm CE mark: yes Technical condition: good Itedpfx Ahjtxxqwj Dok Visual appearance: good Delivery terms: EXW Max. horizontal reach: 1400 m Production country: DK Please contact Vink Machinery for more information Falcon Spider FS290 * 2016 •⁠⁠601 working hours •⁠ ⁠Diesel and batteries •⁠⁠29 meters working height •⁠⁠14 meters horizontal range * 4 Meter negative •⁠ ⁠Adjustable wheels •⁠⁠200 kg lifting capacity •⁠ ⁠Stamp machine •⁠ ⁠Remote control •⁠ ⁠4070 kg own weight •⁠ ⁠Including documents

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Isdpfx Ajb A Nmdoh Detk -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Quantity: 1 motor available with left-hand thread -Price: per piece -Weight: 20 kg/piece

Condition: used, volt / V Ijdpfx Aoy S Dpmsh Dotk ampere / A weight / kg total power requirement / kW

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,840 kg, maximum load weight: 21,160 kg, overall weight: 26,000 kg, axle configuration: 2 axles, loading space length: 12,050 mm, loading space width: 2,550 mm, total length: 12,200 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, transport company Fine-grained steel welded construction, turntable with replaceable 2" kingpin, reinforced mounting point for "gallows" attachment, and with sturdy wear plates all around, attachment rail for aluminum ramps at the rear Outer frame slightly inclined, new design with "Load-Lock profile" for securing lashing straps, "patented Load-Lock cross" for securing lashing straps, in the cross member under the outer frame, 24-ton, two-speed support winch, single-sided operation, with straight lower part, without stroke compensation, free support foot angle or free swivel radius to the rear approx. 1920 mm, without supports, 2 shims with holder, aluminum side impact protection, steel under-run protection, quarter panel fenders in front of and behind each axle, without bull bar, spare wheel holder for 1 spare wheel, with wheel fastening kit, spare wheel, manufacturer same as standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock Axles + Suspension Drum brake axles, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, without steering, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded line routing for easy maintenance, spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve, vehicle stability system Wheels and tires 205/65 R17.5, manufacturer's choice for 8-ton axle load at 80 km/h, steel rims, factory silver Itedpfjzb Ikfjx Ah Dok Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, LED work lights in a curved design (switched via reversing light), if technically possible, additional LED work light at the rear, switched via reversing light Floor Sieve-printed panels approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5600 kg Front wall / front corner posts 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in full volume design Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: refurbished (used), functionality: fully functional, total length: 1,650 mm, total width: 1,900 mm, total height: 1,300 mm, warranty duration: 12 months, input voltage: 400 V, power: 34 kW (46.23 HP), input current: 70 A, input frequency: 50 Hz, Cutter K+G Wetter – 90 liters, set with emptying device Power supply: 400 V, 3 phases, 50 Hz Power: 34 kW Current: 70 A Material: stainless steel Itedszunwqepfx Ah Djk Volume: 90 liters Dimensions: 1300 mm x 1900 mm x 1650 mm The machine is available after a complete factory refurbishment with a 1-year full warranty included in the price

Condition: excellent (used), Year of construction: 2014, operating hours: 602 h, functionality: fully functional, machine/vehicle number: 638554, overall weight: 1,092 kg, load capacity: 90 kg, arm reach: 3,096 mm, This is a KUKA KR 90 R3100 extra industrial robot with KRC4 controller, manufactured in 2014. Itjdpfx Aszk Hf Seh Djk We would be happy to offer this robot as a fully refurbished unit! The controller includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 648, functionality: fully functional, operating hours: 347 h, power: 6.8 kW (9.25 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 5 mm, total length: 4,000 mm, overall weight: 600 kg, For sale is a well-maintained Lange B90KF edgebanding machine. The machine is fully operational and remains connected for testing. Includes extensive accessories and basic materials. Equipment and technical data: - Glue pot - Pressure zone - Pre-milling unit - Edge feed - Saw unit - Milling unit - Scraper blades Itodpfx Ahjyuvk Ho Dok Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0 / 5.0 mm Electrical connection: 400V, 50 Hz, 3-phase Total power: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Weight: approx. 600 kg A video of a recently produced demo workpiece can be sent via WhatsApp on request. All information without guarantee. Price is net plus VAT. An invoice for the machine will be issued.

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Itjdpfxswkkpqo Ah Dek Machine picture shown is for example only. Machine has not been installed.

Condition: good (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 8070850, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG Photonics GmbH, laser power: 4,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, overall weight: 420 kg, total length: 856 mm, total width: 806 mm, total height: 1,186 mm, Equipment: cooling unit, Technical Data Manufacturer: IPG Laser GmbH Laser Model: YLS-4000-S2-IHE Serial Number (SN): 8070850 Rated Voltage: 400V AC +-10% 3P/PE Frequency: 50/60 Hz Full Load Current: 80 A Fuses: 80A / 120kA Date of Manufacture: 08.12.2008 Wiring Diagram: G25-16-70820-4 Cooler Wiring Diagram: G25-16-61012-4 Certification: CE marking Wavelength: 1070 nm Wavelength Bandwidth: approx. 1070 nm – 1080 nm Rated Output Power: 4.0 kW Laser Class: Class 4 Power Control: 10% to 100% Typical Fiber Diameter (Delivery Fiber): Mostly 100 µm (micrometers) Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Gjbn N Ay Dowza Dxogoil Itodpfxjzc Hpvo Ah Dok Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, operating hours: 7,198 h, power: 18.5 kW (25.15 HP), cutting width (max.): 900 mm, This machine comes with a Woodmizer hydraulic log deck It has a 7m cutting length Itjdpfx Aoyub Iqsh Dok 18.5kWh saw engine

Condition: used, functionality: fully functional, For sale is a Gránit-Mill 90 pellet press in good condition, suitable for pellet production or use in the animal feed industry. The main components of the machine are: * Pre-hopper * Feeder screw * Permanent magnet * Conditioner * Press * Control cabinet Motors: * Pre-hopper motor: 1.1 kW * Feeder motor: 1.5 kW * Conditioner motor: 15 kW * Table motor: 0.55 kW * Main motor: 90 kW Accessories: * 2 stickers * 1 set of grooved rollers (total of 2) Iedpezc Eudjfx Ah Djtk Additional information: The control cabinet was originally designed for the simultaneous operation of two presses, but it is also possible to control the presses separately. Price: * 1 Gránit-Mill 90 press with complete accessories and control cabinet: 29,000 EUR * When purchasing two presses together: 44,900 EUR The machines can be viewed at our location by prior arrangement. Further technical information, photos, and videos are available upon request.