Used Haeusler Vrm 3000X25Mm for sale (39)

Condition: good (used), functionality: fully functional, Manufacturer: MK Messtechnik: EMC Test-and Measuring Systems Examples of use: Transmission of engine or radio noises during immunity tests (vehicle tests). + Monitoring displays + Monitoring audio signals The AV system (Analog optical transmission line for audio and video signals) consists of: - AV-Rmr² multi-channel receiver (for 8 channels, incl. power supply) - User manual Hedpfowpgkzox Apyenn - 8-channel charger (1 channel defective) - AV-µC camera - 6x Battery-Pack BP-84 - 3x AV-Cr camera system - 3x PT-02 pan/tilt head - AV-C video camera - AV-T transmitter - 2x dAV-Cr-SD - Display ED-35 - Various cables, unclear if all are complete

Condition: excellent (used), For painting-finishing line (Ultra - Violet rays system) Max working width mm 1300 Total machine lenght: mm 2900 (ca.) Workpieces thickness (working height): mm 0 - 80 (ca.) Adjustable feeding speed: m/min 0 - 40 (ca.) PLC control panel (Touch Screen) Built-in electric and command panel Hodpfjgz Svnsx Apyonn Total installed power KW 36.9 Equipped with: No. 2 U.V. lamps Motorized feeding system by metal rods runned with two side-chains In-feed suction system (to take in the air) Out-feed suction system (to take away the solvent fumes)

Condition: excellent (used), For painting-finishing line (Ultra - Violet rays system) Max working width mm 1300 Total machine lenght: mm 4000 (ca.) Workpieces thickness (working height): mm 0 - 80 (ca.) Adjustable feeding speed: m/min 0 - 40 (ca.) PLC control panel (Touch Screen) Hnjdpfjgz Svgsx Apysn Built-in electric and command panel Total installed power KW 54.9 Equipped with: No. 3 U.V. lamps Motorized feeding system by metal rods runned with two side-chains In-feed suction system (to take in the air) Out-feed suction system (to take away the solvent fumes)

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 12/09742, working width: 3,000 mm, bale length: 3,050 mm, roller (bottom) diameter: 400 mm, roller (top) diameter: 405 mm, sheet thickness (max.): 30 mm, TECHNICAL DETAILS Sheet width: 3,000 mm Upper roll working length: 3,050 mm Lower roll working length: 3,050 mm Side rolls working length: 3,100 mm Upper roll diameter: 405 mm Lower roll diameter: 400 mm Side rolls diameter: 320 mm Plate thickness for bending: max. 30.8 mm Plate pre-bending: max. 20 mm Distance between upper and lower roll: 70 mm MACHINE DETAILS Total power requirement: 45 kW Hsdow Eh Hvjpfx Apyjnn Electrical connection: 220/380 V Roll drives: 2 units FURTHER DETAILS Tilting of upper roll from operator panel Opening of swing bearing from operator panel Overload protection for conical bending device

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece Hsdoip Uzpopfx Apyenn →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340ec347

Condition: excellent (used), Year of construction: 2011, I sell the 4-lamp UV-drying tunnel Cefla UV-R M4/3500 Year 2011 Working width 1400mm. Hnedpfxet S Ehze Apyjn Total length 3,70m Total power 71,55 kW Very good condition, available immediately.

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm Hjdpeylyh Defx Apyenn - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: refurbished (used), Tube Straightener VRM60/75, made by KIESERLING Tube diameter : 8 – 60 or 14 - 75 mm Tube length : Depending on accessories (loading table, channels). Minimum 0.5m The ratio diameter/thickness depends on the yield. Strength Example: - 300 N/mm2 = Max. 6.5mm - 400 N/mm2 = Max. 5.7mm - 500 N/mm2 = Max. 5.1mm - 600 N/mm2 = Max. 4.7mm *The first 4 photos are examples of revamping of similar machines that we can offer in case of interest. The following are pictures of the machine in its current state. Tube diameter: 8 – 60 or 14 - 75 mm Hnjdpfx Apsvtpghoyen Tube length: Depending on accessories (loading table, channels). Minimum 0.5m

