Used Horizon Sc-200 for sale (25,082)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) Fpodowc Rk Eepfx Aayel The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: used, Horizon GFB-56 Gate Fold Buckle Fpjdpfxjw Ewpte Aayel The Horizon GFB-56 Gate Fold Buckle is a premium solution for precise gate folding, known for its easy installation and high compatibility with various Horizon folding machines. Key Features - Easy Installation: The GFB-56 can be set up quickly without requiring specialized knowledge - Precise Folding: Ensures exact gate folds - Compatibility: Compatible with the following Horizon folding machines: AFC-566FG | AFC-566A | AFC-564A Specifications - Maximum Sheet Size: 540 x 360 mm - Minimum Sheet Size: 160 x 100 mm - Inlet Height: 570 - 970 mm - Performance: Up to 20,000 cycles per hour, 230 m/min - Power Supply: 230V / 50Hz, 0.7 kW - Dimensions: 1,060 x 750 x 1,300 mm - Weight: 14 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price

Condition: used, LCV-54 Horizon Stream Delivery, used The Horizon LCV-54 Stream Delivery is an efficient and precise solution for stacking folded printed products, specifically designed for use with Horizon folding machines. Key Features Fpodpfxew Ew Ame Aaysl - Stream Delivery: The LCV-54 provides consistent and orderly stacking of folded products, facilitating further processing and increasing efficiency - Height Adjustable: Flexible adjustment of the inlet height allows for optimal integration into various production environments - Wide Compatibility: The LCV-54 is compatible with all Horizon AFC-5xx folding machines Specifications - Inlet Height: Maximum: 911 mm; Minimum: 429 mm - Format Range: Minimum: 128 x 148 mm; Maximum: 558 x 850 mm - Machine Speed: Up to 240 m/min

Condition: used, Transfer Bridge, Horizon SPF-CV, Used The Horizon SPF-CV is a small but essential connecting component specifically designed to link collators from the VAC series (e.g. VAC-100a or VAC-600) with bookletmakers from the SPF series (e.g. SPF-20 or SPF-20A). It enables seamless transfer of paper stacks between machines, ensuring a smooth production flow. Key Features: - Efficient transfer: Connects the collator and bookletmaker for continuous production - Compact design: Space-saving for easy integration into existing production lines - Robust construction: Durable and reliable for long-term use - Compatibility: Developed for use with Horizon VAC collators and SPF bookletmakers Fpedsw Ewpyjpfx Aaysl Technical Specifications: - Compatible models: VAC series (e.g. VAC-100a, VAC-600), SPF series (e.g. SPF-20, SPF-20A) All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, 3 MONTHS LA-POSTPRESS WARRANTY except electronics offer consists of: Fpjdpfx Aow Ewz Aeaysl long delivery unit LC-20

Condition: used, Horizon PK-30 Preset Kicker, used Fedpfsw Ew Atex Aayjpl This small device has the following functions for various Horizon booklet making systems: - It separates a batch of booklets at a preset number - According to a preset number, a booklet is shifted to easily identify and separate the end of a series - The PK-30 Preset Kicker can be used with various Horizon systems, including the StitchLiner 5500 or StitchLiner 6000

Condition: used, We offer for sale a Horizon AFC-744S Cross Folder in used working condition. The machine is currently installed in a printing facility and is available for inspection. It is suitable for professional post-press production and high-quality folding work. Fodpfszfivvjx Aayjpl Machine details: Manufacturer: Horizon International, Inc. Model: AFC-744S Cross Folder Serial No.: 354002 Configuration: 4 folding cassettes + knife + cassette + knife Maximum sheet size: 738 × 1100 mm Minimum sheet size: 210 × 297 mm Power supply: 400V, 3-phase, 50/60Hz Made in Japan Condition: The machine is in used working condition. It has been installed in a production environment and shows normal signs of use. Available for inspection before purchase. Included: Horizon AFC-744S folding machine 4 folding cassettes Cross-folding knife unit Additional cassette and knife section Feeder and delivery system as shown in the photos Control panel / operating screen Additional information: The machine is sold as shown in the photos. Dismantling, loading, transport and installation are not included in the price unless agreed separately. For more information, additional photos, video of the machine in operation, or to arrange an inspection, please contact us.

