Used Equiptec Es 1200 for sale (11,689)

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: Dedpfxey Auhzj Apwokl * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, total width: 2,480 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Below is an excerpt from the equipment. Full specification available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched-through Z cross members; close cross member spacing for high floor load capacity * Ramp holder: Between the longitudinal beams, behind the axle assembly, under the loading floor, two slide-in pockets for loading ramps (one per pocket), with cover plate in the rear head frame Underrun protection: * In accordance with EU regulations Landing legs: * Front: landing legs with single-sided operation * Rear support: two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, brand SAF, approx. 300 x 200mm drum brakes, center-bored for twin tires, ABS, total air suspension lift approx. 200mm (of which raise approx. 140mm, lower approx. 60mm), manual lever control with detent function Tyres: * 8 units, 235/75 R17.5 - brand of our choice. Mounted on 6.75x17.5 rims with offset Splash guards: * PVC splash guards in front of and behind the axles as per EU regulations Load securing: * On the outer frame, boreholes for lashing straps at approx. every 150 mm, lashing capacity approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 insert stakes: 3 pairs on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EU regulations with EBS * Two coils as coupling to the truck, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z hardwood floor recessed into the outer frame Lighting system: * Lighting system according to EU standards, 24 Volt, multi-chamber rear lights, license plate lights, side marker and lane departure lights at the rear, connection plate left at the drawbar, including connecting cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holders * Detachable flashing beacon at the rear * 40 mm towing device supplied (GVW max. 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable rigid drawbar in length, 6 x approx. 100 mm increments, with bolted 50 mm towing eye per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 galvanized pipe insert stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Container locks 1 x 20' extendable to approx. 2,820 mm, compliant with ISO 1496, EN 284 or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Djdjy Auf Tepfx Apwskl Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technological standard * Body components cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Fittings: galvanized / KTL black

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm Dksdpfx Aoyz E T Sspwol * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: ready for operation (used), Brand: HERAEUS Dsdpey Nlfdofx Apwekl Maximum temperature: 1200 °C Internal furnace dimensions: 390 x 200 mm, depth: 650 mm

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) Dkodpfx Apoyy Ngmswsl - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, empty load weight: 9,140 kg, maximum load weight: 28,860 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 01/2007, loading space length: 11,600 mm, loading space width: 2,520 mm, loading space height: 890 mm, suspension: air, tire size: 235/75R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 2 axles, air suspension, last axle steered, ABS (anti-lock braking system), extendable to 3 m, lashing eyes, hydraulic ramps, rear support, side aluminium underrun protection, support legs, twin tyres. Body: 2-axle low loader trailer with hydraulic loading ramps. All information without guarantee as the trailer is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Dksdpfoyzgndox Apwsl

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg Load Capacity Welding Positioner, CE Certificate Load capacity horizontal: 1200 kg Load capacity tilted: 1200 kg with a load center at 250 mm Very robust Continuously adjustable speed from 0.05 to 0.7 rpm (higher speeds available at extra conversion cost) Turntable diameter: 1200 mm Tilting up to 120° Height horizontal: 1,050 mm, tilted up to center: 880 mm Dkjdpfx Apsxq S Nijwel Hand and foot remote control Dimensions: 1.35 m (length) x 1.2 m (width) Chuck or quick-change chuck available for extra charge, depending on size As shown, diameter 1000 mm, price: €2,900 (special price, only available when purchased with the welding positioner) Counter bearing with steps: €480, counter bearing with screw adjustment: €880; load capacity 4000 kg

Condition: used, Professional granite surface plate – renowned quality by Mitutoyo / Planolith (Made in Germany). Ideal for use in quality control, tool shops, and metrology. ⸻ Specifications: • Plate dimensions: approx. 1200 x 800 mm • Thickness: approx. 170 mm • Weight: approx. 460 kg • Accuracy class: DIN 876/0 (high precision) • Permissible deviation: 0.009 mm • Actual deviation: 0.00273 mm • Manufacturer: Planolith GmbH / Mitutoyo • Country of manufacture: Germany • Includes: solid steel stand ⸻ Advantages: Very high measurement accuracy Stable construction – heavy granite dampens vibrations Ideal for measurements, marking out, and component inspection Professional equipment Ready for use ⸻ Condition: Dkodpfx Apeyw Ubqjwjl Used item – shows normal signs of wear (scratches visible on the surface), but is fully functional and maintains its specification parameters.

