Used Hitachi-Seiki Vs 50 for sale (34,301)

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 580 mm z-travel 580 mm control SEICOS 16M B-axis (table) 360 x 1° mm feed X/Y/Z/-axis 1 - 50.000 mm/min rapid traverse X/Y/Z 50,00 m/min turning speed range - stepless 35 - 12.000 Nm spindle drive 22,00 kW max. torque on the spindle 236 tool taper BT40 toolpiece magazine: chain magazine 61 Stück size of pallet 2x 400x400 mm Kdodpfow A Amfsx Ag Ijl max. workpiece diameter 630 mm workpiece height max. 680 mm workpiece weight max. 400 kg total power requirement 30,00 kW weight of the machine ca. 12,00 t dimensions of the machine ca. 4,00 x 3,50 x H3,00 m With SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster.

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, year of manufacture 1996. Model: SH-50 Serial number: 450 The machine is still under power and available at short notice. • P8 Power Supply worth €1,500 was newly replaced in August 2024 • The spindle was repaired in 2017 and, since then, has mostly been used in single-shift operation, as we primarily produce single parts and small batches. For this reason, the machine has spent most of its time being set up. • Machine: Milling machine Mori Seiki SH50 • Control: Fanuc MSX-516 Kdsdpjyt Nnpjfx Ag Iel • Year of manufacture: 1996 • Configuration: Horizontal milling machine with indexing table • Tool capacity: 60 (BT40) • Number of pallets: 2 (500mm x 500mm) • Travels: X630mm / Y600mm / Z650mm • Spindle speed: 12,000 rpm • Chip conveyor Known defects: Rapid traverse speed of the X axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring on the pallet changer is likely defective, leading to oil leakage. As a temporary fix, we installed a ball valve in between; when we need to change pallets (which is not very often), we open it manually. The machine is sold as viewed, without any guarantee or warranty. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. If you have any questions or need further information, please feel free to write us a message or call us.

Condition: excellent (used), Year of construction: 2012, Technical specifications: 5-axis machine: X, Y, Z, C, B Travel distances (X/Y/Z): 500 / 450 / 400 mm Travel range B axis: +110/-5° Kdodpfxjyzzpvj Ag Iol Travel range C axis: 360° CNC control: SIEMENS 840D Table width: 500 mm Table diameter: 630 mm Table angle adjustable in degrees Max. workpiece weight: 200 kg Number of tool changer positions: 30 Spindle speed: 20 – 10,000 rpm Motor power: 13 kW Dimensions (L x W x H): approx. 3400 x 2550 x 2200 mm Machine weight: approx. 4.8 t Additional equipment: Workpiece measuring probe Chip conveyor Condition: Very good condition, little used, approximately 12,850 operating hours

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 540 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 5, This 5-axis DMG Mori Seiki LaserTec 50 was manufactured in 2019. It features a Celos with Siemens 840D sl Operate control, integrated ytterbium cw fiber laser, and a compact design with a 4 m² footprint. Ideal for machining diamond tools with dimensions up to Ø 355 mm and 420 mm in length. If you are looking to get high-quality laser machining capabilities, consider the DMG Mori Seiki LaserTec 50 machine we have for sale. Contact us for more information. • Control: CELOS with Siemens 840D sl Operate; 21.5" ERGOline Control with multi-touch screen • Processes: Laser fine cutting, laser drilling, laser welding • Work capacity: Machining diamond tools up to Ø 355 mm and 420 mm in length • Axes/table: NC swivel rotary table; 5-axis transformation; high-dynamic torque motors in B and C axes • Drives: Linear drives in X/Y with acceleration > 1 g • Laser source: Integrated ytterbium CW fiber laser; 450 W QCW ytterbium fiber laser with 4,500 W pulse peak power and 450 W average power • Processing head: 80 mm focal length; collision switch Ksdpfxeyfv Tve Ag Isdl • Vision: Camera through beam path for fiber laser • Construction: Solid mineral cast base • Footprint: Approx. 4 m² • Condition/usage: ~100 working hours (as new) • Notes: CNC precision laser machine with high-speed processing; highly dynamic and precise Additional equipment • Fanuc robot automation • Keller automatic extraction system • Basement exhaust extraction system