Condition: used, Year of construction: 2015, HORIZON VAC-100 Booklet Making System – 5 Towers / 50 Stations Manufacturer: Horizon Model: VAC-100a + VAC-100m × 4 Towers Year of Manufacture: 2010 Fpsdpszyfvuefx Aayol Number of Towers: 5 Towers Number of Stations: 50 Bins * Finishing System: ST-CV Conveyor ST-40 Stacker SPF-200A Stitcher & Folder HP-200A Punch Unit FC-200A Trimmer LC-200 Long Conveyor PK-30 Preset Kicker Year of Finishing Units: 2015 * Machine Configuration: VAC-100a + VAC-100m × 4 + ST-CV + ST-40 + SPF-200A + HP-200A + FC-200A + LC-200 + PK-30 * Main Functions: Suction-feed collation Automatic booklet making Stitching and folding Hole punching Trimming Condition: Used, inspected, and serviced Availability: Available immediately Location: JCM Corporation showroom, South Korea Packing: Vacuum-packed and export-standard wooden cases

Condition: ready for operation (used), sheet width 2025 mm plate thickness 3.0 mm distance between columns 2050 mm no. of strokes 38 Hub/min cutting angle 1.38 ° Control konv. total power requirement 4.0 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge Fodpezzrfljfx Aayopl * Infinitely variable adjustment range * Adjustment from the rear - via handwheel * Includes mm scale - 1x side stop - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left

Condition: ready for operation (used), GMN TSE 75 cdu x 200 high-speed spindle, SP: 12-18-30000 RPM, serial number: R336458, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fpsdpfx Aaoi Eaa Hjysl

Condition: used, Second-hand machine Fedpfxezk Nkke Aayjpl Condition: as new Specifications and technical details to follow

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Fpjdpfxey Exqlo Aayel Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Condition: used, Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 9615, total length: 31,200 mm, total height: 2,300 mm, total width: 4,600 mm, overall weight: 9,000 kg, Equipment: rotational speed infinitely variable, safety light barrier, SC3-200-5 fully automatic cutting system Fsdpfx Aajzyihueyopl Angle and inclination drive for the sawing station Automatic infeed system Feed cross conveyor (6 strands, wood length up to 14 m) Component support for small cross-sections Control unit for waste disposal Conveyor belt for waste disposal (integrated) 6-arm stacking table (wood length up to 10 m) Combination support for vertically operating tools 2x Vertical drilling unit 2.2 kW 2x Vertical chain mortiser 5.5 kW Additional combination support, vertical, for rotary milling cutter Rotary milling head 7.5 kW Combination support for horizontally operating tools 2x Horizontal drilling unit 2.2 kW Marking device, rear Marking device, bottom Marking device, front Angled conveyor, right

Condition: used, Year of construction: 2013, operating hours: 4,657 h, Equipment: all wheel drive, * Enclosed cab * Load sensing shut-off * Rear-view camera * Air conditioning Fsdpfx Ajzxaxbeayjpl * CD radio ----Vehicle number 12423 ----Errors and prior sale excepted

Condition: good (used), Year of construction: 2007, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm Fpodpjzzc T Hofx Aayjl - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: like new (used), Year of construction: 1994, functionality: fully functional, HOFFMANN HT 200 Dowel and Slot Drilling Machine Fpjdpfx Aeyy Rtzoayol In very good condition, this machine comes from an educational institution, has been used very little, and is in absolutely like-new condition; it has only very few signs of wear. It can be used to mill slots and drill dowel holes; the drilling height can be read very precisely on a digital counter. Comes with 3 drill chucks: for drills with an M10 external thread and for drills with 12mm and 16mm shanks. With workpiece support rests on the left and right sides, which are pivotable and have a support roller. The machine has a chassis. With 2 angle stops on the machine table for left and right. The clamping arms are reversible and adjustable. 380V, 1400 and 1800W through the 2 speed ranges. 1400 and 2850 rpm. Year of manufacture: 1994 Weight: approx. 280 kg With this machine, you can mill slots for, e.g., lock cases and similar items, or produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. The drilling unit can be pivoted on both sides up to 65° and has a detent at 0°; this allows the machine to also be used to drill handrail posts into staircase stringers. The 2 speed ranges allow drills with large diameters to be used without overheating during drilling. Due to the detents and stops and the machine's design, dowel joints can be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. Workpiece clamping is done with 2 pneumatic clamping cylinders via a foot pedal. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled quickly and accurately. Comes with a precision 12mm guide rail with a center detent and 13 detents on the left and right. Working travel in width: max. 330mm The max. borehole height is 90mm. The max. borehole depth is 200mm with stop. The max. workpiece height is 150mm. Everything functions perfectly. Comes with manual. We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; delivery to Austria and other countries is also possible upon request. The machine table is 1100mm wide and 250mm deep. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are in good condition and move smoothly; the pivoting mechanism is also very smooth due to a ball bearing; locking is possible with a locking screw.

