Used Fronius Wf 25I R for sale (67,421)

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped ⭐ Device description/scope of delivery: Fronius Tps 4000 device fully equipped - nothing more is possible! - Pulse 400 amp power source - Fk 4000 FC cooling device with the optional filter including flow control - VR 4000 with the optional rollers at the bottom + extra long connecting hose package + metal feed rollers - only the best of the best installed. - Fronius Aw5000/aw4000 hose package with Job Master function on the burner (==>Display on the torch / amps, job, feed, arc adjustable on the torch) Photo = scope of delivery. New price approx. 15,000 euros (net) we offer it for 1/3 new price. Not comparable to Transsteel scrap. Why it's better to buy from us than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have 40-60 pieces in stock. Only these Fronius devices, no other manufacturers! - We don't just push the devices through, we disassemble them, inspect wear parts, replace them and only when everything works perfectly are the devices sold. - All of our devices are sold with the popular Fronius burners. NOT a 100 euro E*b*a*y burner but QUALITY! Depending on the equipment, the Fronius burners cost between 650 euros and 900 euros net! Nedjpgkkbopfx Akcjwi - Our devices are “all” clean and have no burn holes in the displays or countless burn holes/dents scattered throughout the device! You are buying an item from us that is worth seeing and doesn't look completely finished! - As a customer of ours, you have the opportunity to obtain suitable spare parts and support cheaply if the worst comes to the worst. - You will receive a proper invoice from us with VAT shown. All devices can be viewed, paid for and picked up by appointment at our main warehouse in Vienna! Insured shipping on a pallet is of course possible!

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Nsdpfx Akovlwh Decjwi Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 23423676, Equipment: type plate available, Fronius VarioSynergic 3400 G/W/E welding machine 6 pieces available, the price is per piece. In working condition. The data can be seen from the nameplate. Purchase is only possible for legal entities. Nedpfx Aksym Rq Secswi

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured using a self-supporting aluminum structure with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension: disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering mechanism, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting assist (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, mounted on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg). Kingpin Aluminum landing gears, manufacturer: Alu-Leg, 2 x 10 ton support load, swivel feet for air suspension. Braking System According to E.E.G. standards, two-line braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines, with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpins, 1 LED work spotlight inside at the front left, operated from the outside. Body/Tipping Body - Body fully welded inside Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt, plank profiles fully welded inside! Floor as a sliding floor system mounted on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a tapered design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 4 swivel locking rods, mounted in the welded aluminum rear frame in Teflon and stainless steel bearings, running aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar lining" for complete discharge, lateral brush seal and additional Kevlar lining on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24 plank system - smooth design! Njdpfx Akey U Syrjcjwi Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, or without hydraulic hoses. Accessories PVC mud flaps w

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Subframe made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering system, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting aid (without central control unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg) Kingpin Aluminum landing legs, manufacturer: Alu-Leg, 2 x 10 tons support load, for air suspension, we use swivel feet. Nwedpfxsgcw Ris Akcji Braking System According to E.E.G. standard, two-circuit braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1x 15-pole and 2x 7-pole socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpin, 1 LED work spotlight inside at the front left, operable from the outside. Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system installed on 140 mm aluminum crossmembers, floor load approx. 7 tons/m2, crossmembers mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 4 swivel rod locks, mounted in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, a following aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar tarpaulin" for complete discharge, lateral brush seal and additional Kevlar tarpaulin on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside on the left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24-plank system - smooth design Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders wi

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier Njdpfswd N S Dox Akcewi -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Nwsdpfx Asy S Ez Dskcei Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light - Machine feet - Machine vice

