Used Fremtas(Stanko/Sedin) Vertical Turning Lathe for sale (15,802)

Condition: excellent (used), Year of construction: 2009, turning height: 1,280 mm, total height: 5,600 mm, total width: 3,850 mm, total length: 4,260 mm, rotary table diameter: 1,400 mm, workpiece diameter (max.): 1,600 mm, overall weight: 21,500 kg, CNC Vertical lathe Fremtas - 16FR3 MACH-ID 9467 Make: Fremtas Type: 16FR3 Control: FAGOR 8055 TC Nledjy Htilepfx Am Tod Year: 2009 Work load 6300 Kg Cross rail adjustment 660 mm Feed rate cross rail 0 - 400 mm/Min Feed rate 0 - 3000 mm/Min Rapid feed 0 - 8000 mm/Min Central lubrication Chip conveyor RAM with Sandvik COROMONT C8 Tooling C8 with double connector Ca 10 units CAPTO Tool system 4 extra heavy duty jaws Max. turning Ø: 1600mm Table Ø: 1400mm Horizontal movement support:1000mm Speeds / ranges: 1 - 200Rpm Power: 75kW Maximum turning height: 1280mm Vertical movement support: 700mm Length: 4260mm Width: 3850mm Height: 5600mm Weight: 21500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2001, operating hours: 42,400 h, functionality: fully functional, machine/vehicle number: 0680 0000521, travel distance X-axis: 800 mm, spindle speed (max.): 5,000 rpm, turning length: 300 mm, spindle bore: 79 mm, controller model: Siemens 840D, TECHNICAL DETAILS Turning length: 300 mm Travel distance X-axis: 800 mm Travel distance Z-axis: 300 mm Speed range, main drive: 20 - 5,000 rpm Speed range, C-axis: 0 - 100 rpm Spindle bore: 79 mm Nledpfx Aezb Efgjm Tsd Torque, main drive: 200 Nm Torque at the spindle: 240 Nm Torque, clamping device: 28 Nm Rapid traverse rate, X-axis: 100 m/min Rapid traverse rate, Z-axis: 45 m/min Tools and tool magazine Number of tool magazine positions: 12 Speed of driven tool, max.: 6,000 rpm Tool interface: VDI 40 Clamping area in the working area (W x H): 340 x 430 mm Number of T-slots according to DIN 650: 7 MACHINE DETAILS Control model: Siemens 840D Power, main spindle: 27 / 20 kW Total power requirement: 50 kVA Electrical version - voltage/frequency: 3~ / 400 V / 50 Hz Interface: yes Spindle operating hours: 42,400 h Total operating hours: 93,728 h Dimensions & Weight Machine dimensions (L x W x H): 3,200 x 3,950 x 2,800 mm Chip conveyor dimensions (L x W x H): 3,400 x 1,150 x 2,180 mm Machine weight: 8 t EQUIPMENT High-pressure coolant system (capacity: 500 l) Chip conveyor with oil mist separator / industrial filter IFM 1000CTV Workpiece loading and unloading device with 20 stations Hydraulic chuck (225 mm) Hydraulics 6x various turning tool holders 2x various tool holders (driven)