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Hnodpfx Apsw Uc T Ieyjn Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture 2012 Vertical stroke via linear axis Schneider Electric PAS43SBG1800 Travel distance 1800 mm Travel distance per revolution 20 mm Maximum speed 1 m/s Drive element Ball screw drive Guide type Recirculating ball bearing guide size 20 Payload 60 kg Maximum speed ball screw 3000 rpm Motor type Schneider Electric BMH1002T07F2A Rated voltage 240 Vrms Rated power 1.912 kW Rated speed 3500 rpm Current consumption max. 29.4 A Horizontal travel 670 mm via Festo pneumatic cylinder Hjdpfxsgf Ix As Apyenn Gripper opening 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper opens pneumatically - Unit is mounted on welded square tube frame Total weight approx. 380 kg Overall dimensions W x H x D 1280 x 2950 x 1150 mm Very good condition Almost identical linear unit under stock number 59702

Year of construction: 2015, operating hours: 8,100 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Engine 670 kW Tier 3 2x Winches 300 kN Counter weight 32,5 to Additional informations: -Additional reversing camera, winch monitoring -Hammerhead - Liebherr Hydraulic Oil Plus (Longlife & Bio) -LiDAT plus incl. Teleservice - Central lubrication system slewing ring - Electric refueling pump -Air conditioner - Auxiliary heating - Orthopedic driver's seat - Gripper calming winch 3to - preparation until bulkhead plate - Main winch constant pull one winch - Wind synchronization Hnodeh Ty Ayepfx Apyen - Litronic SWG control - Auxiliary hydraulics for diaphragm wall grab Leffer - Rope winch - VRM ready - Crawler carrier hydraulic quick couplers

Condition: ready for operation (used), Specifications: Output speed: 10 to 600 r/min Torque output, maximum: 180 oz-in. (13 kg-cm) Speed regulation: Line: ±0.25% f.s. Load: ±0.25% f.s. Drift: ±0.25% f.s. Display: four-digit, seven-segment LED Input: Supply voltage limits: 90 to 130 Vrms 50/60Hz Current, maximum: 2.3A Temperature, operating: 0° to 40°C (32° to 104°F) Temperature, storage: –45° to 65°C (–49° to 149°F) Humidity (non-condensing): 10% to 90% Hsdpfxjxtbgvj Apysnn Altitude: less than 2000 m Weight: 15 lb. (6.8 kg) Dimensions (W x H x L): 7 x 7 x 11.5 in. (178 x 178 x 292 mm) Comes with a Cole Parmer Masterflex Easy-Load II L/S Head Pump 77201-60. Pump specification: Material: Rotor/stainless steel (SUS303), Case/PPS (Polyphenylene sulfide) Specifications: Pump series: L/S Number of channels: 1 Max flow rate: 2900 mL/min Min flow rate: 0.034 mL/min Max flow rate per channel: 2900 mL/min Min flow rate per channel: 0.034 mL/min Volume per revolution with L/S 13 tubing: 0.06 mL Volume per revolution with L/S 14 tubing: 0.21 mL Volume per revolution with L/S 16 tubing: 0.8 mL Volume per revolution with L/S 25 tubing: 1.7 mL Volume per revolution with L/S 17 tubing: 2.8 mL Volume per revolution with L/S 18 tubing: 3.8 mL Compatible tube No.: L/S13, 14, 16, 25, 17, 18 Good working condition. Please check out our other listings as well.

