Used Guideline for sale (196)

Condition: like new (used), GIF Kitchen Ventilation Ceiling Ventilation Ceiling System The optimal solution for kitchen ventilation, commercial kitchens, and the food industry. Ledjt Hglkjpfx Ah Sjru The best alternative to extractor hoods GIF kitchen ventilation ceilings are installed in: • Company canteens • Hospitals, clinics • Restaurants / hotels • Retirement homes, homes for the disabled, and children • Military accommodations, field kitchens • University cafeterias, school kitchens • In-flight catering • Correctional facilities • Public facilities Patented quality – Made in Germany The GIF kitchen ventilation ceiling is a complete, wall-to-wall, surface-active solution including large-area exhaust and supply air panels, lighting, and compensation surfaces with an installation height of just 200 mm. The use of the ceiling cavity as a pressure chamber in accordance with VDI 2052 enables implementation as an "open" or "closed" system, always maintaining the largest possible proportion of air-active surfaces. The large-scale capture of frying, cooking, and other fumes, as well as the large-scale, low-turbulence supply air intake, guarantee a comfortable climate free from condensation and drafts. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. On the supply air side, the GIF active cassette ceiling is used for low-turbulence, large-scale supply air intake according to the stratified flow principle. An energy-efficient solution is thus standard. The special design ensures indirect supply air guidance, even for high air volumes at low inlet velocities, without an induction pulse. Since the active cassettes are identical in the exhaust and supply air areas, they can be interchanged at will. Facts and Benefits Complies with or exceeds current guidelines (VDI 2052, VDI 6022, EN 16282), including accessibility to underlying components (no access openings required). Durability of the material: CNS 1.4301 Integrated deflection system for rapid pulse reduction Economical and hygienic cleaning of only 4 parts per m² in the dishwasher Pulling and pushing of the active cassettes in the support profiles makes them easy for anyone to remove without tools Partial cleaning possible as needed No need to climb onto greasy, hot kitchen appliances (risk of slipping) HACCP-certified process Technical Specifications Exhaust Air Air flow rate: 260-300 m³/h m² Separation efficiency: up to 97% Dimensions: 500×485 mm Pressure drop: 20-25 Pa Material/Surface: CNS Material No. 1.4301 Weight per m2 without support structure: 10.00 kg Draft air flow: 360-500 m3/h m2 Dimensions: 500×485 mm Pressure drop: 25-30 Pa Material/Surface: CNS material No. 1.4301 Weight per m2 without support structure 10.00 kg Airflow velocities: less than 0.2 m/s Ceiling area: 6500 x 3000 mm 19.50 m² 300 supply air flat ceilings, 250 x 485 mm 200 supply air flat ceilings with sound absorption, 250 x 485 mm 220 active cassette ceilings, 500 x 485 mm 14 system support profiles, 6500 mm 7 system support profiles, 2000 mm Lighting fixtures installed flush with the ceiling in the GIF ventilated ceiling Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: refurbished (used), Year of construction: 2015, operating hours: 180 h, functionality: fully functional, machine/vehicle number: H5KS, Universal testing machine, type H5kS Extended version by 254 mm With 5KN 500N load cells, screw-type clamping device up to 5kN, and Windows 10-11 software For tensile, compressive, bending, and shear testing, etc., in accordance with EN ISO 7500-1, ASTM E4. The H5kS is a universal testing machine designed according to the latest standards. The machine operates in accordance with the relevant EU radiation protection and safety guidelines (EN 50081-1, 72/23/EEC, EN 61010-1). The maximum voltage within the machine is 48 volts. Special features: • Large, easy-to-read liquid crystal display with backlight • Graphical or numerical display mode • Alphanumeric file input • Speed range 0.001 to 1000 mm/min (2.5kN) • Speed range 0.001 to 500 mm/min (5kN) • High return speed 0.001 to 1500 mm/min • Precise crosshead positioning • Robust load frame • Output of test results with mean value and standard deviation via printer • Wide selection of testing software under Windows for various standards • RS232 interface for use with computer systems Lredpfx Ahozt S Hme Sou • Accuracy of the force display of the load cell: 0.5% across the entire range • Accuracy of the displacement display: 0.001 mm • Equipped with a force and displacement alarm system • 32-bit motor controller • 20% digital weight adjustment during calibration of the load cell capacity • Automatic motor alarm for over- or undervoltage and overheating Specifications: • Force measurement accuracy: +/- 0.5% of the displayed force in the range of 2% to 100% • Accuracy of position measurement: +/- 0.01% or 0.001 mm • Accuracy of speed: +/- 0.005% of the selected speed • Operating temperature: 0 to 38°C • Humidity range: 10% to 90% Technical data: • Single-column table model • Maximum load: 5kN in tension and compression • Maximum travel: 1004 mm without clamping device • For further details, please refer to the brochure. Dimensions: Height: 1394 mm Width: 490 mm Depth: 450 mm Weight: 102 kg Connection: Machine: 50-60 Hz - 2000 W Power supply: 220/240VAC