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3s MORI SEIKI SV-50s was manufactured in 1997. The CNC milling machine is in good working condition and has been used only a few times for prototype work. It features a FANUC spindle with a speed of 10,000 rpm and a tool changer with 30 positions. Consider the opportunity to buy this MORI SEIKI SV-50 vertical machining centre. Contact us for further details. • Condition: Used, in good working condition; reportedly used only a few times for prototype work • Spindle: FANUC (as provided) • Tool changer: 30 positions • Table dimensions: approx. 270 x 250 x 230 mm (to be reconfirmed) Additional equipment • Chip conveyor (based on visual confirmation only) • Tool cabinet / cabinet with tooling • Machine vice (based on visual confirmation only) • Approx. 15 tool holders with collet chucks (based on visual confirmation only) • Elastic collets • Approx. 20 milling cutters, various sizes (based on visual confirmation only) • Dial indicator (noted twice; included once) Kodpfx Agoyk Awfj Ijdl

Condition: good (used), Year of construction: 1998, CNC Vertical Machining Center MORI SEIKI SV500-50, Year 1998, Fanuc MSC-518 Control With pallet changer. Table: 1100x600mm BT50 spindle mount, 40-position magazine. Spindle speeds up to 6,000 rpm Travels: X800, Y510, Z510, Rapid traverse 32 m/min Machine without magnetic chipboard. Kjdpfx Aowifzlog Isdl Complete machine documentation available.

Condition: good (used), Year of construction: 1997, CNC Vertical Machining Center MORI SEIKI Type: SV500-50 Year 1997 Fanuc MSC-518 Control Table: 1100 x 600 mm Travel: X 800 - Y 510 - Z 510 mm Rapid traverse 32 m/min Spindle mount: BT50 Kdsdpfowa Nvujx Ag Isl Spindle speeds up to 6000 rpm Complete documentation available. A clamping magnet is not included in the machine delivery. For further information, see data sheets:

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, operating hours: 25,350 h, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 120, number of spindles: 1, spindle nose: BT50, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, Tool breakage option included 7-pallet carousel NC FANUC MF-M6 Ksdpfxotqfk Nj Ag Ijdl

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,900 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 73 kVA, torque: 302 Nm, controller manufacturer: Fanuc, controller model: MGS-501, workpiece height (max.): 900 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 2,770 mm, total length: 4,900 mm, total width: 2,595 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 8,000 rpm, overall weight: 13,200 kg, operating hours of spindle: 35,000 h, distance table center to spindle nose: 100 mm, number of spindles: 1, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 120 mm, tool weight: 30 g, input voltage: 380 V, type of input current: three-phase, tool holder type of tool turret 1: ISO 50, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is fully functional. It is currently in operation machining parts. A visit and live demonstration while machining workpieces is possible. Ksdsyuxakjpfx Ag Iedl

Condition: used, Year of construction: 2008, operating hours: 36,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 640 mm, rotational speed (max.): 12,000 rpm, spindle speed (min.): 12,000 rpm, operating hours of spindle: 36,000 h, number of spindles: 1, input voltage: 400 V, Mori Seiki VS10000 2008 Control & Interface NC System FS-18iMB (MAPPS 3) CRT Size 15 Inch Software Languages English (NC, PC, MAPPS, Warning) Kdjdpfoyi Ic Dsx Ag Ijl Electrical Power Factory Voltage 380 V - 480 V Frequency 50 Hz Step-Down Transformer Provided (with Cable) Physical Travels X-Axis Travel 2050 mm Y -Axis Travel 1000 mm Z-Axis Travel 600 mm Spindle Specs Spindle Speed 12,000 min⁻¹ Spindle Taper 7/24 Taper No. 40 Retention Knob MAS 90 Degree Tooling & ATC Tool Storage Capacity 40 Tools Offset Pairs 64 Pairs Custom Variables 82 Common Variables Coolant & Chips Coolant Tank 800 L (Water-Soluble) Chip Conveyor (Out) Scraper (Drum Filter Type) Chip Conveyor (In) Provided Measurement Work Probe (Spindle) Renishaw Optical Probe Work Probe (Table) Renishaw MP4 Touch Sensor Location - Israel ready for inspaction