Condition: good (used), Year of construction: 2010, functionality: fully functional, We offer you: CNC vertical turning center Manufacturer: EMAG Type: VSC 250 Duo DD Year of manufacture: 2010 / 2012 Control system: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. swing diameter: 260 mm Main spindle: Max. speed: 4,500 rpm Max. torque: 250 / 340 / 460 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Number of tool positions: 12 Max. tool diameter: 50 mm Max. workpiece weight: 20 kg Max. workpiece diameter: 240 mm Feeds: Rapid traverse (x / z): 45 / 30 m/min Njdozdbv Tspfx Am Told Total power consumption: 66 / 75 kW Machine weight: approx. 16 / 18.5 tons There are 3 identical machines available, 2 manufactured in 2010, 1 in 2012. Technical features & accessories: - Marposs measuring system - Open automation - W10 loading portal - Safety guard - Minimum quantity lubrication - In-process quality control - Central coolant supply (not included) - Chip conveyor Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2010, functionality: fully functional, We offer you: CNC vertical turning center Manufacturer: EMAG Type: VTC 250 LEAN Year of manufacture: 2010 Control: Siemens 840D sl Technical data: Max. turning diameter: 140 mm Max. turning length: 700 mm Max. swing diameter: 376 mm Main spindle: Max. speed: 5,000 rpm Max. torque: 256 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 1 Number of tool positions: 5 + gripper / 11 + gripper Max. tool diameter: 125 mm Max. tool weight: 10 kg Max. tool length: 120 mm Max. workpiece weight: 20 kg Feed rates: Rapid traverse (x / z): 40 / 30 m/min Total power consumption: 45 kW Machine weight: approx. 12 tons There are 6 identical machines available. Technical features & accessories: - Open automation Nlodpfx Aezdbtxjm Ted - Safety device - Preparation for extraction - Handling infeed and outfeed - Central extraction (not included) - Central coolant supply (not included) - Chip conveyor (1 for 3 machines) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is mentioned in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2011, functionality: fully functional, We offer you: CNC vertical turning lathe Manufacturer: EMAG Type: VTC 250 Year of manufacture: 2011 / 2012 Control: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. turning length: 630 / 730 mm Max. swing diameter: 140 / 260 mm Main spindle: Nledpfxjzdbtfs Am Tjd Max. speed: 3,500 / 4,000 rpm Max. torque: 256 Nm Spindle bore: 50 / 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Max. tool weight: 10 kg Max. tool length: 90 mm Max. workpiece weight: 20 kg Feeds: Rapid traverse (x / z): 40 / 30 m/min Total power requirement: 45 kW Machine weight: approx. 14 / 16 tons There are 2 units manufactured in 2011 and 1 unit manufactured in 2012 available. Technical features & accessories: - Year of manufacture 2011: Number of bed and cross slides: 2 - Year of manufacture 2012: Number of bed and cross slides: 1 - Tool monitoring - Protective guard - Collision monitoring - In-process quality control - Central coolant supply (not included) - Chip conveyor Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2023, machine/vehicle number: 21760666, feed length X-axis: 420 mm, turning height: 780 mm, Machine Data • Year of manufacture: 2023 • Recorded operating hours: 2,730 • Machine control system: SIEMENS, Type SINUMERIK 840D SL Technical Data • Travel ranges o X-axis travel: 420 mm o Z1 / Z2-axis travel: 780 mm o Z3-axis travel (tailstock): 600 mm o Z4-axis travel (steady rest, optional): 550 mm o Y-axis travel (optional): +51 / -23 mm • Rapid traverse rates o Z1 / Z2-axis: 60 m/min o Z3-axis (tailstock): 30 m/min o Z4-axis (steady rest, optional): 30 m/min o X-axis: 30 m/min o Y-axis (optional): 15 m/min • Working area o Distance between centers (spindle nose - tailstock): 780 mm o Max. turning diameter: 300 mm o Max. turning length: 750 mm o Workpiece weight: approx. 300 kg • Performance data o Max. speed: approx. 6,000 rpm o Power: approx. 26 kW • Tool turret o Tool positions: 12 o Turret indexing time, one station with locking: 0.3 s Nledpfx Amozgfphe Tod o Turret indexing time, station to station with locking: 0.5 s o Tool holder (DIN 69880): VDI 40 • Weight o Total weight: approx. 13,000 kg Peripherals • Chip conveyor, BÄR & CO., Type GF25L42L-P63, year of manufacture 2017, serial no. 61170009 • Air filter unit, IFS, Type M 1600, year of manufacture 2015, serial no. 544070-1, self-weight approx. 85 kg, connection power 400 / 460 V, 50 / 60 Hz, 0.75 kW, 1.7 / 1.5 A • Coolant filter unit, BÄR & CO., Type SF 51, year of manufacture 2018, serial no. 61180006 • Cooling unit, RKV, Type 4.3 K, year of manufacture 2018, serial no. 3-36613, connection power 400 V / 50 Hz, permissible operating pressure approx. 28 bar, tank volume approx. 90 l