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 830397, functionality: fully functional, power: 85 kW (115.57 HP), temperature: 1,000 °C, inner dimension length: 1,600 mm, inner dimension width: 700 mm, inner dimension height: 950 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in a large German corporation, adhering to applicable guidelines and maintenance recommendations. ACQUISITION COSTS Original purchase price in 2008: €490,000 plus VAT Retrofit in 2022: €254,000 plus VAT TECHNICAL DETAILS Dimensions of the heat treatment unit Housing width, including control cabinet: 3,600 mm Overall length with attachments: 7,000 mm Height above furnace floor: 4,900 mm Loading height above furnace floor: 1,200 mm Pit depth: 630 mm Internal height of the furnace chamber: 950 mm Internal depth of the furnace chamber: 1,600 mm Ledpfx Ahoy Uxt Ej Sjru Internal width of the furnace chamber: 700 mm Temperatures Rated furnace temperature: 1,000 °C Operating furnace temperature: 850 °C Oil bath temperature: 60 °C Dimensions of the furnace control cabinet Width: 2,000 mm Depth: 600 mm Height with 100 mm base: 2,100 mm Weights and Volumes Weight of multi-purpose chamber furnace: 22,000 kg Oil bath volume: 7.5 m³ Weight of switchgear: 600 kg Total weight of furnace with oil and charge: 30,000 kg Energy Data Total connected load: 85 kVA Supply voltage: 400 V Supply frequency: 50 Hz Number of phases: 3 Oil bath heating: 2 x 21.6 kW Motor power, heating chamber circulation fan: 5.5 kW Motor power, pre-chamber circulation fan: 2.2 kW Motor power, oil bath air cooler: 3.0 kW Motor power, lifting table: 11 kW Motor power, loading machine: max. 38 kW Current draw, pre-chamber door: max. 17.2 A Current draw, heating chamber door: max. 13.2 A Motor power, combustion air fan: 1.5 kW Motor power, oil bath pump for oil bath: 2.2 kW Motor power, cooling air blower: 0.75 kW Motor power, oil bath circulation fan: 2 x max. 11 kW Motor power, oil bath pump for cooling plates: 1.1 kW Motor power, batch oil circulation pump: 3 kW Batch dimensions with base grate Height: 950 mm Width: 700 mm Length: 1,600 mm Weight: 1,000 kg Note: The dismantling and loading of the furnace must be organized by the buyer.

Condition: used, axle configuration: 3 axles, first registration: 10/2023, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beams with welded crossmembers. Chassis width 1,600 mm Axles and suspension: Disc brake 430 mm "off-road version" JOST (formerly DCA) axle units, 3 x 9 tons, with air suspension, air bellows arranged centrally to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board info center, lifting/lowering valve, BVA brake wear indicator Lodpfxs Adxg Ej Ah Soru Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approx. 60% tread, with steel rims 11.75 x 22.5 ET 120, UNI wheel bolts, aluminum rims Kingpin: 2" - screwed into an 8 mm thick plate "light" Landing gear: Landing gears with two speeds, 2x 20 tons support load. We use swivel feet for air suspension. Braking system: According to E.E.G. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability System), Wabco Smartboard info center, Aluminum air tank system Electrical system: According to the guidelines of the STVZO (German Road Traffic Licensing Regulations) with 2 five-chamber lights, type Aspöck, 24-volt system with 2x 7 and 1x 15-pole socket with side marker lights, 2 sep. LED reversing lights 1 LED inside on the front wall All air and electrical lines are neatly routed in plastic pipes! Tipping body/dump bed: Fully welded interior Aluminum dump bed, side walls made of 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide, bottom made of 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall reinforced, 4 mm, in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALU round profile for sealing the door gap welded to the rear doors on the side and bottom, rear doors partially covered with smooth aluminum, operation of the universal door automatically-pneumatically with a separate lever that can be locked, rear support outriggers made of ALU, swiveling, two tie-down straps with rubber buffers attached to the frame on the front wall of the tipping bed, Hydraulic system: Tipping cylinder with "small" housing Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufacturer Edbro with approx. 2.5 m hydraulic hose and coupling half 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder made of aluminum, side underrun protection on the right in a foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additional centrally mounted support holder for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr./m2 quality with tarpaulin system, circumferential rubber cord in the rear end of the tarpaulin to be attached with two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord to prevent water ingress, robust foldable underrun protection made of aluminum, 2 "Clear- Pass" splash guards on the fender according to EG standard, an aluminum grain chute with a tarpaulin bag attached to the side