Condition: good (used), Year of construction: 2017, operating hours: 5,558 h, load capacity: 5,000 kg, lifting height: 4,030 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, mileage: 5,558 km, Electric triplex forklift, brand Still (Germany), year of manufacture 2017. Capacity 5,000 kg. Lifting height 4,030 mm. Overall height 2,250 mm. Equipped with: FREELIFT, sideshift, and fork positioner; 5,558 operating hours. Fork length 2,200 mm. Battery from 2022 with external charger. Kdedpfx Ajylb Tbjg Ijl

Condition: good (used), Year of construction: 2019, operating hours: 3,276 h, load capacity: 5,000 kg, lifting height: 5,380 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, empty load weight: 7,700 kg, mileage: 3,276 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2019 Capacity: 5,000 kg Lifting height: 5,380 mm Overall height: 2,600 mm Equipped with: FREELIFT and SIDESHIFT ONLY 3,276 hours NON MARKING tyres Battery from 2019 with external charger Kdedjx Hyuzspfx Ag Iel

Condition: good (used), Year of construction: 2018, operating hours: 4,548 h, load capacity: 5,000 kg, lifting height: 4,080 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, empty load weight: 7,500 kg, mileage: 4,548 km, Electric duplex forklift Brand: Still (Germany) Year of manufacture: 2018 Capacity: 5,000 kg Lifting height: 4,080 mm Overall height: 2,850 mm Equipped with sideshift Equipped with fork spreader 4,548 operating hours Fork length: 2,200 mm Battery from 2018 with external charger Kodpfxoy R Akme Ag Isdl

Condition: good (used), Year of construction: 2020, operating hours: 6,839 h, load capacity: 5,000 kg, lifting height: 6,280 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, empty load weight: 8,000 kg, mileage: 6,839 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2020 Capacity: 5,000 kg Lifting height of 6,280 mm Passage height 3,000 mm Equipped with: FREELIFT, SIDESHIFT, and FORK SPREADER 6,839 operating hours Battery Automatic filling system with external charger Watch the video on YouTube Kodpfxoy R Adme Ag Ijdl

Condition: good (used), Year of construction: 2018, operating hours: 9,789 h, load capacity: 5,000 kg, lifting height: 4,080 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, empty load weight: 7,500 kg, mileage: 9,789 km, Electric duplex forkliftBrand: Still (Germany)Year of manufacture: 2018Capacity: 5,000 kgLift height: 4,080 mmOverall height: 2,850 mmEquipped with: SIDESHIFTEquipped with FORK SPREADER9,789 operating hoursFork length: 2,200 mmBattery from 2018 with external chargerWatch the video on YouTube Kodpfxoywamro Ag Isdl

Condition: good (used), Year of construction: 2006, operating hours: 3,065 h, load capacity: 5,000 kg, lifting height: 3,180 mm, fuel type: electric, mast type: duplex, construction height: 2,375 mm, mileage: 3,065 km, Electric duplex forklift Brand: Still (Germany) Year of manufacture: 2006 Capacity: 5,000 kg Lifting height: 3,180 mm Clearance height: 2,375 mm Equipped with: sideshift Equipped with THIRD VALVE ONLY 3,065 operating hours Battery from 2019 automatic filling system with external charger Kdjdpfxsy Iwmke Ag Isl

Condition: ready for operation (used), Year of construction: 1969, Immediately available ex location: Hydraulic Vertical Honing Machine Nagel Type VS 8 – 50 / S Year of manufacture: 1969 Honing diameter: 10 – 120 mm Honing length: 10 – 750 mm Table clamping surface: 920 x 350 mm Throat depth: 440 mm Automatic feed Complete set of honing tools, honing heads from 10 – 120 mm, honing mandrels, clamping pots Spindle drive: 4 HP Spindle rotation: 3 HP Kodpsy Tmuzsfx Ag Iodl Weight: 5 tons Priced at EUR 4,500.— plus VAT ex location