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm Nljdsytn Emjpfx Am Ted FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: used, Year of construction: 2011, Vertical Twin-Spindle Turning Center - Siemens 840 D CNC control - VSC 400 Duo machine bed - 2 x disc turrets, 12 station, dia. 40 mm, driven - 2 x additional drilling and countersinking stations - Open workpiece transport system Nsdpfey N Snxsx Am Told - Transfer and turning unit - Interface for an external handling system - Central high-pressure coolant supply with pump, 70 bar - Air blow-off for pick-up unit and clamping devices - Workpiece measurement system - Tool monitoring - Emag network option - Sister tool management system Swing diameter: 260 mm X travel: 860 mm Z travel: 200 mm Main spindles: 2 Max spindle speed: up to 4,500 rpm Spindle distance: 1,055 mm Main drive: 2 AC asynchronous motor 60% / 100% duty cycle: 39 / 28 kW Max torque: 460 Nm Rapid traverse (X / Z): 45 / 30 m/min

Condition: like new (used), Year of construction: 2017, operating hours: 5,100 h, functionality: fully functional, machine/vehicle number: 110366, Number of axes: 5 + V Maximum turning diameter: Ø160 mm Maximum turning height: 150 mm Maximum diameter of workpiece: Ø100 mm Maximum height of workpiece: 150 mm Nljdpfx Ajy Ukgkem Tjd Maximum spindle speed: 6000 rpm Travel – x 700 mm Weight: 6000 kg.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Njdpfxjzdqdfs Am Told Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: good (used), Year of construction: 2013, functionality: fully functional, CNC vertical lathe / twin-spindle vertical turning machine Nlsdpfxozh H Rpj Am Tjd Year of commissioning: 2013 Manufacturer: FAMAR S.r.l., Italy Voltage: 400 V / 50 Hz / 3P + N + PE Power supply: 90 kW / 160 A max. Auxiliary circuits: 230 V AC PLC and general devices: 24 V DC CE marked: Yes Chip conveyor: Yes Workpiece conveyor system: Yes Concept: tandem machine with two independent machining stations Condition: used, regularly serviced, currently connected

Condition: used, Year of construction: 2002, feed length Y-axis: 1,200 mm, feed length Z-axis: 900 mm, Make: Daewoo-Doosan Model: PUMA V-1200M Category: Vertical CNC Turning Center Year of manufacture: 2002 CNC Control: FANUC Series 18-T Machine weight: 23,000 kg Machine dimensions Length: 8,500 mm Width: 4,900 mm Height: 5,650 mm Capacities Maximum turning diameter: Ø 1,600 mm Maximum machining diameter: Ø 1,600 mm Maximum machining height: 1,200 mm Maximum load on spindle: 6,000 kg Main spindle Chuck diameter: Ø 1,200 mm Spindle speed: 2 ÷ 320 rpm Number of ranges: 2 Motor power: 37/45 kW (continuous / 30 min) Powered spindle (RAM) Tool holder: ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 × 240 mm Travels X-axis: 1,200 mm Z-axis: 900 mm C-axis: 360° (minimum resolution 0.001°) Feed rates Rapid traverse X/Z axes: 10,000 mm/min Working feed rate X/Z: 3,000 mm/min Turret Number of stations: 16 Tool holders: BT-50 Drawbar type: 403 P50T-I Maximum tool diameter: Ø 400 mm Maximum tool length: 450 mm Maximum tool weight: 50 kg Maximum tool weight in the magazine: 600 kg Accessories Chip conveyor Coolant tank with washing pumps Nlsdjziavnjpfx Am Ted Spindle line cooler Powered and fixed tool holders Manuals, electrical diagrams, and CE Declaration.