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 8,900 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 49 m³, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and suspension: 430 mm disc brake "off-road version" JOST (formerly DCA) axle assemblies, 3 x 9 tons with air suspension, air bellows in a central arrangement on the chassis longitudinal member. 1st axle can be lifted with starting aid and manual forced lowering, Smart Board infocenter, lift/lower valve, BVA brake wear indicator Tires and wheels: 6 wheels with tires size 385/65 R 22.5, approximately 60% tread, with steel rims 11.75 x 22.5 ET 120, universal wheel bolts for aluminum rims Kingpin: 2" screwed into an 8 mm thick plate "light" Landing gear: Landing gear with two speeds, 2x 20 tons support load for air suspension, we use swivel feet Braking system: According to E.E.G. standard, dual-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, Aluminum air tank system Electrical system: According to STVZO guidelines with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x 15-pole socket with side marker lights, 2 separate LED reversing lights 1 LED work light inside at the front All air and electrical lines are neatly routed in plastic pipes! Lrodpfx Aho Adxg So Seu Tipping body/dump body: interior fully welded Aluminum dump body, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide, welded, floor 6 mm thick, highly wear-resistant alloy (5383H34/HB 110) with 45-degree angled profile to the side wall, front wall 4 mm thick, reinforced in an angled design, rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 design with a grain slide, ALURound profile for sealing the door gap on the rear doors, welded on the side and bottom, rear doors partially clad with aluminum, operation of the universal door automatically-pneumatically with a separate lever, lockable, rear supports made of aluminum, swivelable, two lower retainers with rubber buffers on the tipping body attached to the frame on the front wall Hydraulic system: tipping cylinder with "small" housing, suspension Hydraulic cylinder mounted on the front wall with a working pressure of 150 bar, manufactured by Edbro with approximately 2.5 m hydraulic hose and male coupling 1", tipping angle approx. 48 degrees Accessories: 6 Parlok fenders, complete splash guards over the entire vehicle width attached to the U-shaped protection, without spare wheel holder, aluminum, side underrun protection on the right in foldable design, toolbox type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel supports in the middle, raised by approx. 150 mm, additionally, a centrally mounted support receiver for positioning a total of 2 supports to increase the loading width, tarpaulin with a central light strip and separate reinforcements in the wear areas, quality approx. 660 g/m2 with tarpaulin system, continuous rubber cord in the rear end of the tarpaulin to be attached to two tension hooks on the swivel support at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin end at the rear with welded rubber cord against water ingress, robust foldable underrun protection in aluminum, 2 "Clear- Pass" splash guards on the fender according to EC standard, an aluminum grain chute with tarpaulin bag attached to the side on the frame, holder for shovel, broom and scrape

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, made of galvanized steel up to the support structure (semitrailer construction, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BWI) readable in the central control unit (CCU) (display), 1st axle with starting aid (new EC regulation, without CCU option). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5, offset 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with pivoting foot. Braking System: According to EC standards, EBS E system Wabco with RSS (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lights, Aspöck Europoint 3 type, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-shaped protection. Body/Container: Body completely welded on the inside, reinforced side walls. Ledpfxoz S St Ne Ah Seru Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum container, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt. Plank profiles completely welded on the inside. Floor as a sliding floor system laid on 140 mm ALU cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special ALU corner profiles in a beveled design. Smooth rear wall in a straight design with 2 ALU wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in a welded ALU rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving discharge wall with Kevlar cover, approx. 1,800 mm long, plus side Kevlar seal. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders, plus anti-lifting glide bearings, type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed stops on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed stops. Line size NW 21. Fixed stops with a size and design to be specified. Operating pressure 190-max. 240 bar. ALU end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, waterproof box. Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU wheel chock, side ALU impact protection in a folding design, 1 toolbox approx. 860x460x400 mm in p

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 04493, functionality: fully functional, temperature: 1,100 °C, inner dimension length: 2,000 mm, inner dimension width: 480 mm, inner dimension height: 300 mm, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. Used in accordance with applicable guidelines and maintenance recommendations in a large German corporation. High-performance high-temperature furnace for industrial heat treatment and manufacturing processes. TECHNICAL DETAILS Maximum temperature: 1,100 °C Heating chamber (L × W × H): 2,000 × 480 × 300 mm Lodjzyf Taepfx Ah Soru MACHINE DETAILS Electrical connection: 380 V Fuse rating: 125 A Power: 35 kW Dimensions (L × W × H): 2,500 × 1,000 × 1,700 mm Connection: III EQUIPMENT Mounted on a chassis with rollers CE marking Note: EXW – Buyer is responsible for organizing disassembly and loading.