Condition: used, functionality: fully functional, ES-300 ASTD cutting machine – fixed bridge saw for cutting marble, granite, and ceramics, model ES-300 A with automatic X and Z axis movement, rear stop with handwheel, and 2 idle roller conveyors. Dkedpfx Ajy Dch Ejpwsl

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: similar beige total width: approx. 1.200 mm Dksdolucaqepfx Apwel total height: approx. 1.100 mm Mesh size (outside): approx. 93 x 53 mm Mesh width (inside): approx. 88 x 48 mm Frame profile dim.: L-profile 30 x 30 mm The back wall grids are rusty, partly the frame profile is damaged, see pictures.

Condition: new, table length 2400 mm Djdexaablopfx Apwskl table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: good (used), PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens, control card Simatic S5 -Type: PC 612 F B1200 6ES5281-4UA12 Dsdpohy Rpmefx Apwokl -Dimensions: 275/200/H50 mm -Weight: 0.5 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit, spindle amplifier module, control unit -Manufacturer: Robosoft, control unit from press brake HACO type PPES 30135 -Type: 411-1084 / 412-0112 / 412-0094 see photo nameplate -Dimensions: 295/190/H145 mm -Weight: 2.5 kg. Dkedpfx Aordil Rspwjl

Condition: used, Year of construction: 2016, operating hours: 6,168 h, machine/vehicle number: 03001246303, mast type: telescopic, fuel type: diesel, Empty weight: 18.650 kg Lifting capacity: 230 kg Working height: 3.873 cm Front tyres / undercarriage remaining: 30 Dkedpfx Apsxu Aizswjl Rear tyres remaining : 30 Tyre brand: Outrigger Max. horizontal reach: 2351 m Transport dimensions (LxWxH): 13.7x2.49x3.05 Please contact PFEIFER GROUP for more information

Condition: good (used), Polar Mohr 78 ES Paper Guillotine Machine in very good condition, serviced and ready to use. Made in Germany. Technical specifications: Cutting width: 780mm Stack height: 120mm LCD display Power supply: 400V Dkjdpeywdq Isfx Apwol Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Perfecta BSH5-1200 Paper Stack Lifter The device is in perfect condition. Dedpoywdmisfx Apwekl Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 1200 kg. Pallet/sheet dimensions: 990 x 1350 mm. Documentation included.

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You will find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment features. Full equipment details available on request. Chassis: * Welded construction made from high-quality steel sections with punched cross-members, designed for high point loads * Outer frame made of UNP steel Coupling device: * 2-inch kingpin Underrun protection: * In accordance with EC regulations, bolted version Side guard: * In accordance with EC regulations Landing gear: * Landing legs with single-sided operation, static load approx. 66 t / lifting capacity approx. 24 t Axles: * 5 x 10 t air-suspended axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Wheel connection: centre-guided 10-hole with ET 0 * Total air suspension travel approx. 200 mm (raising approx. 140 mm, lowering approx. 60 mm), controlled via rotary slide valve with detent function Steering: * 1st axle as self-steering, 2nd axle fixed, 3rd, 4th, and 5th axles forced steered via linkage * Centralized grease points positioned externally Axle lift: * First and second axles automatically liftable, with additional manual override at the chassis Brake system: * Two-line compressed air brake system in accordance with EC regulations, with EBS and RSS, automatic load-dependent control, Wabco 4S/3M system * Spring brake cylinders as parking brake, tamper-proof coupling heads permanently mounted on the front cross member, without connection line to the tractor unit * Aluminum air reservoirs Tyres: * 10 x 445/65 R22.5 164J on 11.75x22.5 ET 0 rims – brand of our choice TPMS: * Tyre pressure monitoring system (TPMS) in accordance with ECE R141, with data transmission to tractor unit Mudguards: * In accordance with EC regulations, 1st axle front, 2nd axle rear, 3rd–5th axles each with 1/4 PVC mudguard front and rear * Rear mudguards with spray suppression flaps Load securing: * 5 pairs of folding lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t) * 10 pairs of lashing rings in the side outer frame, evenly distributed (lashing capacity approx. 8 t) Stanchion pockets: * 10 pairs of stanchion pockets recessed into the outer frame * 6 pairs of stanchion pockets flush-mounted in the floor (outer longitudinal beam) Removable stanchions: * 16 galvanized plug-in stanchions, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stanchion magazine: * Each side, in front of the front wall, a magazine for 8 plug-in stanchions approx. 80/80 mm Front wall: * Bolted corner stanchions filled with aluminum box sections, interior with full-width and full-height steel collision protection plate Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame, flush finished Lighting system: * In accordance with EC regulations, 24 Volt with multi-chamber rear lamps * LED side marker lights * LED position lights, white, front * LED marker lights, rear * Number plate lights, 1x 15-pin and 2x 7-pin connectors at front cross member Equipment: * Two chocks with holders * Warning board according to ECE 70 Dkodpfx Apswx Dcaowjl * Work light at the lamp bracket (activated via reverse gear) * Holder for rotating beacon at the rear (includes beacon) * Each side left and right: 1 permanently mounted access ladder, including plug-in step * Smart Board * 'Vehicle swings out' sticker, load centre marking sticker Paintwork: * Chassis and front wal