Year of construction: 2026, condition: new, functionality: fully functional, A cement clinker grinding mill is a specialized equipment used to grind the hard nodular clinker into fine powder, which is cement. Most cement is currently ground in ball mills and also vertical roller mills, which are more effective than ball mills. Here are key features and information about cement clinker grinding mills: 1. Raw Materials: - The main raw material for making cement is clinker, which is produced by sintering limestone and clay. Other materials such as gypsum, fly ash, or slag may also be added during the grinding process to achieve specific properties. 2. Grinding Process: - The clinker and other additives are finely ground in the grinding mill to produce cement. The grinding process is a crucial step in cement production and contributes significantly to the final quality of the product. 3. Types of Mills: - Ball Mills: Traditional ball mills are commonly used for grinding clinker. They operate by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. - Vertical Roller Mills (VRM): VRM technology has become increasingly popular for clinker grinding. These mills use a rotating table with rollers to crush and grind the clinker, providing energy efficiency and a smaller footprint compared to ball mills. 4. Gypsum Addition: - Gypsum is often added during the grinding process to control the setting time of the cement. It prevents flash setting of the clinker and facilitates the formation of a workable and pumpable cement paste. 5. Quality Control: - Quality control measures, such as monitoring the fineness of the cement, chemical composition, and other properties, are implemented during the grinding process to ensure the final product meets the required specifications and standards. 6. Clinker Cooling: - Before grinding, the clinker is produced by heating the raw materials in a kiln. The clinker is then cooled before entering the grinding mill to prevent excessive heat build-up during grinding. Hnsdpfx Ajq Nfbhepyon 7. Dust Collection and Environmental Considerations: - Dust collectors and air pollution control systems are often employed to capture and control the dust generated during the grinding process, addressing environmental and safety concerns. 8. Packaging and Storage: - After grinding, the cement is typically stored in silos before being packaged in bags or dispatched in bulk for distribution to construction sites or for sale in the market. Cement clinker grinding mills play a crucial role in the cement production process, and advancements in technology continue to improve the efficiency and environmental sustainability of the grinding process. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, functionality: fully functional, Year of construction: 2026, Microsilica, also known as silica fume or condensed silica fume, is a byproduct of producing silicon metal or ferrosilicon alloys. Microsilica powder grinding mills are used to process microsilica powder for various applications, including the production of high-performance concrete, refractory materials, and other specialty products. Grinding mills play a crucial role in reducing microsilica particles to the desired fineness. Here are some key aspects related to microsilica powder grinding mills: 1. Mill Types: - Ball Mill: A traditional ball mill is commonly used for grinding microsilica. It relies on the impact and attrition forces to reduce particle size. It is effective for both wet and dry grinding. - Vertical Roller Mill (VRM): VRM technology is known for its energy efficiency and the ability to grind materials into a narrow particle size distribution. It is suitable for grinding microsilica. 2. Grinding Process: - The grinding process involves feeding microsilica particles into the grinding mill. The grinding media (balls or rollers) inside the mill crush and grind the microsilica particles into a fine powder. 3. Particle Size Distribution: - Controlling the particle size distribution is crucial for achieving the desired properties in the final product. The grinding mill should be equipped with mechanisms to control and monitor particle size distribution. Hedpfx Aoq Nxp Sspyenn 4. Mill Design and Components: - The design of the grinding mill, including the type of grinding media, liners, and the grinding chamber, influences the efficiency and performance of the milling process for microsilica. 5. Air Classification (Optional): - In some cases, air classification systems are integrated into the grinding process to separate fine particles from coarser ones, ensuring a more uniform product. 6. Control Systems: - Advanced grinding mills often come with automated control systems to regulate various parameters such as feed rate, mill speed, and product fineness. 7. Material Handling: - Efficient material handling systems are essential to transport microsilica to and from the grinding mill. This may involve pneumatic or mechanical conveying systems. 8. Cooling Systems: - Grinding processes generate heat, and efficient cooling systems are often integrated to maintain the temperature within a controlled range. 9. Dust Collection: - Microsilica powder grinding can produce airborne dust. Dust collection systems are necessary to maintain a clean and safe working environment. 10. Quality Assurance: - Grinding mills for microsilica should be equipped with quality assurance features, such as in-line particle size analysis, to ensure consistency in the final product. When selecting a microsilica powder grinding mill, factors such as production capacity, energy efficiency, and the required particle size distribution should be considered. Additionally, mills should be chosen based on the specific characteristics of the microsilica being processed and the intended application of the final product.