Condition: new, mileage: 500 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 540 8x2 with EFFER Crane Truck: • FH 8x2R NLA air suspension • Application cycle: Long-distance transport • Predominantly flat topography • Gross combination weight, technical: 60 t (observe towing capacity of drawbar coupling!) • Rear-view mirrors for body width 2600 mm Main Components • Chassis height: MED (medium) • Trailing axle, electro-hydraulically steered, single tyres • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • Globetrotter safety cab FH • Wheelbase: 4,900 mm • Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation • Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm • Volvo Engine Brake+ (VEB+) (meets ADR braking regulations) • I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm • Liftable axle • Rear axle RSS1370C, axle load 13 t, GCW 70 t, differential lock • Drive axle ratio 3.08:1 Chassis • Air suspension on front axle(s) • Lifting on front axle air suspension: Basic (more ground clearance, reduced lift range) • Front axle load max. 20 t (technical) for double front axle • Rear axle load max. 23 t (technical) • First trailing axle 10.0 t • Volvo Dynamic Steering (VDS) including Stability Assist • Disc brakes, solid discs • EBS, Electronic Braking System, Medium package • AGM batteries, 2 x 210 Ah • 275 l fuel tank, left (plastic) • AdBlue tank, usable capacity 57 l (between the front axles) Trailer / Coupling • Rockinger 400 G-150 drawbar coupling (observe D-value/max. trailer load!) • Electrical connection for semi-trailer/trailer, 15-pin (ADR possible) • Duomatic coupling Wheels and Tyres • Dura-Bright EVO aluminium rims (polished) • FA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • DA Tyres 315/80R22.5 (Continental Conti Eco HD5, 3PMSF) • NLA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • Tyre pressure monitoring with internal sensors Lredpjz Rkrzefx Ah Sju Crane • Effer E-9 Jib.155Q-6 JDC • JIB • Winch Body • All necessary chassis work for crane installation, including vehicle frame modification. • Compliance with body builder guidelines of the relevant chassis manufacturer for all work. • Complete installation of a specially developed auxiliary frame from high-tensile steel. • Welded and bolted auxiliary frame for high torsional rigidity and optimum stability (unique feature). • Supply/installation of front support legs • Assembly/bolting of the crane and main support, including installation of all hydraulic and electrical connections. • Usable as a tractor unit via removable/sliding Jost fifth wheel (JOST JSK SL), superstructure removable. • Removable flatbed body as high-profile welded steel construction (approx. 4,250 mm x 2,480 mm, A-dimension open). • Flatbed equipment: Container locks, Multisafe/Multifix stanchion pockets and retractable lashing eyes (2,500 daN / 6,500 daN). • Removable aluminium drop sides and rear underrun protection (extendable) incl. additional/front support. Further information on request.

Condition: used, Thermo Fisher Type: ARL easySpark metal analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate processing of data sets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional In new condition Year of manufacture: Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality, but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grating/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples. A groundbreaking spark excitation and optical design to ensure the best performance in its class. An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation. A robust and reliable design that requires minimal maintenance. Compliance with safety and quality guidelines. A simple design that is suitable for both new users in production and experienced laboratory personnel. The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See image) Lodpfxjziar Ns Ah Soru (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Lrsdpfx Ajzhdk Tjh Seu Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Lrjdpfx Aezhdldoh Sou Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, ME-Pressen Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm Lrodpswgakvsfx Ah Ssu For sale is a hydraulic portal straightening press from ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and is equipped with an integrated tooling clamping device as well as parallel control for bending blades. Thanks to its movable table, sliding cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 500 t ==== General Specifications - Manufacturer: ME-Pressen - Model: Portal Straightening Press - Design: Gantry press - Machine type: Sliding table press / Straightening press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 ==== Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm ==== Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outward - Table in grid construction - Cylinder horizontally traversable via rack and pinion ==== Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s - Pressing speed: depending on load ==== Hydraulics & Performance - Pressure setting: 80–500 t via rotary control - Pressure build-up time: max. 3 sec. - Free breakout force: max. 800 kN - Oil temperature monitoring available - Lubrication via grease nipples ==== Construction & Features - Integrated tool clamping device - Parallel holding for bending blade - Induction-hardened cylinder - Machine body powder-coated / double painted - T-slots to customer specification ==== Operation & Safety - Remote control - Robust construction for industrial applications ==== Accuracy - Deflection: ≤ 1.2 mm/m (at 70% load) ==== Straightening operations, bending processes, toolmaking, series production, heavy-duty forming Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are constructed according to German machinery guidelines as well as European Machinery Directive (2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our core strengths are special purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: used, axle configuration: 3 axles, first registration: 09/2025, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Superstructure: Self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Crossmembers, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure. (Semi-trailer construction max. GVWR up to 39,000 kg) Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) readable in the central control unit (display), 1st and 3rd axle lift including Optiturn and Optiturn. 1st axle with starting aid (without central control unit), tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors. Tires and Wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims, silver, 11.75x22.5 ET 120. King Pin: 2" bolted into a 10 mm thick plate. Braking System: According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator. Spring brake system acting on two axles with operation at the rear. Aluminum compressed air system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lamps, type Aspöck Eco LED 3, integrated in the aluminum rear panel. 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile. Audio alarm when reversing. Lodpfjz S St Aox Ah Seru Superstructure/Body: Body fully welded inside. Reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt. Plank profiles fully welded inside. Floor laid as a sliding floor system on 140 mm aluminum crossmembers, floor load capacity approx. 9 tons/m2. Crossmembers mounted close together (approx. 350 mm). Aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design. Special aluminum corner profiles in a beveled design. Smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in the welded aluminum rear frame on Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Hard wear plates on the side walls, approx. 2,000x1,500x4mm, fully welded. Sliding residual discharge wall with Kevlar sheet, approx. 1,800 mm long, plus side Kevlar sheet seal. Service door on the left in the front wall, opening inwards. Hydraulic System: "Cargo - Floor" sliding floor system. Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed brackets on the front wall. Separate possibility for connecting the hydraulic line under the vehicle with fixed brackets. Line size NW 21. Fixed brackets with dimensions and design to be specified. Operating pressure 190-max. 240 bar. Aluminum end pieces welded into the sliding floor. Electrical control integrated in a lockable, watertight box on the l