Condition: good (used), Year of construction: 2018, operating hours: 3,595 h, load capacity: 5,000 kg, lifting height: 5,980 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, empty load weight: 7,500 kg, mileage: 3,595 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2018 Capacity: 5,000 kg Lifting height: 5,980 mm Overall height: 2,800 mm Kdsdpfx Agey A Eu So Ijl Equipped with: - Sideshift - Fourth hydraulic function - Only 3,595 operating hours - Non-marking tyres - 2018 battery - Automatic fill system - External charger Watch the video on YouTube

Condition: as good as new (ex-display), Year of construction: 2014, overall weight: 98 kg, total height: 4,950 mm, total width: 5,100 mm, total length: 7,300 mm, Vacuum dryer VS-50 C Internal dimensions (LxHxW) in mm: 405x340x370 Wattage: 230 V 50/60 Hz. 1.52 KW Kedpfx Agoqmm Npo Isdl Additional shelf 1 pc. The machine is from 2014, but has never been used. Suitable for drying processes at temperatures up to 200°C with connection for a vacuum pump. The vacuum pump is not included. Further technical data can be found in the technical data sheet. A total of 3 shelves are available.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. Ksdpfjy N N Suox Ag Iedl TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: good (used), Year of construction: 2010, 660mm turning diameter, 983mm turning length, Max distance between centres 1500mm. +/-210 mm Y Axis, C Axis 0.001 degrees on both spindles, 3,000rpm Spindle speed. 80mm bar capacity. Main spindle 22Kw, 12,000rpm turn mill spindle, +/-120 degrees on B axis milling spindle. Milling power 18.5Kw, Kedpfx Ajy Hiibog Ijdl 100 Station Toolchanger, Capto C6 milling spindle, hydraulic steady, coolant, Tool setter, Hobbing function to spindle 1, Mori seiki MSX-701IV control.

Condition: used, Year of construction: 1998, x-travel 1.020 mm y-travel 510 mm z-travel 510 mm control MSC 501 Fanuc table surface area (APC) 1.200 x 480 mm max. table load (APC) 550 kg turning speed range - milling 10.000 U/min power capacity - milling spindle 22 / 18,5 kW tool taper BT 40 number of toolpositions 30 pos. tool taper BT 40 max. tool diameter 80 mm Kodpfjy Apcysx Ag Ijdl max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse 32 m/min feed 1 ~ 16.000 mm/min Tipp feed 0 ~ 1.260 mm/min spindle bearing diameter 85 mm total power requirement 59,5 kVA weight of the machine ca. 6,9 t dimensions of the machine ca. 3,9 x 2,7 x 2,9 m CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT included in the scope of delivery

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV Kdsdpfex R Enbjx Ag Iel max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 530 mm z-travel 510 mm Control MSC 504 Mori Seiki turning speeds max. 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle bearing diameter 70 mm distance spindle /table 150 - 660 mm table surface area 1.100 x 600 mm max. table load 800 kg T-slots 6x 18 mm table height over floor 900 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool 1,3 sec change-time chip to chip 4,1 - max. 9,2 sec rapid traverse ( X / Y / Z ) 36 / 36 / 20 m/min feed speeds max. 6.000 mm/min Tipp feed 1 - 5.000 mm/min total power requirement 27 kVA Kdjdpfjx R Emwox Ag Isl weight of the machine ca. 6,1 t dimensions of the machine ca. 3,5 x 3,0 x 2,8 m CNC - Machiningcenter Vertical MORI SEIKI - DuraVertical 5080 -038

Condition: used, Year of construction: 2008, turning diameter max. 320 mm turning length 810 mm control MSX 701 MAPPS III standard turning dia. 200 mm Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive Ksdjtqmqwepfx Ag Iedl - incl. 28x collets - incl. Hainbuch changing device