Used Foliant Laminator for sale (904)

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Gedpfx Asydnxnsl Sjbu Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, single-sided lamination heated upper steel roller Gjdpfozyk A Hox Al Sjbu

Condition: like new (used), Year of construction: 2013, Grafisk Maskinfabrik Rewinder/Slitter Gbjdeipvhnopfx Al Seu

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, total height: 2,500 mm, total width: 3,000 mm, total length: 10,000 mm, TECHNICAL DATA * Standard dimensions of vacuum bags: 2650 x 5,150 mm * Dimensions for flat glass lamination (using silicone bags): 2,500 x 5,000 mm * Lamination frames: two * Maximum load per lamination frame: 1,200 kg distributed over the entire surface. * Vacuum pumps: two (one for each frame) * Heating zones: 9 zones, each monitored by a thermocouple. * Temperature measurement of heating chambers: 9 + 1 thermocouples connected to the PLC system. * Vacuum control and monitoring: Digital pressure sensors connected to the PLC system on the operator panel. * Overheat protection: one independent thermocouple inside the chamber, with the ability to cut off the power circuit in case of furnace overheating. * Electrical panel, control panel, and wiring: manufactured according to "EC" guidelines. * Safety features: according to "EU" guidelines. * Installed power / power supply: 54 kW per chamber. 400V 50 / 60Hz, three-phase + N + T * Average consumption: < 20 kW per hour. * Control / monitoring system with TEMA 2020 SOFTWARE: -PLC system and intuitive operator graphic interface with touchscreen. -Multilingual -Up to 6 (six) settings, with no time limitations. -Real-time graphs: average temperature of the furnace and modules, each heating zone, vacuum (with the possibility of disconnecting the pump at any time). -Power consumption. -Historical archive of data from the last 500 hours of production, displayed in a graphic and text file. Gbodpjz Ihikjfx Al Seu -Log of all operations and alarms. -Program < EASY MAINTENANCE > for vacuum pumps. -Delayed start of the process (for night use) -kW meter. -Remote control from various devices (smartphone, tablet, computer, etc.) -Report of the entire lamination process downloadable via USB. -Remote assistance LIFT – lifting platform * Lifting platform with servomotor assistance to align the lamination frames with the laminating frame. Essentially consists of a single hydraulically controlled lifting platform, equipped with appropriate tracks for moving the lamination frame.

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm Gbsdsx Eb Abepfx Al Sou - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Manufactured in 2003, this machine remains in excellent technical condition thanks to proper maintenance and care. It offers a versatile configuration with a working width of 1,900 mm. The line is equipped with: • Raw material unwinding stations • J-box for face materials • Powder scattering unit • IR heating station • Lamination head • Cooling system • Tension control system • Central winding unit Gbedpfx Aljz E S H Ij Seu A key feature is the additional upper pressing roller, which enables the production of 3-ply laminated composites in a single pass. Depending on the application, the machine can bond layers using thermoplastic adhesive supplied in roll form, thermoplastic powder, or a combination of both.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1303, total width: 4,400 mm, total length: 3,300 mm, total height: 1,700 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 3,210 mm, feed length Y-axis: 3,300 mm, cutting length (max.): 3,300 mm, We offer this Hegla VSG-M 33 MT laminated glass cutting table, which is in very good condition and was manufactured in 2005. Gjdpfx Asz Hl T Rel Sebu Manufacturer: Hegla Model: VSG-M 33 MT Year of manufacture: 2005 Condition: very good ID Category: 518 ID Machine Type: 898 Type: laminated glass cutting table If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total width: 4,600 mm, total length: 9,100 mm, total height: 3,000 mm, overall weight: 40,500 kg, Double-production solar panel laminating machine This laminator is used to produce solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. Gedpjzrdhgsfx Al Sebu The materials are laminated under pressure and temperature. The lamination process is carried out under vacuum, preventing the inclusion of undesirable entrapped gases in the final product. Finally, the finished laminate is conveyed out of the laminator. The machine comes with many spare parts and can be viewed in operation.

Condition: excellent (used), Year of construction: 2017, operating hours: 52 h, machine/vehicle number: 1704476, Single-sided, sheet-fed, thin-film thermal laminator for long print runs. Maximum sheet size: 106 x 106 cm (41 3/4” x 41 3/4”), Minimum sheet size: 28.5 cm x 32 cm (11.5” x 12.5”), Maximum speed: 120 m/min (394 ft/min), paper weight from 115 gsm (80 lb text) to 650 gsm (24 pt). Quick setup, easy operation, robust construction. • Heidelberg Speedmaster feed head, rising pile, back separation, stream feeder, vacuum feed table, servo-driven mechanical front-lay registration, maximum pile height 1.2 m (47”). Gbedpfx Aezudqgel Sou Water-heated chrome laminating roller.