Condition: good (used), Year of construction: 2013, 1 laser system with 1 loading station, 2 nests each - Up to 4 welding fixtures - Laser power: 3.3 kW - Beam source: Trumpf Trudisk 3302 disk laser - System manufacturer: Sitec - Operating hours: approx. 70,000 h - Max. workpiece dimensions: approx. 300 x 100 x 100 mm - Larger workpieces possible - Beam guidance via laser light cable (LLK) - Laser welding with Trumpf BEO D 70 welding optics on one axis system. - Inline laser monitoring system for weld seam monitoring - Welding speeds: up to 5600 mm/min - Welding penetration depth: 1.5 mm - Welding with shielding gas possible! For aluminum or stainless steel - Fixtures can be water-cooled! - 2 rotary axes per table side, individually programmable Lrjdpfowm I H Ssx Ah Ssu PROGRAMMING: 4 cylinder clamping circuits per tool 10 inputs via slip ring rotary distributor 8 additional inputs per tool via radio system Inputs freely configurable via user interface (end position / part control / setup control) Clamping and release programs and part queries fully programmable via NC program No PLC programming required System fully programmable via Siemens control (G-code) Laser programmed via Trumpf TruControl and called via Siemens control (G-code). Output Guidelines T 1: 2 weld seams (each 100 mm in diameter, weld penetration depth = 1.5 mm) 2 components per side of the table approx. 250 parts per hour T 2: 17 weld seams (each 10 mm in diameter, weld penetration depth = 1.2 mm) 2 components per side of the table approx. 190 parts per hour The system can be viewed live!

Condition: used, mileage: 1,850 km, power: 130 kW (176.75 HP), first registration: 03/2026, fuel type: diesel, overall weight: 3,500 kg, color: other, number of seats: 3, loading space volume: 12 m³, loading space length: 3,450 mm, loading space width: 1,780 mm, loading space height: 1,930 mm, construction height: 2,590 mm, working width: 2,040 mm, Equipment: ABS, airbag, central locking, cruise control, differential lock, immobilizer system, second-hand vehicle warranty, sliding door, H3 high-roof, central locking, electrically adjustable and heated exterior mirrors, hill-start assist, lane-keeping assist (Lane Assist), emergency braking assistant (Front Assist), driver alertness and fatigue warning, speed control system (cruise control), speed limiter with predictive control, multifunction steering wheel, front and rear parking sensors, rear-view camera system with dynamic guidelines, partition wall, spare wheel, all-season tires, LED headlights, LED daytime running lights, DAB+ digital radio, comfort telephony with LTE and wireless charging, tire pressure monitoring system (TPMS), driver airbag, driver and passenger airbags, ABS, ESP with ASR and electronic differential lock, start-stop system with brake energy recovery, sliding door on the right, immobilizer, on-board tools and jack, 6-speed manual transmission, 12V sockets, 130 kW (177 hp), 5t registration, 4 speakers, AGM battery 92 Ah, passenger double seat with storage compartment, Candy White, roof rack with storage compartments, digital instrument cluster, electronic parking brake, cab doors, rear hinged doors without windows, Keyless Go, fuel tank 75 l, LED interior lighting, L3, MAN Connect, MAN Media Van 10.4 inches, MAN SmartLink, multifunction front camera, ErgoComfort driver's seat, crosswind assist, front bumper in gray with painted trim, USB Type-C, traffic sign recognition, tie-down points in the vehicle floor Financing example * Cash price: 40,579.00 Euro * Down payment: 8,116.00 Euro * Term: 60 months * Net loan amount: 32,463.00 Euro * Effective annual interest rate: 6.49 % * Nominal interest rate (fixed) p.a.: 6.30 % * Gross loan amount: 37,933.00 Euro Lrjdpfx Ahjz Hpu Eo Ssu * Monthly rate: 632.00 Euro *Representative financing example from Targobank AG, Kasernenstr. 10, 40213 Düsseldorf for private customers, for which the car dealership acts as a loan intermediary in an advisory capacity. Subject to credit approval. The information also corresponds to the 2/3 example according to § 6a para. 3 PAngV. Over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. The listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an additional charge. Export license plates available on site. Trade-in of your old vehicle. Retrofitting of: - Trailer couplings, also up to 3500 kg possible - Auxiliary heaters - Screen for reversing camera and/or navigation via mobile phone (Android Auto) - Reversing system with rear camera - Workshop equipment - Cruise control - Retrofitting of a tailgate lift and other individual solutions for your business needs possible for an extra charge.