Condition: used, mileage: 20,050 km, power: 55 kW (74.78 HP), first registration: 11/2021, fuel type: diesel, driver cabin: other, gearing type: other, Year of construction: 2021, operating hours: 2,532 h, number of seats: 2, Equipment: air conditioning, * Compact sweeper Swingo 200+ Basic - push-type 2-brush system * Hydro-pneumatic suspension * 4-wheel steering (4WS) switchable * 2 brushes D=850mm * Rotating beacon (non-folding) * Pressurized water system with dirty water pump * 2 work lights on the cabin roof and 1 LED work light for the suction nozzle * Air conditioning * Cruise control * Warning triangle, first aid kit, safety vest - according to EN 471 * Swingo transport speed 50 km/h - including additional disc brake system on the rear axle * Folding rotating beacon * Wheel chock with holder * Engine: VM R 754 ISE 5 - EuroMot 5 - 4-cylinder - 55 kW (75 hp) EuroMot5 homologation incl.: DOC + DPF (Diesel Oxidation Catalyst + Diesel Particulate Filter closed system) * 500-hour service interval (instead of standard 300 hours) with special ASH Long Life oil * Hydropneumatic comfort suspension on front and rear axles - front and rear axle suspension via hydraulic cylinders and nitrogen accumulators - high driving comfort and best driving safety. Note: System is not maintenance-free * Air-suspended driver's seat including headrest * 3-point safety belt for driver - mounted on the cabin rear wall - Option 174590 Headrest for driver's seat is required * 2-point belt (lap belt) for passenger * DAB+ radio, CD, MP3, USB connection and Bluetooth hands-free system * Rear area monitoring with monitor and camera * Camera for suction nozzle monitoring * Reversing warning signal can be switched off (night mode) Fsdpfx Aaszcfytsyspl * Steering wheel knob * 12V socket (cigarette lighter socket) in the cabin (max. 15 A) * Professional plate brush control for 2-brush system (independent control) * C-shaped brush arms for 2-brush system * Mixed brush bristles (steel / poly-plastic) * Coarse dirt flap rubber in the suction nozzle made of 17mm material instead of 10mm * Preparation for subsequent installation of the hand suction hose * Standard paint finish RAL 9016 white * LED rotating beacon (instead of the standard rotating beacon) * Manual central lubrication, all lubrication points combined on two blocks Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Errors, changes and prior sale reserved. * Offer is subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: used, empty load weight: 10,920 kg, maximum load weight: 27,080 kg, overall weight: 38,000 kg, first registration: 05/2017, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65R22,5, color: white, gearing type: other, front tire size: 385/65R22,5, rear tire size: 385/65R22,5, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, Chereau deep-freeze semi-trailer with Thermo King SLXi 200, model "Fleischer" - Refrigeration unit: Thermo King SLXi 200 - "Fleischer" model - Electrical system - Dimensions (L x W x H): 13.40 x 2.48 x 2.62 m - Disc brakes - Temperature recorder - BPW axles - FRC/ATP tires: 385/65/22.5 - Pallet box Very good condition, export price. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our listings, as this is independent of the location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is updated regularly. This information is to be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typos and prior sale. Fsdpezrpb Ejfx Aayepl Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Year of construction: 2020, condition: excellent (used), functionality: fully functional, LICHTER LRK 200 PVC PIPE HEAD, FOAM CORE PIPE HEAD - THREE-LAYER Application: PVC foam core pipes or PE multi-layer pipes Suitable for KG-U PVC pipes and PE pipes Accessories: Tools for producing pipes with diameters from 100 mm to 200 mm The pipe head was used very little due to the closure of the business. Condition: in very good condition Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn-Grabstede, Bahnhofstraße 6 Fjdpsyxtnrefx Aayspl Germany