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each Dkodpjwx Dctsfx Apwsl * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: new, Year of construction: 2024, overall grade 1-5 (1 bad, 5 like new): 5/5 certificates: CE, TÜV Manual/Mechanical quick coupler Additional hydraulics Quick change Rubber tracks Standard bucket Hammer function Mini digger Rhinoceros xn12-8 Year 2023 Equipped with strong 3 cyl Kubota diesel 2x excavator bucket + adjustable undercarriage Extra option: Mechanical switch Thumb Ripper 1 year warranty on parts, excluding wear and tear Lease also possible, ask for the conditions Total weight gvw: 1.200 kg Dkodjxb Epwjpfx Apwol Motor: Kubota 3 cylinder Engine manufacturer: Kubota Production country: China General grade (1 min - 5 max): 5/5 Gross weight: 1.200 kg Engine: Kubota 3 cylinder

Condition: excellent (used), Hydromotor for screw cylinder Dodpfx Apefnqagewekl Injection unit size ES3550 Hägglunds Drives Type CA50 20 2 0 0 N 004

Condition: ready for operation (used), Siemens C98043-A1200-L 107 control card SN:Q69004, used, in good preserved condition, 100% functional, scope of delivery as per photos. Dkjdpfexlwq Isx Apwjl

Condition: new, Brinkmann TS 21/300-MV+211 submersible pump SN:0412003832-92658001 ,unused, 100% functional, scope of delivery as per photos Dedpfx Apour A Uxewekl

Condition: ready for operation (used), DMU SK40 motor spindle with variable speed from 20-12000 rpm. SN: 10222292 r, used, heavy signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Dodpfx Aek Ru Dkepwjkl

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device Djdpfx Aewx Dbpopwskl - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: new, maximum load weight: 34,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through cross members, designed for high floor or point loads, equipped with a heavy-duty outer frame * Loading platform at the rear as a welded steel construction, with two welded-in outer driving rails made of 5-hole steel plate (Lohr/Rolfo hole pattern system) approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear section includes a hydraulically extendable loading table (approx. 1,500 mm), constructed from welded steel with 5-hole steel plate (Lohr/Rolfo hole pattern system) cover, lighting brackets, and two ramp compartments and ramp supports * Drive and control of the rear operated via electric-hydraulic power unit housed in a stainless-steel box mounted on the left of the chassis, with radio remote control * Power supplied by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the truck) Towing Device: * 2" king pin, replaceable from below Underrun Protection: * Fixed as per EU standard Landing Legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 9 t air suspension axle assemblies * Brand: SAF, disc brakes approx. 370 x 45 mm * ABS * 10-hole hub-centric wheels, offset ET120 * Total air suspension travel approx. 310 mm (lifting approx. 220 mm, lowering approx. 90 mm) * Air suspension controlled via hand lever with stop function Lift Axle: * 1st and 3rd axles automatically liftable, can also be actuated from the chassis frame or via PIN 12 of the lighting socket Tires: * 6 units, 445/45R19.5, fitted on 14.00X19.5 rims, 10-hole ET120 Dsdpfowt Iylex Apwekl Mudguards: * As per EU regulations, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Brand: Wabco * Dual-line brake system as per EU with EBS, automatically load-dependent control * Spring-operated parking brake acting on 2 axles * Interchange-proof coupling heads fixed to the front cross member, no connection to towing vehicle Lighting System: * As per EU regulations, 24V, * Multi-chamber rear lights, * License plate lights * LED side marker lights * LED front position light (white) and rear track lights * 15-pin socket and 2x7-pin sockets fixed at the front cross member, no cables to towing vehicle Load Securing: * 9 pairs of foldable lashing rings evenly distributed, approx. 8 t pulling force * 8 pairs of foldable lashing rings evenly distributed, approx. 2.5 t pulling force * 2 pairs of foldable lashing rings at the rear, approx. 2.5 t pulling force * External frame with holes approx. every 500 mm for tie-down straps Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pockets: * 8 per side integrated into the outer frame * 4 rows of stake pockets transverse to the loading area Floor: * Approx. 28 mm Z-grade hardwood floor recessed into the outer frame Front Wall: * Solid front wall * Depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to the top frame Equipment: * 2 wheel chocks with holders * 2x PVC toolboxes, approx. 600/400/500 mm * Holder for beacon light at rear incl. lamp * 2 LED reversing lights (rear) * 2 aluminum loading ramps, dimensions approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair * Wheel load