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h Ledpfx Ajzcaufjh Ssru - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, load capacity: 200 kg, lifting height: 8,000 mm, Vertical Mast Work Platform with Jib JLG Model: TOUCAN 10E Year of manufacture: 2011 Load capacity: 200 kg Platform dimensions: approx. 0.9 x 0.70 m Transport dimensions: approx. 2.82 x 0.99 x 1.99 m Weight: approx. 2990 kg Working height: approx. 10.10 m Platform height: approx. 8.10 m Outreach: approx. 3.36 m Ledpfx Ahsyvyb He Ssru Drivable up to a working height of 10 m UVV (safety inspection) new Shipping is not a problem. Machine location: 94244 Teisnach (See images for current condition.) Prior inspection is expressly encouraged; simply leave your phone number via email and I will get back to you to arrange a viewing appointment. Subject to prior sale. All information is given without guarantee. Machines can be collected by the buyer or shipped by freight carrier at the buyer's expense. Loading and packaging can be organized by us. The indicated shipping costs are guidelines; actual costs may vary according to distance and unloading capability—please inquire. The specified sales price is the gross final price including VAT. An invoice with VAT shown will be issued. Warranty Basis: Due to age and wear, the sale is exclusively to commercial buyers without any warranty, guarantee, or return right. All information without guarantee. The buyer accepts this upon placing a bid. If the item offered is used, the warranty is 12 months if the buyer is a consumer under §13 BGB. If the buyer is an entrepreneur under §14 BGB, any warranty is excluded. If the item offered is new, the warranty is 24 months if the buyer is a consumer under §13 BGB. If the buyer is an entrepreneur under §14 BGB, the warranty is 12 months.

Condition: new, mileage: 500 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 540 8x2 with EFFER Crane Truck: • FH 8x2R NLA air suspension • Application cycle: Long-distance transport • Predominantly flat topography • Gross combination weight, technical: 60 t (observe towing capacity of drawbar coupling!) • Rear-view mirrors for body width 2600 mm Main Components • Chassis height: MED (medium) • Trailing axle, electro-hydraulically steered, single tyres • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • Globetrotter safety cab FH • Wheelbase: 4,900 mm • Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation • Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm • Volvo Engine Brake+ (VEB+) (meets ADR braking regulations) • I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm • Liftable axle • Rear axle RSS1370C, axle load 13 t, GCW 70 t, differential lock • Drive axle ratio 3.08:1 Chassis • Air suspension on front axle(s) • Lifting on front axle air suspension: Basic (more ground clearance, reduced lift range) • Front axle load max. 20 t (technical) for double front axle • Rear axle load max. 23 t (technical) • First trailing axle 10.0 t • Volvo Dynamic Steering (VDS) including Stability Assist • Disc brakes, solid discs • EBS, Electronic Braking System, Medium package • AGM batteries, 2 x 210 Ah • 275 l fuel tank, left (plastic) Ledpfx Aez Rkrueh Seru • AdBlue tank, usable capacity 57 l (between the front axles) Trailer / Coupling • Rockinger 400 G-150 drawbar coupling (observe D-value/max. trailer load!) • Electrical connection for semi-trailer/trailer, 15-pin (ADR possible) • Duomatic coupling Wheels and Tyres • Dura-Bright EVO aluminium rims (polished) • FA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • DA Tyres 315/80R22.5 (Continental Conti Eco HD5, 3PMSF) • NLA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • Tyre pressure monitoring with internal sensors Crane • Effer E-9 Jib.155Q-6 JDC • JIB • Winch Body • All necessary chassis work for crane installation, including vehicle frame modification. • Compliance with body builder guidelines of the relevant chassis manufacturer for all work. • Complete installation of a specially developed auxiliary frame from high-tensile steel. • Welded and bolted auxiliary frame for high torsional rigidity and optimum stability (unique feature). • Supply/installation of front support legs • Assembly/bolting of the crane and main support, including installation of all hydraulic and electrical connections. • Usable as a tractor unit via removable/sliding Jost fifth wheel (JOST JSK SL), superstructure removable. • Removable flatbed body as high-profile welded steel construction (approx. 4,250 mm x 2,480 mm, A-dimension open). • Flatbed equipment: Container locks, Multisafe/Multifix stanchion pockets and retractable lashing eyes (2,500 daN / 6,500 daN). • Removable aluminium drop sides and rear underrun protection (extendable) incl. additional/front support. Further information on request.