Condition: refurbished (used), Year of construction: 1987, functionality: fully functional, turning diameter: 4,300 mm, faceplate diameter: 4,000 mm, Vertical Turning Lathe SC43 CNC, retrofitted and upgraded with CNC Fanuc 0𝑖-TF Plus Made in Romania by TITAN Year of manufacture: 1987 The machine was completely retrofitted in 2026 Nlsdpfsy A Iifox Am Tjd Main technical data: FACE PLATE DIA. MM 4000 MAX. SWING MM 4300 MAX HEIGHT UNDER THE CROSSRAIL MM 2000 MAX. LOADING ADMITTED KG 18,000 FACEPLATE SPEED RANGE 1-92 RPM FEEDS RANGE MM/ROT 0.05-5 CARRIAGE RAPID FEEDS MM/MIN 2500 MAIN D.C. MOTOR POWER KW 55 SIEMENS WITH SIEMENS DRIVER MACHINE WEIGHT APPROX. 63 TONS The machine has the following brand new components: - New electrical equipment with parts made by Schneider, Shrack, Siemens, with a new cabinet - New control panel - New micro switches - New hydraulic pump and components - New pump for guideway lubrication, and the entire installation was redone - New CNC Fanuc 0𝑖-TF Plus 55KW Main motor, Siemens, refurbished in 2018 with Siemens driver The main gearbox was checked and refurbished with new bearings. The machine was repainted. We grant a 6-month guarantee for parts. We can send more photos and a video showing the machine’s precision measurements. Do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 1977, turning diameter: 16,000 mm, faceplate diameter: 6,300 mm, year of last overhaul: 2026, Completely overhauled single-column vertical turning lathe, Blansko model SKSJ 1A, equipped with one vertical head for turning and milling operations. Nljdpfx Aszi S Tljm Tsd Technical specifications: Faceplate diameter: 6300 mm Maximum workpiece height: 4800 mm Max. turning diameter with column near the faceplate: 8000 mm Max. workpiece diameter: 14700 mm Max. workpiece diameter for internal turning: 16000 mm Infinitely variable faceplate rotation: 0.5 – 20 rpm Max. workpiece weight: 100 tons Milling spindle max. speed: 1500 rpm 2-speed gearbox with 15 kW Siemens motor Manual clamping, ISO 50 taper tool Machine weight: approx. 220 tons The machine was completely overhauled in 2025 and supplied with the following brand-new components: - New electrical cabinet made with CE-compliant components (Siemens, Schrack, etc.) - New Siemens 828 numerical control, 100 kW main drive motor, 27 Nm feed motors, and ZF reducers with a 1/5 ratio - New ballscrews on 2 axes (vertical head and crossrail) - New scales on 2 axes, Heidenhain - The hydraulic and support systems made with CE-compliant components (Rexroth, Brevini, Atos, etc.) - New lubrication system, DROPSA-Italy or similar For more information, please contact us.

Condition: good (used), Year of construction: 2008, For sale: 1 unit Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive unit rated power: 16.8 kW Rated torque: 100 Nm Speed: 1,000 – 7,000 rpm Travel speed Z-axis: max. 30 m/min Travel speed X-axis: max. 30 m/min Nlsdpsy H Iglsfx Am Tsd Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Note: The system will likely require some reprogramming, as it was previously integrated into a complete processing line. However, a stand-alone program is available. Transportation and loading can be organized Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team will be happy to assist you. Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your machine? For further information or contact options, please reach us via the contact form.

Condition: good (used), Year of construction: 2004, For sale are 2 units of Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z axis (vertical): 265 mm X axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Nedpfx Amoy H Ifuo Teld Spindle drive rated power: 16.8 kW Rated torque: 100 Nm Speed range: 1000 - 7000 rpm Traverse speed Z axis: max. 30 m/min Traverse speed X axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9000 kg Complete documentation available. Attention! The system will likely need some reprogramming as it was part of a complete production line. However, an individual program is available. On request, transport and loading can be organized throughout Europe for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team looks forward to assisting you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For more information or contact options, please reach us via the contact form.

