Used Heating Press Double Column Press 120 T for sale (88,708)

Condition: ready for operation (used), Two mechanical large-format double-column eccentric punching presses Rhodes (UK) are available. Press force: 350t, table dimensions X/Y: 1750mm/920mm, ram dimensions X/Y: 1550mm/615mm, ram stroke: 101mm, ram adjustment: 100mm, stroke rate: 50 strokes/min, max. installation height: 483mm, side opening X/Y: 630mm/380mm, table height: 933mm, weight: approx. 43000kg. Documentation available. On-site inspection is possible. Fgjdpfxeyfv I To Al Soh

Condition: used, Eccentric stamping press HAULICK + ROOS, Type RVD 125 Double-column eccentric press Machine No. 212560, Year of manufacture 1981 Pressing force 125 tons Table size 880 x 800 mm Table opening 470 x 140 mm Column distance 900 mm Column distance, side 415 mm Ram stroke 45 mm Ram adjustment range 0-80 mm Installed height as shown in the picture 340 mm Stroke rate 50 to 300 strokes/min Motor power, main drive 22 kW Power connection 380 volts, 50 Hz - Double connecting rod drive with 4-bearing eccentric shaft for off-center ram pressure load - Adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of manufacture 2003 - Adjacent control panel for the roller feed - Strip feed direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press approx. 11 tons Fgsdpfx Alehlnzks Sjh

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Fgsdpfjuqdi Usx Al Seh Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Complete line as shown on photos. Fgjdpez D Tdfefx Al Ssh Excellent condition. Force 200 t Table 1800 x 1000 mm Number of cycles per 1 min Machine dimensions 2700 x 2000 x 4400 mm Machine weight 28000 kg

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec Fedpofxygpofx Al Sogh no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Condition: excellent (used), Year of construction: 1973, Description to follow! Fgjdpfx Ajz Ebqvjl Ssh

Condition: excellent (used), Year of construction: 2008, Haulick + Roos Year of manufacture: 2008 Pressing force: 2,500 kN Stroke rate: 180 strokes/min Stroke adjustment: 20-160 mm Ram adjustment: 150 mm Fjdpfez Ei Ehsx Al Ssgh Table surface: 1,950 x 1,000 mm Installation height: 450 mm Includes Fecker strip feeding system.

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Fgjdpjlc N Rysfx Al Soh

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Fodpfxjfxyh Rj Al Sjgh Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: good (used), functionality: fully functional, BDC 100T Hydraulic Moulding Press | Heated Platen Compression Press BDC 100T hydraulic moulding press for sale with heated platens. Approx. 100 tonne compression press for rubber, plastics, composites and laminating applications. Manufacturer: BDC Machine Type: 100T Moulding Press with Heated Platens Condition: Decommissioned. Good Fgjdpfxozi Hchs Al Soh 100 Tonne Heated Platen Compression / Moulding Press This BDC 100T Hydraulic Moulding Press is a heavy-duty industrial press designed for heated platen moulding, compression moulding, forming, bonding and laminating applications. This machine is suitable for use in rubber moulding, plastics processing, composites, bonding, pressing, laminating and heated forming operations, making it a versatile addition to manufacturing, production and specialist fabrication workshops. Key Features 100 tonne hydraulic press capacity Heated upper and lower platens Heavy-duty industrial construction Suitable for compression moulding and heated platen pressing Ideal for rubber, plastics, composites and laminated materials Hydraulic pressing action for controlled force application Well-suited to production, R&D and workshop environments Machine Description The BDC 100T Hydraulic Moulding Press is designed for applications requiring high pressure and controlled heat. The heated platens allow materials to be formed, cured, bonded or compressed under consistent pressure, making the machine suitable for a wide range of industrial moulding and manufacturing processes. Hydraulic moulding presses of this type are commonly used for rubber moulding, plastic compression moulding, composite forming, gasket production, bonded components, laminating, hot pressing and specialist materials processing. Approximate Technical Specification General Manufacturer: BDC Machine Type: Hydraulic moulding / compression press Press Capacity: 100 tonnes Press Action: Hydraulic Construction: Heavy-duty industrial press frame Rams: 1 Guides: 4 Platen Type: Heated platens Platen Arrangement: Upper and lower heated work platens Working Applications Compression moulding Rubber moulding Plastic moulding Composite pressing Laminating Hot pressing Bonding applications Heated platen forming Production and workshop moulding work Heated Platen System Heating: Heated platen system Platen Size: 510 x 510mm Temperature Control: Fitted with platen temperature control Platen Use: Suitable for controlled heat and pressure applications Press System Power: Hydraulic press system Force: Approx. 100 tonnes Operation: Hydraulic pressing cycle Pump Size: 2.2kW Ram Diameter: 190mm Distance Between Guides: 540mm (Width) Max Daylight: 250mm Typical Configuration: Heavy-duty hydraulic moulding press with heated work platens Summary The BDC 100T Hydraulic Moulding Press is a 100 tonne heated platen compression press used for rubber moulding, plastic compression moulding, composite pressing, laminating, bonding and hot press applications. It features hydraulic pressing action and heated platens, making it suitable for industrial manufacturing, workshop production and specialist materials processing. Important Notice Note: Specifications and information provided in this listing are supplied in good faith; however, their accuracy cannot be guaranteed. Specifications are approximate.