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK Lrjdpfsgrkigox Ah Sou (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub Lrjdpfxjy U Auto Ah Sju • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, Year of construction: 2026, pressing force: 120 t, DURENDUS 120 T Workshop Press – Single-Column Press – 1,250 mm clear width, 400 mm stroke The machine shown here has already been built and delivered to a customer. We can supply you with this machine from our stock or manufacture it new – and we will gladly consider individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the specific application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly to the project. Tabletop with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral displacement of the press ram (900 mm) Bending tool Torsion-proof cylinder with manual stroke adjustment V-profile straightening bolster in combination with a tabletop LED lighting Foot switch Cooling ===== Technical data + information: ==== General information Type: Workshop press Press force: 120 t (optionally adjustable) Total weight: approx. 1,300 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,550 mm ==== Working area Clear width: 1,250 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 200 mm Piston rod: Ø 125 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.7 mm/s Return speed: 12.6 mm/s ==== Hydraulics & Drive Pump output: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 4.5 kW ==== Equipment Height-adjustable crossbeams with bolt locking Chain mechanism for table adjustment Pressure gauge for pressure indication Lrsdpfx Ahjy Hqwgj Sju Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, extracting, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength is special machine construction and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 10/2026, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,355 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,726 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Hill start assist * Exhaust system, EU6e (EC) * Preparation for trailer hitch * Towing eye at the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots and reading light * Sun visors, foldable and swiveling sideways * Exterior mirrors, electrically adjustable, heated and foldable Lodpjzc Dhcofx Ah Soru * Left exterior mirror, convex, with LED turn signal and wide-angle view * Right exterior mirror, convex, with LED turn signal and wide-angle view * All-wheel drive 4x4 * Emergency brake assist (Front Assist) * Battery 520 A (92 Ah) * Rubber floor in the cab * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Operating voltage 12 V * Stone chip protection (without CO2 optimization) * H2 - Normal roof * Differential lock on the rear axle (manually switchable, mechanical) * Immobilizer, electronic * Parking assistance system (PDC) front and rear * Entry handles on the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with automatic driving lights and coming/leaving home function * Electrical connection block and KFG (vehicle-specific wiring harness) * Premium interior noise damping measures * With UNECE CS&SU (Cyber Security and Software Updates) * 4-cylinder diesel engine 2.0L, assembly 03N.G * Automatic Distance Control (ACC) * 8-speed automatic transmission 4x4 * Glove compartment with lockable lid, illuminated * Entry handle on the partition in the cargo area * Automatic climate control "Climatronic" in the cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Anti-glare interior mirror * Traffic sign recognition * Rear view camera system with dynamic guidelines * High beam assistant "Light Assist" * Leather multi-function steering wheel, heated, with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Country cluster "WLTP EU approval" * Digital instrument cluster * Driver alertness and fatigue detection with driver monitoring camera * MAN SmartLink * 130 kW (LD) * Fog lights incl. cornering lights * MAN Connect services incl. emergency call service * 12 V socket, cupholder * Tire pressure monitoring system * L3 - Standard * Three-point automatic seat belts with height adjustment * Rear wing doors with 270-degree opening angle * Heat-insulating glazing * 12 V socket in the cab (in the instrument panel) * Suspension seat "ergoActive" left * Suspension seat "ergoActive" right * Seat belt warning, front * Seat covers in "Toronto Grid" fabric * Seat heating for driver and front passenger, separately adjustable * Side marker lights * 2 remote control keys * Approval as 3.5t * Start-stop system with brake energy recovery * Lane change assist (Side Assist) * Side wind assist * Headlight cleaning system, washer fluid level indicator, heated windshield washer nozzles * Windshield wiper interval control with light and rain sensor * Special purpose vehicle (LNFZ) design with up to 3 seats * Keyless Go * Sliding door, right * Turning warning on both sides and drive-off warning * Turn assist braking function * Emergency assist incl. travel assist and lane assist * Preparation for alcohol interlock * Speed limiter with predictive control * Multi-function front camera * Partition * Step illumination * Digital radio reception (DAB+) * Front axle, reinforced * Comfort telephony with LTE and wireless charging

Condition: new, Year of construction: 2026, pressing force: 80 t, DURENDUS 80 T Workshop Press – Single-Column Press – 900 mm clear width, 400 mm stroke The machine shown here has already been built and delivered to a customer. We can deliver this machine from stock or manufacture it new – and we will gladly take individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the respective application. The basic machine represents a functional standard design – in practice, it is usually expanded with additional equipment and configured according to the project requirements. Tabletop with X-shaped T-slot 600 × 900 × 30 mm Pressure setting Lateral displacement of the press ram (600 mm) Bending tool Torque-resistant cylinder with manual stroke adjustment V-profile straightening block in combination with tabletop LED lighting Foot switch Cooling ===== Technical data + information: ==== General information Type: Workshop press Press force: 80 t (optionally adjustable) Total weight: approx. 800 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working area Clear width: 900 mm Open depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbar usable width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 180 mm Piston rod: Ø 100 mm Height adjustment: via chain mechanism Lredpfoy Hqlqjx Ah Ssu ==== Speeds No-load speed: 7.5 mm/s Return speed: 10.9 mm/s ==== Hydraulics & Drive Pump output: 11.5 l/min Motor power: 3 kW Hydraulic tank: 24 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 3.5 kW ==== Equipment Height-adjustable crossbars with pin locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, unpressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on them. Our great strength lies in special machine construction and press automation. We distribute tailor-made hydraulic presses at surprisingly affordable prices. Leading European manufacturers’ components are mainly used for the hydraulics of the presses.