Condition: used, Year of construction: 2017, Year: 2017 Condition: Very good Counter: Approx. 762,000 sheets Configuration: - Heidelberg suction feeder head - Pneumatic pressure system - Automatic sheet separation - New Teflon-coated non-stick roller - Foiling unit for spot foil application - Vibrating jogger delivery Technical Specifications: - Maximum laminating speed: 20 m/min - Sheet feeding: Automatic - Feeding system: Heidelberg suction feeder head - Feeder pile capacity: 540 mm - Sheet overlap control: Automatic, PLC-controlled - Overlap accuracy: ±2 mm - Sheet separation: Automatic, by cycling rollers Gedpfx Alsz D Udto Sebu - Paper weight: 115–500 gsm - Main roller pressure: Pneumatic - Minimum sheet size: 200 × 300 mm - Maximum sheet size: 530 × 740 mm - Maximum output: Approx. 1,650 B2 sheets/hour - Warm-up time: Approx. 8 minutes - Laminating temperature: 80–140 °C - External compressor requirement: 150 l/min, 6–8 bar - Power supply: 400 V / 50 Hz

Condition: used, Year of construction: 2001, Format: 300 mm Gsdpfsy R U Ttox Al Sebu

Condition: good (used), SEAL AquaSEAL SW 3300 — Liquid Laminator The AquaSEAL SW 3300 applies water-based protective coatings to wide-format digital prints, including banners, billboards, vehicle graphics and truck curtain sides. It applies, smooths and dries the coating, providing protection against water, abrasion, UV exposure and chemicals when used with suitable AquaSEAL liquid laminates. Automatic infrared curing with Accucure Feedback control. Segmented heaters for processing narrower materials. Roll-fed or fan-folded operation. Multiple-roll handling capability. Variable speed and touch-sensitive control panel. Non-stick coated parts for easier cleaning. Technical specification Maximum coating width: 3,300 mm Maximum processing speed: Up to 3 m/min, depending on material and Meyer bar Dimensions (W × D × H): 4,000 × 1,200 × 1,100 mm Machine weight: 816 kg Electrical requirements: 3N/PE, 208–240 V, 50/60 Hz, 26 A per phase Compressed air requirements: 90–125 psi Material feeding: Roll-fed or fan-folded Standard coating bar: Smooth bar Gedpfxjz Ndtnj Al Sebu

Condition: used, Year of construction: 2007, working width: 1,650 mm, compressed air connection: 6 bar, roll diameter: 200 mm, Foliostar coupling machine with collating unit and manual collection. Godozxp Daepfx Al Sebu

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 Gbedszyu Nqspfx Al Seu • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 • Serial number: 801213 • Gluing system: NORDSON • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 • Automatic feeding • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. The machine currently shows: 3,525 operating hours 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.

Condition: used, This listing is for a Thermo Scientific Heraguard ECO 1.5 Laminar Flow Clean Bench The unit is in full working condition and ready for immediate use This laminar flow clean bench is a high-quality lab instrument manufactured by Thermo Scientific (Model: ECO 1.5). Provides a highly efficient HEPA-filtered workspace designed to protect sensitive samples and materials from airborne contamination during routine laboratory procedures. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Gsdpozugdiofx Al Sjbu By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 55, working width: 600 mm, compressed air connection: 6 bar, type of input current: AC, total width: 2,250 mm, total length: 7,220 mm, total height: 1,840 mm, stack height: 500 mm, overall weight: 3,000 kg, Equipment: CE marking, PERONDI C800 laminating machine and PERONDI R4L 600 in good condition, available for sale. The sale also includes the following equipment, providing a complete and versatile production setup: Hot-melt glue system Feeder Vacuum belt Pressing rollers All included equipment has been part of the production setup and is offered together with the machines. The equipment has been well maintained and carefully operated and is in good condition. Machine highlights: Manufacturer: PERONDI Gbedpfx Alez Hm Nte Sju Good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for continued production Inspection possible by appointment This is an attractive opportunity to acquire a well-maintained PERONDI C800 and PERONDI R4L 600 laminator with limited daily use and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Year of construction: 2023, condition: like new (used), functionality: fully functional, ESCO Airstream Gen 3 Vertical Laminar Flow Cabinet Type: LVG-3AG-F8 Gbsdpfxjz D Tkfs Al Sju Airstream Gen 3 Vertical Laminar Flow Cabinet While others rely on traditional PSC motors, the Esco Airstream® Gen 3 Vertical Laminar Flow Cabinet is the only vertical-type clean bench in the market that uses Direct Current Electronically Commutated Motor (DC ECM) technology. Reducing energy costs by up to 70%, these clean benches are the greenest ones yet. The secret to achieving energy savings through ECM technology lies in its high electrical efficiency and ability to run precisely on programmed speeds. Enjoy low heat and noise emission as well with the Esco Airstream Gen 3 Vertical Laminar Flow Cabinet. Esco's laminar air flow cabinet is a product of robust engineering combined with strategic ergonomic design. It provides long-term reliability and ultimate user comfort making it ideal for non-hazardous applications that need a sterile environment

