Used Gm Mechanic Lathe for sale (12,232)

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Hedpfx Aevrfivebgjp

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Hsdpfxewg E D Ie Abgep

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A - 50 Hz Hedpolatz Dsfx Abgjp - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Year of construction: 2026, condition: new, functionality: fully functional, FIRE PREVENTION SYSTEM FOR DUST COLLECTION AND AIR FILTRATION SYSTEMS Components for spark detection and extinguishing systems in dust collection air intake ducts. Configurable systems for spark detection and water-based extinguishing in ducts. Detection, extinguishing, and compartmentalization systems for dust collection and air filtration systems. DESIGN, SALES, INSTALLATION, AND PERIODIC MAINTENANCE Hjdezfiz Sjpfx Abgsp

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Hsdpfx Aboy Shyisgjp

Condition: new, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 [mm] -Bar passage extension on request 25 [mm] - Cross carriages : 4 (pos.1-2-4-5) - Maximum feed length: 100 [mm] - Main spindle speeds : 400 - 4000 [rpm] with threading,400- 5000 [rpm] without threading - Travel time: 0.7 [s] - Cycle time: 1.4 - 60 [s] - Power: 11 [KW] ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT consisting of theAC motors (protection type lP 54), main motor and feed with a PLC programmable Siemens S7-1500 DOCUMENTATION: CE certification with manuals Hedpfxeq Nzl To Abgep Wiring diagrams I Hard copy + 1 Copy on USB with files in .pdf format EC Directive 2006142lCE - 2014130/EC 2O14I68IUE STANDARD

Condition: used, Year of construction: 2001, Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner. Additional title: PET bottle ejection system Capacity: 4000 crates/h Power: 2,8 kW Current: 8 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar, 1 m³/h Length: 3000 mm Width: 1910 mm Height: 3830 mm Weight: 2500 kg Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Operation / Control: Simatic S7-300 Hjdox T Ayyopfx Abgjp Material: stainless steel Position: free standing Base construction: Stainless steel square tube construction on spherical feet Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

Year of construction: 1993, condition: used, Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph Additional title: Single-ended machine Capacity: 21000 bo/h Bottles each row: 16 bo/row Length: 8,64 m Hjdpfovcqgzsx Abgop Width: 4,47 m Height: 1,92 m Weight: 17900 kg Formats: 0,5 l NRW-Bottle Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank Periphery: S5 controll (HMI Lauer)

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Hjdpfxjylpvds Abgjp Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) Hjdpfx Asx I A Hcsbgjp • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Hsdpfx Abel Hx Adegep

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Hodpfx Ast Ul Exobgjp

Condition: good (used), Toolholders bought in company where used for Biglia machine Hsdpfx Abjyuyhiegjp

Condition: like new (used), Year of construction: 2018, GM - FB330 Finishing Solution Hedpfx Abevvmnnogsp Year of Manufacture: 2018 _____ Machine Specifications and Equipment: HIGH-PRECISION FINISHING MACHINE  Max. web width 330 mm  Min. web width 50 mm  FLAT BED HOT FLOW PRESS UNIT  Speed 6000/H embossing or 10-15m/min  Web width 110mm - 330mm  Substrates 50-200um  Label paper 60-120 g.  UPM Vellum natural wine paper. RAFLACOAT RP48AT semi gloss paper  All other substrates must be tested by GM  Polymer (blind embossing ONLY)  Sheet thickness: 5-10mm. 7mm is standard  Backing plate, self-adhesive rubber (1-3mm). SH65  Plate size and type 304.8 x 330mm. 5-9mm magnesium  Plate pressure 30 tons  Foil feed transverse and longitudinal direction (rotating tower)  Temperature contr. 80°-130°C  Heating time 20 min.  SCREEN PRINTING UNIT  Speed 4000/h overlays or 5-15 m/min.  Web width 110mm - 330mm  Frame size 660mm x 500mm  Frame type 30mm x 30mm aluminum frame  Print area 330mm (length) x 330mm (width) MACHINE: Fully servo-driven line with web tension control. Modular design can be equipped with e.g. hot air drying and inkjet, etc. Modern single-sided housing for easy retraction and maintenance. 1. UNWINDER 2. WEB EDGE CONTROL 3. FLAT BED SHEET IMPACT UNIT 30 ton high precision flatbed unit delivers superior blind embossing and hot foil quality Servo Drive System ensures consistent pressure and embossing time at all speeds Integrated foil saving function Swivelling foil tower can be used on both sides A single module for blind embossing and/or flatbed hot foil The system uses magnesium, brass/sheet metal or polymer plates Plates can be changed while hot using a carriage system 4. SCREEN PRINTING UNIT Servo register system for print marks or optional label distance sensor Pneumatic squeegee with servo movement 5. REWINDER Rewinder for roll diameters of Ø600mm (depending on job/material) Electronic control of speed, position and torque Automatic control of the rewind tension for every speed and all rewind diameters Pneumatically replaceable rewind shaft Ø 76mm Inner and outer winding

Condition: used, Year of construction: 2007, Cleaning machine, manufacturer GM Gera, model: Arcade GEK2.1RV1, for 4,000 bottles/hour, 9 bottles/row, for 0.5 l NRW bottle, cell pitch 95mm, with pre-diverter, caustic bath 1+2, hot water bath 1+2, cold and fresh water spraying. Contact us for further information. Hsdpfjxghnasx Abgep

Condition: used, Year of construction: 2003, Cleaning machine, manufacturer: GM Gera, type: Arcade, for 24,000 bottles/h, adjustable range 7,600 – 26,400 bottles/h 25 bottles/row Hodpeyzdq Nefx Abgjp basket pitch 95 mm, chain pitch 140 mm with Siemens S7 control system dismantled, available for inspection at warehouse

Year of construction: 2007, condition: ready for operation (used), A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026. Hsdpfx Aoxfbczjbgsp

Condition: ready for operation (used), Year of construction: 2018, A Grafisk Maskinfabrik roll-fed labeling machine with integrated printing system is available. Web width: 330mm, web speed: 100m/min, rewind reel min./max.: 25mm/73mm, substrate thickness min./max.: 40g/300g/m², torque: 10Nm-100Nm, max. reel diameter: 250mm, machine weight: approx. 1300kg. Documentation available. On-site inspection is possible. Hjdpfx Aswufzcjbgop

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Hsdjwb E S Ijpfx Abgop

Condition: good (used), Year of construction: 2013, • Model: GM DC5V8-BXE • Year of Manufacture: 2013 • Web Width: 200 – 520 mm • Substrate Thickness: 20 – 200 microns • Machine Speed (Semi-Rotary): up to 55 m/min Unwind & Web Control • Unwind unit with max. 700 mm diameter • BST web guiding system with splice table • Touch screen control panel Printing & Surface Treatment • Servo-controlled flexographic printing unit • UV curing unit • Vetaphone corona treatment unit Finishing & Converting Modules • Laminating unit • Die-cutting unit, die plate size 50.8 – 520.7 mm • Magnetic cylinder: Z 200 • Semi-rotary die cutting • Slitting unit • Waste rewind up to 500 mm diameter • 2× rewind stations Integration • Pre-installed buffer system for Xeikon digital press Hodpfx Abox Hab Ujgep (Ideal for inline or near-line workflow)

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Hsdsx Hh A Hopfx Abgep Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. Hjdpfx Abjxz Tfasgop - Works great

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Hjdpfxsy D E Ris Abgop Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm Hodpfxsxdmgvj Abgjp CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Hsdpfxozdqdfs Abgjp Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.