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 340 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 215 mm, spindle motor power: 30 W, turning diameter: 200 mm, turning height: 200 mm, rotational speed (min.): 4,000 rpm, Manufacturer: FAMAR Model: ERGO 250 Category: Vertical CNC Lathe Year: 2004 CNC Control: Siemens 840D Specifications Maximum turning diameter: Ø 350 mm Maximum machining diameter: Ø 200 mm Maximum machining height: 200 mm Spindle Integrated electric spindle Chuck: Ø 250 mm Spindle nose: ASA A2-6 Spindle speed: 6,000 rpm Spindle power: 30 kW Axes X-axis: 340 mm (820 mm total) Y-axis: 120 mm (±60 mm) Z-axis: 215 mm C-axis: 360° with 0.001° resolution Heidenhain optical scales on the axes Rapid Traverse Rates X-axis: 60,000 mm/min Y-axis: 20,000 mm/min Z-axis: 30,000 mm/min Turret 12 positions Powered tools Powered tool speed: 4,000 rpm Powered tool power: 8 kW Turning tools: 25x25 mm Boring bar: Ø 40 mm Equipment Automatic loading/unloading system Pallet shuttle with workpiece pallets Chip conveyor Coolant tank with high-pressure pump Njdpozdu Dpjfx Am Tsld Fixed and powered tool holders Manuals and electrical diagrams CE declaration General Data Installed power: 50 kW Machine weight: 10,000 kg Dimensions: 5,200 x 3,200 x 3,200 mm (L x W x H)

Condition: good (used), Year of construction: 2004, Table diameter: 1220 mm Max. turning diameter: 1500 mm Table speed range: 4.5 to 100 rpm Feed range: 0.127 mm to 6.35 mm per revolution Maximum height under crossrail: 900/1200 mm Njdsxg Nmkspfx Am Tjld Slide travel (X-axis): 1000 mm Main drive motor: 41 kW Tool changer: 30 positions Accessories: - 8 clamping jaws - 30 tool holders with full enclosure - Oil mist extraction

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret -Version .300 - 2 step main gear -Side support -4 axis digital display (ACU-RITE / FAGOR) -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm Nsdscxi A Sopfx Am Tsld CONTROL: kconventional/SPS Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Nlodpfx Amed I Au Rj Tod Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -2 step main gear -24 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -tool magazine -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: CNC Fagor / Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm Nlsdpfx Amorcivgs Ted OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: Cycle control OTHER: Geometrical-acceptance according DIN8609

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 3200mm Max. workpiece height 1600mm Max. workpiece weight 16000kg Face plate diameter 2800mm Face plate rotation speed 0-80U/min Max. torque on face plate 67000Nm Performance of main drive 75kW SETTINGS: -1/2 supports -Capto quick change system / 3-fold steelholder -Telescopic cover -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing -chip conveyor -cooling water preparation Njdpfx Amscx Rvys Tjld -Turret -driven tools -... CONTROL: FAGOR/SIEMENS OTHER: Geometrie-Abnahme nach DIN8609

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2 step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: Nlodpfx Amed Ivyns Ted Cycle control OTHER: Geometrical-acceptance according DIN8609

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 1600(1800*)mm Max. workpiece height 1000(1500*)mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200(0-315*)rpm Max. torque on face plate 25000Nm Performance of main drive 75kW Nljdecx Rv Hjpfx Am Tsd SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -Version .300 - 2(3*) step main gear -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -tool magazine -machine housing -chip conveyor -cooling water preparation -Side support -... CONTROL: CNC Fagor / Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: new, Year of construction: 2026, NEW MACHINE TECHNICAL DATA: Working diameter 2500mm Max. workpiece height 1600mm Max. workpiece weight 16000kg Face plate diameter 2240mm Face plate rotation speed 0-100U/min Max. torque on face plate 50000Nm Performance of main drive 75kW SETTINGS: -1/2 supports -Capto quick change system / 3-ffold steelholder -Telescopic cover -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing -chip conveyor -cooling water preparation -Turret -driven tools -... CONTROL: FAGOR/SIEMENS OTHER: Geometrie-Abnahme nach DIN8609 Nlsdpjcxlylsfx Am Ted