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 6037409-120, max. 1650 mm working width wide range of material and high flexibility maximum speed of 8 m/min for increased production capacity electrical nip adjustment of 40 mm for precise operation heated top roller (70°C) for superb lamination performance variable roller technology for better processing of soft substrates Godpfx Aez D U Tuel Sebu flip up infeed table to facilitate easy setup pull-out trough for easy feeding of single prints up to 10 m additional control panel at the rear of the machine roll to roll built in outboard brakes for a better control of material unwind robust model range Safety: foot switch for hands free operation self-checking safety eyes for increased operator safety removable finger guard ledge CE certified

Condition: excellent (used), SMT Turning Lathe 80001350 This machine was designed and manufactured to produce rotor shafts for electric power tools. The machine was designed and manufactured to automatically perform the following operations: - Automatic loading/unloading of parts from/to the tool carrier line using a pick-and-place unit between the shaft ends. - Turning the ring seat + plunge cutting the commutator + turning the commutator. - Ring assembly - commutator side - Ring assembly - drive wheel side The machine has several production programs to manufacture different parts. Each program corresponds uniquely to a shaft type. Technical data Gbjdpfx Ashw Emqel Ssu Anchor shaft length from 92.5 to 163.1 mm Bearing journal diameter, commutator side: 8; 10; 12.5 mm Drive side: 12; 8 mm Min. available length at the bearing location: 3.6 mm Package diameter: 52; 55; 59 mm Ring dimensions Outer diameter: 40 - 57.4 mm Inner diameter: 37.4 - 56 mm Ring width: 4 - 8 mm Ring seat diameter: 44 - 50 mm Surface roughness of ring seat: Rz 20 mm Main dimensions and weight of the machine Machine length: 2870 mm Machine width: 2600 mm Machine height: 2530 mm Machine weight: 5000 kg Electrical installation Rated current: 10 A Rated voltage (AC): 400 V Rated power: 7 kVA Rated frequency: 50 Hz Pneumatic installation Nominal pressure: 5 bar Maximum pressure: 10 bar You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Gedpfx Alez Ek S Ao Sjbu Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, machine/vehicle number: 6694, We are offering our laminating line for sale. The following components have already been serviced/overhauled: · Overhaul or cleaning of the sheet feeder drive unit in 2025 · New main drive 2024 with frequency converter (manufacturer SEW) · Overhaul of temperature control units (2 pcs.) in 2022 · Dryer drum and laminating roller · Heaters, level switches, and power contactors have been replaced. · Slip clutch separator overhauled in 2023 · Application roller modified with motor and frequency converter (manufacturer SEW) in 2017 The machine is still in operation and is being sold due to a reduction in our machine fleet. Gbsdoyt Iprspfx Al Sou

Condition: good (used), Roll Lam 120CS Roll Laminator Double-sided cold lamination, original base included, Lamination width: 1200 mm Manufactured by: Biedermann GmbH Roll laminator equipped with silicone-coated rollers. Technical specifications: Working width / rollers: 120 cm Working width / roll width 130 cm Dimensions (W x D x H): 170 x 68 x 125 cm Infeed table height: 92 cm Weight (with base): approx. 168 kg Maximum board thickness: up to 25 mm Roller diameter: approx. 112 mm (silicone-coated) Gbsdezuryvjpfx Al Seu Maximum speed: approx. 3.5 m/min Power supply: 230 V / 0.07 kW

Condition: used, Year of construction: 2014, functionality: fully functional, product width (max.): 1,400 mm, Roll winding, laminating, printing, and folding machine for sale. -Two printing units with chamber doctor blade system. -Cassoli calender with sleeve embossing. Gedpfxez Rn A Re Al Sebu -Film laminating, folding machine with triangular fold. -Packaging machine for rolled goods up to 1400 mm wide. -A Hugo Beck packaging machine for the folded products is also for sale. Further details can be found in the images.

Condition: like new (used), Seewer Rondo Doughroller In good working condition for more information please sent an request Gbjdpsumpt Dofx Al Seu

Condition: used, This listing is for the Basair Laminair Flow P Range Safety Cabinet Gbjdpsyu Titofx Al Sju The unit is in full working condition and is ready for immediate use Bassaire P-Range Laminar Flow Units are designed to provide an ultra-clean, particle-free environment to protect products, conforming to BSEN ISO 14644 (ISO Class 4 & 5) standards. Constructed from high-quality powder-coated white carbon steel or stainless steel, these units offer reliable vertical laminar airflow and are suitable for laboratories requiring strict contamination control