Condition: excellent (used), Bosch Turbo Scara SR6 Swivel-Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideal for assembly work and fast pick-and-place movements. Fsdehtrdcepfx Aayepl The turboscara SR6 and SR8 are swivel-arm robots (SCARA robots) with four axes and offer the following advantages: • Minimal cycle time with maximum precision • Large workspace and various strokes • Defined mechanical interfaces • PC control with diverse communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and enables the creation of clear and understandable programs; New with BAPSplus: graphical user interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation Technical specifications: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (axis 4) 500 kgcm² Maximum moment of inertia: (axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (Axis 4) continuous/maximum 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Control system consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch Maximum pressure 8 bar Maximum load 8 kg Robot weight 51 kg + Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see image Since multiple copies of this item are available and the robots use different tools, these are only sample images and may vary. Item condition: Used (Subject to changes and errors in the technical data, information is subject to change!) In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. Fjdehbhyuspfx Aayspl Workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving are plentiful. A total of 24,000 m² of production space is being demolished and sold. Please also check out our other offers. After purchase, the amount is due within 7 business days. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, empty load weight: 10,920 kg, maximum load weight: 27,080 kg, overall weight: 38,000 kg, first registration: 05/2017, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65R22,5, color: white, gearing type: other, front tire size: 385/65R22,5, rear tire size: 385/65R22,5, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, Chereau deep-freeze semi-trailer with Thermo King SLXi 200, model "Fleischer" - Refrigeration unit: Thermo King SLXi 200 - "Fleischer" model - Electrical system - Dimensions (L x W x H): 13.40 x 2.48 x 2.62 m - Disc brakes - Temperature recorder - BPW axles - FRC/ATP tires: 385/65/22.5 - Pallet box Very good condition, export price. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our listings, as this is independent of the location of use. Fpedpfszp Ruhsx Aaysl Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is updated regularly. This information is to be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: good (used), Year of construction: 2002, Pig slaughterhouse, approx. 200 animals/hour. Location: 26215 Wiefelstede/ Germany The plant has been disassembled into individual parts. -consisting of the following components: -1): 1x Rider seat retainer with automatic cardiac/brain anesthesia, Banss color, type LVR-8940L -2): 1x bleeding plate conveyor, make Banss, type EFB -4): 1x plate conveyor type PB-1500 -5): 2x flame/hygiene flame oven, make Banss, type BF2 -6): 1x Dry whipping machine, manufacturer Banss, type T3S -7): 1x Whip washing machine, manufacturer Banss, type AW -8): 1x Pre-wash machine, manufacturer Banss, type V3S -9): 1x condensation brewing tunnel, make KBT-220 -10): 1x Continuous hair removal machine, manufacturer Banss, type 300-2/1 -11): 1x cable lot -12): 1x bleeding and brewing tunnel conveyor -13): 1x internal conveyor -14): 1 Slaughter conveyor -15): 1x PLC controller, manufacturer Siemens, type S7-414-2DP -16): 1x Weighing rail conveyor, manufacturer Banss, type WSF560 Li -17): 1x evaluation terminal, manufactured by Bizerba, type Banss, type ST(SWE) -18): 1x overhead conveyor scale, manufacturer Bizerba type ST(NSW) -19): 1x empty hook conveyor system for slab conveyor, manufacturer Höcker -20): 1x steam generator, manufacturer Certuss, type Universal 1300 oil -21): 1x intestinal feces separator, make Itec, type 300 -22): 1x rotary lobe pump, manufacturer Itec/Vogelsang, type VX136/186Q -23): 1x pump for bowel transport -24): 1x Typhoon packaging transport system for raw meat, manufactured by MariMatic, type E0800-150-200FB -25): 1x ejector, manufacturer MariMatic, type TF852 -26): 1x separator, make MariMatic, type 200 L -27): 6x suction points with slide valve, manufactured by Stafsjö, type DN150 Fpjdpfx Aoh Db Hcoayol -28): 1x shaft cabinet, manufacturer MariMatic, type S5-200 -29): 1x car marker, make Carometec Food Technology -30): 1x Item Box Stall -31): 1x lot of pipework -32): 1x Item of drawings/operating instructions, circuit diagrams -34): 1x supporting structure Individual components can be sold separately; please inquire.

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears, sheet metal shears, profile steel shears, hand lever shears Fpsdpfx Aajx Ehlpoyjl -Manufacturer: VEB, Hand lever scissors type ScDH 5 -Cutting insert length: 200 mm -Cutting capacity: 5/7 mm -Lift-down device: infinitely adjustable -Dimensions: 470/120/H1270 mm -Weight: 28.1 kg

Condition: good (used), Hand lever shears, long knife, sheet metal and round steel shears, lever shears -Mubea: sheet metal and round steel shears -Cutting insert length: 200 mm -Dimensions: 380/160/H1240 mm -Weight: 22 kg Fpodpfefgi Nmex Aayel