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Fedpfxezvfp Ho Al Segh Motor power: 3 kW

Condition: used, Year of construction: 2008, Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN Fsdpfx Aeznn Upsl Segh max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Fjdpfxslc N R De Al Ssgh

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 Fsdpfsdzqptox Al Sogh - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Fgedpfx Ajykbcmel Seh Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Fodpfsguvtlsx Al Sjgh Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: excellent (used), Year of construction: 2001, HELMERDING Press KDH 400/2600/2 Pressing force 4,000 kN Stroke rate 15-60 strokes/min Stroke adjustment 80-250 mm Slide adjustment 175 mm Fsdsz Ek Anepfx Al Sjgh Installation height 550-800 mm Table area 2,500x1,600 mm Slide area 2,500x1,400 mm Pass-through hole in the press table 1,300x800 mm Weight 106,000 kg Lorenz Strip Line EWH 600/150 Strip width 80-600 mm Strip thickness 0.6-6.0 mm Max. coil weight 7,500 kg

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale Fgodpsdzp Tcefx Al Sjh - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: used, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1350 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2000 mm Fjdjz Hi Rgjpfx Al Ssgh Slide area: 3500 x 2000 mm Die cushion capacity in table: 150 ton Die cushion stroke: 200 mm Die cushion pad area: 2700 x 1500 mm Number of strokes: 7 - 21 s.p.m. Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Required power: kW Height over floor approx.: 8600 mm Weight of machine approx.: 250 ton Standard configuration LINK DRIVE

Condition: used, pressure 200 t throat - mm stroke 250 mm Table dimensions 2420 x 840 mm ram surface 1850 x 650 mm dayligth 500 mm ram adjustment 110 mm distance between columns 1900 mm table height 170 mm no. of strokes 25 - 45 Hub/min total power requirement 22 kW dimensions of the machine ca. 2550 x 2370 x 3820 mm weight 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display Fjdpfsgk Rfzox Al Sogh - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement.

Condition: good (used), Year of construction: 1994, Pressure: 315 t Stroke: 20-150 mm Adjustable ram stroke min./max.: 20 - 150 mm Table size: 1780 x 1250 mm Ram area: 1500 x 1000 mm Total power requirement: 75 kW Fedpez Iy Avjfx Al Segh Machine weight approx.: 46 t Additional information: - Installation height with max. stroke, adjustment at the bottom, installation at the top: 00 mm - Table opening: 1200 x 300 mm - Recess in the table: 1300 x 400 x 80 mm - Stroke rate continuously adjustable: 20-120 strokes/min.

Condition: used, Technical details: pressure: 80 t Fgodpfxju Nfnws Al Ssh dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *

Condition: new, Year of construction: 2025, pressure 1000 t Fedpfeym D E Ajx Al Ssgh distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: excellent (used), Year of construction: 2001, Manufacturer: ROVETTA Model: S4-800 Year: 2001 Condition: Used Stock number: 0392 Builder: Rovetta Slide force: 800 tons Number of driving points: 4 Slide stroke: 700 mm Slide adjustment: 350 mm Strokes per minute: 10-24 Die height (low stroke, high slide adjustment): 1,100 mm Usable distance between front posts: 4,200 mm Bolster table size: 4,000 x 2,000 mm Slide dimensions: 4,000 x 2,000 mm Movable table height: 600 mm Side window size: 3,400 x 1,900 mm Number of cushions: 1 Blankholder cushion - total force: 150 tons Lower blankholder cushion stroke: 250 mm Lower blankholder working area: 1,500 x 1,000 mm. Fodpfxsyq Tdpj Al Sjgh

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH Fodpjfxyirofx Al Sjgh dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec