Used Heraeus Muffle Furnace for sale (804)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Hedoyniz Eopfx Aazju Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Year of construction: 2010, condition: excellent (used), Here, we offer a Heraeus Vötsch temperature testing chamber. Vötsch temperature testing chamber, test cabinet VLM 3068/S, air-cooled (top-loading test chambers for construction materials) Control panel The control panel is mounted on a console on the temperature testing chamber. All control and operating commands can be initiated by simply touching the function symbols. The operating manual for the control panel is included. Main switch The main switch is located at the front of the temperature testing chamber. Air handling unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air guide plates on the long sides. Feedthroughs The temperature testing chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front: 2 x 82 mm diameter, at the rear: 1 x 85 mm diameter Internal dimensions: width 2000 mm, depth 570 mm, height 600 mm Hjdpfx Aszgbmioazeu External dimensions: width 3000 mm, depth 870 mm, height 1060 mm Technical data: Data for mechanical load: max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW, rated current 9 A Fuse on customer side: 16A, slow-blow Temperature testing chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement: sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, This listing is for a Sorvall Heraeus 75002000 Centrifuge Rotor with Buckets. The unit is in full working condition and is ready for immediate release. Supplied with x4- 75002002 Round Buckets Enhance your laboratory's centrifugation capabilities with the Sorvall Heraeus 75002000 rotor, crafted for efficient performance in various applications. Key Features: Manufacturer: Sorvall Heraeus, known for reliability in laboratory centrifugation. Part Number: 75002000, ensuring you have the correct rotor for your specific needs. Maximum Speed: Capable of reaching up to 4,700 RPM, providing effective and rapid sample separation. Rotor Type: Swing Bucket Rotor design allows for smooth operation and optimal pelleting of samples as buckets swing out during centrifugation. Capacity: Accommodates 4 x 400 mL sample tubes, making it suitable for moderate volume applications. Maximum Load: Designed to support a max load of 540 g, ensuring stability even with heavier samples. Maximum RCF: Achieves a maximum relative centrifugal force (RCF) of 4618 x g, which is effective for a wide range of laboratory separation tasks. Hodpfsxxy Ucex Aazju Compatible Centrifuges: Sorvall Legend Mach 1.6 Heraeus Multifuge 1S

Condition: used, El. heated chamber oven, make Heraeus Type: PL 320 Temperature: max. 650°C Hodpfxjxlq Tpj Aazju Clear dimensions (W x D x H): approx. 280 x 440 x 200 mm

Year of construction: 2006, condition: used, functionality: fully functional, Multi-purpose chamber furnace line consisting of the following components: • Aichelin chamber tempering and stress-relief furnaces VKHLE 4/2-70/85/130 (2 units) • Aichelin chamber preheating furnace VKHLG 4/2-70/85/130 (1 unit) • Aichelin single-chamber continuous furnace DGKS 4/2-70/85/130 (3 units) • Aichelin chamber washing machine EKFG 4/2-70/85/130 (1 unit) • Aichelin loading/unloading trolleys (2 units) • Aichelin table loader storage station (1 unit) • Aichelin transfer table storage station (1 unit) • Aichelin cooling unit storage station (2 units) • Storage stations (30 units) • Charging racks • Spare parts for the line Hedpsxwn R Nefx Aazou Useful load: Grate length: 1300 mm Grate width: 700 mm Loading height above grate: 800 mm Max. batch weight: gross max. 1000 kg/grate Aichelin chamber tempering and stress-relief furnace VKHLE 4/2-70/85/130: External dimensions: Width: approx. 1820 mm Height: approx. 4050 mm Length (incl. control cabinet): approx. 3300 mm Working height above floor: 1600 mm General data: Maximum temperature: 350°C Operating temperature: 150-200°C Number of temperature control zones: 1 Chamber preheating furnace VKHLG 4/2-70/85/130: External dimensions: Width (incl. control cabinet): 3035 mm Height (overall): 4450 mm Length (overall): 3450 mm Loading height above floor: 1600 mm General data: Maximum temperature: 600°C Operating temperature: 400-500°C Number of temperature control zones: 1 Single-chamber continuous furnace DGKS 4/2-70/85/130: External dimensions: Width (incl. control cabinet): approx. 3400 mm Height (incl. maintenance platform): approx. 5300 mm Length (incl. exhaust hood): approx. 6850 mm Working height above floor: 1600 mm General data: Maximum temperature: 1050°C Operating temperature oven: 750-1000°C Temperature control range oil bath: 60-150°C Gross batch weight at 950°C (max.): 1000 kg Max. gross heating capacity from 25 to 850°C (max.): 800 kg/h Number of temperature control zones in oven and oil bath: 1 + 1 Oil bath volume: approx. 6.5 m³ Cooling capacity oil bath (at 90°C bath temperature): 80 kW Chamber washing machine: External dimensions: Width: 2900 mm Height (above hall level): 4000 mm Length: 3150 mm Loading height: 1600 mm General data: Washing fluid temperature: 50-80°C Spray fluid temperature: 50-80°C Bath volume, washing fluid: 4550 l Bath volume, spray fluid: 4700 l Gross weight incl. batch and washing fluid: 125 kN Loading table: Width: approx. 2200 mm Length: approx. 3200 mm Loading height: 1600 mm Weight (incl. batch): approx. 29 kN Batch cooling stations: Length: approx. 2100 mm Width: approx. 800 mm Height: approx. 4350 mm Loading height: 1600 mm Weight (incl. batch): approx. 20 kN Preparation table fixed: Length: approx. 2100 mm Width: approx. 800 mm Loading height: 1600 mm Weight (incl. batch): approx. 25 kN Preparation table, hydraulically height-adjustable: Length: approx. 2100 mm Width: approx. 800 mm Lift: 1000 mm Loading height: 1600 mm Lifting capacity: 2.0 T Weight (incl. batch): 25 kN The sale covers the entire multi-purpose chamber furnace line. Individual furnaces, systems, or components cannot be purchased separately. The complete chamber furnace line must be dismantled, loaded, and transported by the buyer at their own expense. Inspection appointments can be arranged on request.

Condition: excellent (used), Vötsch VTS 7027-10 Temperature Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VTS 7027-10 Machine Type: Temperature Testing Chamber / Climatic Testing Chamber Test Chamber Volume: approx. 270 liters For sale is a used Vötsch VTS 7027-10 temperature testing chamber with programmable touch panel control. The system is suitable for professional temperature testing, environmental simulation, material testing, electronics and component testing, quality assurance, as well as development, aging, and stress tests. Technical Data: Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 10 K/min Temperature Change Rate (Cooling): approx. 14.5 K/min Temperature Deviation (Time): ±0.3 to ±0.8 K Temperature Deviation (Spatial): ±0.5 to ±2 K Test Chamber Volume: approx. 270 liters Refrigerant: R404A / R23 Refrigerant Quantity: 8 kg / 2.1 kg Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 14 kW Rated Current: 26 A Cooling: Water-cooled design Cooling water supply and return lines available Dimensions: Internal Dimensions (W × D × H): approx. 580 × 620 × 750 mm External Dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Equipment: Programmable touch panel control S!MCON/32-NET control, monitoring, and regulation system Interior made of stainless steel Large viewing window Test chamber lighting Side openings for test specimens Stainless steel shelves Adjustable temperature limiter Software temperature limiter RS232 interface Water-cooled refrigeration unit Hjdsz A A Ecjpfx Aazou Transportation Data: Dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Weight according to model documentation, without options: approx. 835 kg Transportation by forklift or similar lifting vehicle Condition: Used Optical condition according to the images. Scope of Supply: Vötsch VTS 7027-10 temperature testing chamber Touch panel control Stainless steel inserts as shown in the images Accessories as shown in the images Availability: upon agreement. Scope of supply as shown in the images. Subject to changes, errors and prior sale.

Condition: used, The Heraeus Sepatech 3743 centrifuge rotor is engineered for efficient and precise sample separation. Built for durability and balance at high speeds, it supports consistent laboratory workflows and is ideal for research, clinical, and industrial centrifugation applications Hodpfx Aoyx S T Hjazsu

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 618, functionality: fully functional, operating hours: 800 h, power: 80 kW (108.77 HP), input voltage: 400 V, input current: 250 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,200 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 4,900 mm, total width: 2,950 mm, total height: 2,900 mm, overall weight: 10,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, Condition: very good; the furnace has only been used for 100 batches. The delivery includes a loading electric cart and three charging baskets. Direct sale to end-users only. W-Technology s.r.o. Polní 8 79201 Bruntál Hedpfxozz A Rre Aazsu Czech Republic

Condition: ready for operation (used), Heraeus UT 6060 Heating Oven No. 415 Max. 300°C Dimensions: External: 750mm x 730mm x 580mm (L x W x H) Internal: 400mm x 350mm x 380mm (L x W x H) Further technical data can be found in the images. You are welcome to come and inspect the oven. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Hedpfx Aelt Ut Reazou Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: like new (used), Year of construction: 2008, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23477, workpiece weight (max.): 550 kg, total width: 1,300 mm, total length: 1,150 mm, total height: 2,800 mm, power: 12 kW (16.32 HP), input voltage: 400 V, usable tank capacity: 150 l, We offer this almost unused Rohde electric chamber furnace, model KEU 150 N SoB, manufactured in 2008. Manufacturer: Rohde Type: Electric chamber furnace KEU 150 N SoB Year of manufacture: 2008 Maximum temperature: 650 °C High-quality programmable control system Bentrop Thermocomputer TC 507 Neatly arranged control cabinet No visible signs of corrosion or thermal damage Industrial special version with extraction/air guidance Complete documentation If you have any questions or require further information, please feel free to send us a message or call us. Hjdpfoz Ehi Ejx Aazju

Condition: used, This listing is for Thermo Scientific Heraeus Pico 17 Microcentrifuge The unit is in full working condition and ready for immediate use The Thermo Scientific Heraeus Pico 17 is a compact ventilated benchtop microcentrifuge designed for routine laboratory micro-volume separation. It provides speeds up to 13,300 rpm and maximum RCF of 17,000 x g, with capacity for 24 x 1.5/2.0 mL tubes. Dimensions are approximately 225 x 243 x 352 mm and weight is approximately 10.5 kg. Rotor configuration may vary depending on the individual unit Hedpoy Iw Dpsfx Aazsu

Operating hours: 3,888 h, condition: good (used), Heraeus Xenotest 1200 CPS weathering tester Xenon device for testing the lightfastness and weather resistance of materials under simulated conditions Electrical connection Voltage: 400 V Nominal current: 50 A max. Connected load: 33 kVA max. Power consumption of xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors, 50 uF each Hedpfjxal Haox Aazju Operating hours: 3888 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Padelttherm HGU 9408/800 Hearth Furnace with Recirculating Air For sale is a professional Padelttherm heat treatment system / hearth furnace with recirculating air, type HGU 9408/800. The system was used for the heat treatment of aluminum housings and is designed as a gas-fired hearth furnace with air circulation. Two chain conveyors are also part of the documented overall system. Technical data: Manufacturer: Padelttherm GmbH Type: HGU 9408/800 Year of manufacture: 2019 Design: Hearth furnace with recirculating air / heat treatment system Material processed: Aluminum housings Temperature / Heating capacity - Max. permissible furnace chamber temperature: 800 °C - Operating temperature: 680 °C - Heating time from 20 °C to 680 °C: approx. 5–5.75 hours - Max. gross load weight: 4,900 kg - Heating medium: Liquefied petroleum gas (LPG) - Lower calorific value: 25.89 kWh/m³ - Gas inlet pressure / flow pressure: 100 mbar - Connected load: 523 kW - Natural gas flow rate: 20.2 m³/h - Combustion air: 560 m³/h at 80–100 mbar Burners / Recirculation - 4 burners, each 130 kW - 2 with pilot burners - Burner type: Cold air burner - Automatic ignition - Ionization flame monitoring - Individual burner control - 2 burners per recirculator - 2 hot gas recirculation fans Control technology - 2 control zones, front / rear - Electrical connection: 400 / 230 V, 50 Hz - Total electrical connected load: 21 kW - Hot gas recirculators: 2 × 4.0 kW - Combustion fan: 7.5 kW - Lift-up door drive: 1.5 kW - Hearth car drive: 1.5 kW - Controller: JUMO DiconTouch - Control behavior: PID - 10 programs - Display / Operation: DiconTouch - Temperature safety limiter: 2 × JUMO safetyM STB/STW - Thermocouples: NiCr-Ni Type K, Class 1 Usable space - Usable volume: 9.41 m³ - Usable width: 1,500 mm - Usable depth: 4,200 mm - Usable height: 1,300 mm - Internal dimensions: 1,600 × 4,300 × 1,400 mm Furnace dimensions - Width: 2,900 mm - Depth: 5,200 mm - Height: 3,330 mm - Weight: approx. 13,000 kg Overall dimensions of the system: - Width: 3,270 mm - Depth including track: 10,165 mm - Height including door portal: 4,355 mm Hearth car: - Width: 1,870 mm - Depth: 4,570 mm - Height: 780 mm Chain conveyor KF1400x120x80 - W × D × H: 1,785 × 14,680 × 1,850 mm - Weight: approx. 7,900 kg KF700x120x80 - W × D × H: 1,775 × 7,280 × 880 mm - Weight: approx. 1,650 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." Hjdpfoz Hvzrox Aazou More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, El. heated chamber oven, make Heraeus Hsdpfoxlr Nlex Aazou Type: T 340 Temperature: 250°C Clear dimensions (W x D x H): 300 x 280 x 270 mm

Condition: used, Technical details: temperature max.: 800-900 ° muffle size (length): 700 muffle size (width): 300 muffle size (depth): 300 mm total power requirement: 90 kW weight of the machine ca.: 0,13 t Hedow Rkuljpfx Aazeu Small chamber forging furnace. In 2017, the refractory bricks inside were renewed for €5,000. *

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 800 kg, We are offering this very well-maintained Balzer 800 aluminum melting furnace, manufactured in 2008. Manufacturer: Balzer Model: Balzer 800 Year of manufacture: 2008 Condition: very good Category ID: 235 Type ID: 1729 Machine type: Aluminum melting furnace Hjdpfx Aaez Dpy Nezou If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, EFCO Glass Tempering System 750 °C Thermal glass tempering system for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering system from the renowned British manufacturer EFCO Furnaces Ltd. Hjdpfoz Hm Ipex Aazsu The system is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System Components & Structure Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the enclosed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air (“quenched”) to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main control cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Manufacturer: EFCO Furnaces Ltd. Type: Glass Temperer (Glass Tempering System) Maximum temperature: 750 °C Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Connection voltage: 380 volts Number of phases: 3 phases Mains frequency: 50 Hz Reference number: 427206 Year of manufacture: 2001 Conformity marking: CE certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m Complete set of spare ceramic rollers: A full, unused/new set of high-quality transport rollers (Fused Silica Rollers) with a new value of over €10,000 for the oven area. Item location: 32278 Kirchlengern Dismantling until the end of October Dismantling & transport: Option 1: The dismantling, loading, and transport will be completely organized and carried out by the buyer (collection from the location). Option 2: Dismantling service by us: Alternatively, we offer to have our team professionally dismantle the complete system. Surcharge: €5,000 net "All from one source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2007, functionality: fully functional, operating hours: 800 h, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, temperature: 1,300 °C, inner dimension length: 450 mm, inner dimension width: 430 mm, inner dimension height: 600 mm, total length: 1,200 mm, total width: 800 mm, total height: 1,600 mm, overall weight: 330 kg, number of chambers: 1, control type: NC control, actuation type: manual, Used Nabertherm radiant furnace with C290 control system. Used in production for glass coating applications. Operating temperature was 350°C, maximum temperature is 1300°C. Age of the heating elements is approximately 5 years. Hjdpfx Asz E Nptsazou

Condition: used, Year of construction: 1996, machine/vehicle number: VKD5000G, power: 180 kW (244.73 HP), temperature: 1,120 °C, inner dimension length: 5,000 mm, inner dimension width: 550 mm, inner dimension height: 130 mm, number of chambers: 3, year of last overhaul: 2025, We offer a used WMU VKD5000G protective gas conveyor furnace (continuous belt furnace), year of manufacture 1996. The system is ideally suited for soldering and annealing stainless steel components. Technical data: Heated length: 5000 mm Number of heating zones: 3 Operating temperature: up to 1120 °C Usable width: 550 mm Usable height: 130 mm Heating power: 180 kW Hjdpfx Asy Nyqzjazeu Protective gas: Hydrogen / Nitrogen The furnace was relined in 2025 and is equipped with an almost as-new furnace muffle. If you have any questions or require further information, please do not hesitate to contact us by phone or email at any time.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty Hsdozbr U Uopfx Aazeu -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: good (used), Heraeus Vötsch HC 4055 Temperature Test Chamber Manufacturer: Heraeus Vötsch Type: HC 44055 Temperature Chamber Temperature Range: +180°C Rated Voltage: 380V, +-10%, 3/N, 50Hz Rated Current: 13.5 A Rated Power: 9 kW Housing Dimensions: W 1065 x D 1560 x H 1890 (mm) Observation Window: Width x Height 350 x 640 mm Test Chamber: (L x D x H) approx. 800 x 795 x 855 mm Test Chamber Volume: 550 l Cabinet is air-cooled Caution Cabinet can only be operated as an oven. Refrigeration circuit empty and shut down. Hodpfx Aouuilvjazju Air conditioning system shut down. Disconnected contactors: 03K2 Compressor 03K5 Condenser fan 15K6 Panel heater Solid state relay 21V4 Humidifier. Weight approx. 550 kg Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Heraeus Shock Test Chamber We offer a shock test chamber here. Temperature shock test cabinet, water-cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 11 K/min Cold chamber: The temperature control of the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber +50°C to +220°C Temperature range, cold chamber -80°C to +70°C Test chamber dimensions: width 470mm, depth 650mm, height 410mm External dimensions: width 930mm, depth 2115mm, height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For your security as a buyer, please note the following information: Hedszd R Azspfx Aazsu The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Type: HT 7012 S2 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace Hedpjzuabzofx Aazou If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: Heating jacket VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Hsdpozgbqzofx Aazou Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: Heating jacket VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Hedpfx Aezgbq Ioazeu Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.