Condition: used, mileage: 788,500 km, power: 335 kW (455.47 HP), first registration: 01/2018, gearing type: automatic, emission class: euro6, Equipment: air conditioning, -Peterbilt 579 -First registered: January 9th, 2018 -Paccar engine -455 HP -Euro 6 -10-speed Eaton Fuller automatic transmission -Mileage approx. 788,500 kilometers -Disc brakes -Rear axle, air-suspended -Adjustable fifth wheel -Axle lock -Aluminum rims -Aluminum tanks -Full fairing -Adaptive cruise control with brake assist -2x sleeping berths -2x seats, air-suspended -Refrigerator -Cruise control -Air conditioning -Adjustable multifunction steering wheel -On-board computer -Digital tachograph -Radio -Brake system converted to EC standard -24 volt light & ABS system for trailer operation -German registration The vehicle has just arrived and is currently being converted. But it can be viewed at any time. Price: 87,800.00 ¤ net You can find more pictures on our homepage: Lrodjp Nny Uspfx Ah Ssu Subject to errors and prior sale Certified according to ISO 9001: 2015 Every imported truck is converted in our workshop according to the EC guidelines, e.g. the braking system. We also refine the vehicles according to customer requirements. Examples: Individually manufactured stainless steel parts, interior fittings, paneling (leather, fabric), etc. PTO and ADR approvals are also possible in-house. If your dream vehicle is not included, contact us. We will then import your dream truck (all manufacturers, used or new). The prices include: Shipping, customs clearance, conversion according to EC guidelines, German TÜV approval, AUv

Condition: used, mileage: 44,142 km, power: 150 kW (203.94 HP), first registration: 07/2022, fuel type: diesel, overall weight: 3,200 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 4,904 mm, total width: 1,904 mm, total height: 1,970 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Errors and prior sale excepted! Internal number: 1005. X017544 ----EQUIPMENT * Double cab with 3 seats in the 2nd row * 19-inch alloy wheels * Fixed tow bar with trailer stability control * Battery/generator capacities: standard battery and higher-capacity generator * Gross vehicle weight: Permissible gross weight 3.2 t – Permissible total weight 3,200 kg – Suspension and dampers for vehicles with 3.2 t permissible total weight – Center wheel arch cover – Reinforced on-board tools and jack for vehicles with 3.2 t permissible gross weight * Glove compartment with lighting * Rear wing doors without windows – Rear wing doors without window cutouts – Rear wing door lock with internal release function – Without rear window – Without interior safety mirror * Rear wing door lock with internal release function * Partition walls: high partition without window, plus 8 tie-down eyes for cargo securing – High partition – No child safety lock in passenger compartment – Reinforced tie-down eyes for cargo securing (ISO 27956) * Seat configuration – 3. seat adjustments: Height adjustment for left single seat in driver’s cab * Air conditioning in driver’s cab, electronically controlled * Seat configuration – 3. seat adjustments: Height adjustment for left and right single seat in driver’s cab * Seat configuration – 3. seat adjustments: Height adjustment for right single seat in driver’s cab * Seat configuration – 4. lumbar supports: Manually adjustable lumbar support for left driver’s cab seat * Seat configuration – 4. lumbar supports: Manually adjustable lumbar support, left and right, for single seats * Lighting and visibility – Automatically dimming interior safety mirror – Daytime running lights with automatic headlight control, "Leaving home" function and manual "Coming home" function – Windscreen wiper interval control with rain sensor for front wipers * Differential lock – Mechanical rear axle differential lock * Steering wheel: 3-spoke multifunction leather steering wheel * Multifunction display: Digital cockpit and fatigue detection * Radio navigation system “Discover Media” including “Streaming & Internet” – Voice control – 2 USB interfaces (Type C) in dashboard – Radio navigation system “Discover Media” with 20.3 cm (8 inches) touchscreen, incl. streaming and internet – Navigation functionality/preparation – 4 speakers: 2 tweeters, 2 woofers – Wired & wireless App-Connect * Fog lights incl. cornering lights * Note: Without child safety lock in passenger compartment * ParkPilot front and rear * ParkPilot rear * Tire pressure monitoring indicator * Driver assistance systems: Rear view camera “Rear View” (static guidelines) * Reinforced tie-down eyes for cargo securing (ISO 27956) * Auxiliary heaters: Water auxiliary heater with programmable parking heater function * Auxiliary heaters: Water auxiliary heater with programmable parking heater function with remote control Lrsdpfoz E Adqjx Ah Sju * 2 broadband loudspeakers * Airbag for driver and passenger * Permanent all-wheel drive 4MOTION * Exterior mirrors electrically adjustable and heated * Exterior mirrors, left and right convex * Hill start assist * Third brake light * Green tinted windows * Rev counter * Three-point automatic safety belts * ESP Electronic Stability Program * Chassis: 17" chassis and brake system * Electric windows (2) * Fresh air system with multi-stage fan * Transmission: 7-speed DSG automatic