Condition: new, Year of construction: 2026, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including Njdpfx Akjuud Irscjwi 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical System According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Nwedpfx Akofakkcscoi Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: new, Year of construction: 2026, 1. Laser Standard Description: An integrated, sandwich-platform-based plug-and-play laser source cell. • Robot: KUKA KR10 R1440-2 • Power unit: 2 kW fiber laser (optional: 3 kW) • Areas of application: 0.8 - 3 mm sheet metal, stainless steel furniture accessories, aesthetic welds that do not require seam cleaning. • Abbreviation stands for: Laser Standard • Detailed specifications: * Oscillating laser head (obstacle compensation, tolerates assembly gaps). o KUKA.LaserTech software package. o Manual turntable (180-degree rotation). o Laser safety class enclosure and SICK safety sensors. 2. Laser Advanced Description: High-precision laser cell with automatic positioning and wire feed unit. • Robot: KUKA KR10 R1440-2 • Power unit: 2 kW/3 kW fiber laser + synchronized (cold) wire feed • Application: Sheet metal with a thickness between 2 and 5 mm, aluminum castings, and designer furniture requiring high strength and filling. • Abbreviation stands for: Laser Advanced • Detailed specifications: o KUKA external axis servo rotary table operates synchronously with axis control. o Automatic wire feed motor and torch nozzle tracking system. o Integrated fume extraction and filtration system (optional). 3. CMT-Standard Definition: Fronius CMT technology is an industry-grade standard cell for spatter-free cold arc welding. • Robot: KUKA KR10 R1440-2 • Power supply: Fronius TPS 320i CMT • Application: Mass production of thin and medium sheet metal (1-5 mm), where burr formation is undesirable. • Abbreviation stands for: CMT Standard • Detailed specifications: o Robacta Drive (push-pull) torch system (for stable wire feed). o Automatic torch cleaning station (brushing + spraying + cutting). Njdsyrd Unepfx Akcjwi o Economical chassis with manual turntable. 4. CMT Plus Description: A top-tier arc welding cell with L-positioner for demanding geometries and large components. • Robot: KUKA KR10 R1440-2 • Power supply: Fronius TPS 400i CMT • Areas of application: Large chassis, complex office chair frames, components requiring multi-axis movement. • Abbreviation stands for: CMT Plus • Detailed specifications: o L-positioner (L-tilting device): Executes a tipping movement while rotating the part 360 degrees around its own axis. o KUKA.ArcTech software with "TouchSense" function (contact-based part positioning). o Extended work area cabinet.

Condition: new, Year of construction: 2025, Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml); bottle volume: 350-1500ml; PET bottles; standard 28/30mm PET caps; 1500 liter of water filling /hour; 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of machines/modules. Nsdjv Nla Ajpfx Akcjwi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic water filling system for up to 18.000 bottles per hour. - Including feeding system for empty bottles to the 40-head rotary rinser. - Rotary filling station (40 heads) with gravity filling principle. The capping unit is working with 12 capping heads and is suitable for 28 and 30mm PE standard caps. - All product contacting parts are made of SS304 or standard food package plastic. - The frame is made of high quality carbon steel Q235 (optional SS304). - MITSUBISHI PLC, WEINVIEW Touchscreen, Specifications: productivity 6.000-18.000 bottles per hour, number of rinsing heads: 40, number of filling heads: 40, 12 capping heads, bottle volume: 350-2000ml, bottle diameter: 50-90mm, bottle height: 150-310mm, filling tolerance: +/- 2%, compressed air: 0.5m³/6bar, filling water: 9m³/h, rinsing water: 3m³/h, power: 380V, 7.5kW, machine dimensions: L4300xW3400xH3050mm, 12.000kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nwjdpov Nlaiofx Akcji

Condition: new, Year of construction: 2025, Automatic water filling system for up to 4.000 bottles per hour. Including feeding system for empty bottles to the 18-head rotary rinser. Rotary filling station (12 heads) with gravity filling principle. The capping unit is working with 6 capping heads and is suitable for 28 and 30mm PE standard caps. All product contacting parts are made of SS304 or standard food package plastic. The frame is made of high quality carbon steel Q235 (optional SS304). MITSUBISHI PLC, WEINVIEW Touchscreen. - Specifications: max. speed of the machine in neutral: 66 cycles/minute; number of rinsing heads: 18, number of filling heads: 12, 6 capping heads; bottle volume: 350-2000ml; bottle diameter: 50-90mm; bottle height: 150-310mm; filling tolerance: +/- 2%; compressed air: 0.5m³/6bar; filling water: 1.5m³/h; rinsing water: 0.5m³/h; power: 380V, 3.5kW; machine dimensions: L2700xW1600xH2800mm; weight: 2.500kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nwodpfx Akov Nlacecji

Condition: used, Payload: 0/7 Kg Arm reach: 1.80 mmNumber of Axis: 6 Repeatability: 0.03 mm Robot weight: 380 Kg Mounting: Floor Nwsdpfx Akeh Au I Iecei

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Nedpfxjh Uyg No Akcjwi

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 5AC800.EXT1-00 keyboard + 5AC800.EXT3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nsdex Equ Nepfx Akcswi

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, For sale is an R. Beck multi-level gluing press in a robust industrial design. This machine is ideally suited for efficient carcass, frame, and panel construction, as well as for a wide range of gluing applications in carpentry and furniture making. The 5 independently operated press levels allow for the simultaneous processing of multiple workpieces, resulting in high productivity. Njdpozm Slvofx Akcewi Technical data: Manufacturer: R. Beck Maschinenbau Year of manufacture: 1997 Usable length: 2,000 mm 5 press levels Operating pressure: 6 bar CE version Machine no.: 270 Equipment: Pneumatic multi-level gluing press 5 press levels, individually selectable Pneumatic pressing Multiple clamping cylinders per level Even pressure distribution Control panel with individual control of the press levels Mobile base frame Robust industrial design Ideal for carcass, frame, and panel gluing Application areas: Furniture manufacturing Carpentry Joinery Carcass gluing Frame gluing Panel gluing Series production Condition: The machine is in used, well-maintained condition with the usual signs of wear and tear consistent with its age. Thanks to its robust construction, it is ideally suited for professional use in crafts and industry. Inspection and test run are possible at any time by appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: used, empty load weight: 8,850 kg, maximum load weight: 25,150 kg, overall weight: 34,000 kg, first registration: 06/2017, loading space length: 13,400 mm, loading space width: 2,470 mm, loading space height: 2,650 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65R22,5, color: white, gearing type: other, front tire size: 385/65R22,5, rear tire size: 385/65R22,5, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, tail-lift, Lamberet freezer semi-trailer - Carrier Vector 1550 - Refrigeration unit: Carrier Vector 1550 - Dimensions (LxWxH): 13.34 x 2.48 x 2.67 m - Disc brake - Aluminum floor - Electricity Nwjdpfx Akozpat Hjcsi - BPW axles - Temperature recorder - FRC/ATP 2026 - Tires: 385/65R22.5 Very good condition, export price! Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and selling extend beyond national borders, which is why you will generally find the export price in our listings, as this is independent of the location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the provisions contained in the purchase contract are decisive. Subject to changes, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: ready for operation (used), SEW WF20 CMP50S/BP/KY/AK0H/SB1 worm gear motor, serial number 01.1896603719.0002X13, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nsdpfjy T Utlex Akcjwi

Condition: new, SEW Eurodrive WF20 DRS71S4BE05HR/ASE1/TF/AS7Y / 01.6631334201.0001.19 Gear motor SN: MK117826,unused, 100% functional, scope of delivery as per photos Nwsdpforhbdfex Akcoi

Condition: ready for operation (used), Siemens 6FM1706-3AA20 Positioning/Counting Module WF706, E-version A / 3, SN: 11272, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nodpfx Akji Ed H Dscswi

Condition: new, Siemens 1FT6084-8WF71-4EH1 synchronous servo motor / IP 65 SN: Y8423837415001, unused in opened original packaging, 100% functional, scope of delivery as per photos Nwsdpfxevl U Emj Akcji

Condition: ready for operation (used), SEW WF10 CMP40M/BP/KY/AK0H/SB1 worm gear motor, serial number 01.1909224001.0001X13, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwedpfx Akey T Uruecsi

Condition: ready for operation (used), SEW WF20 CMP50S/BP/KY/AK0H/SB1 worm gear motor, serial number 01.1896603719.0001X13, used, in good condition, 100% functional, scope of delivery as shown in the photos. Njdpfx Asy T Utfjkcowi

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Test Unit Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion test unit / salt spray chamber for salt spray, condensation, and combined tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: Nwodpjzba N Tjfx Akcji S Watts: 2800 W K Watts: 2150 W B Watts: 500 W W Watts: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption for humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling for bottom trough system: approx. 15 liters Test procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used unit from industrial application. Optical condition as shown in the pictures. Inspection possible by appointment. Scope of delivery: (See picture) Shipping or freight forwarding possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.