Used Hot Air Welding Machine for sale (87,937)

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Knsdpfx Asmrrwfeqiob Please note that the photos probably show two different ovens, both are very similar.

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC Knedpjhpf Iyjfx Aqisb AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Ksdozd Rmgepfx Aqisnb Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Knodpfx Aoyzxgfeqiob Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: excellent (used), WSK Intermarking Fritz Wagner Type 1164 – hot stamping / foil gilding machine Kjdpfx Aqeziqtdjienb

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central fume extraction system Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62187 Year of construction 2014 Nominal volume flow 3000 m³/h Nominal volume flow 50 m³/sec Filter area 27 m² (9 pieces, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Kjdpoz Db Nisfx Aqienb Mains connection 400 Volt, 50 Hz - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control - Control cabinet mounted on the extraction system - 9 filter cartridges, Type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter replacement - Radial fan installed on the top inside, Type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Firewater connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Kodpfx Aqezx D Tcjionb Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control Knjdpfetubz Uex Aqieb  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Ksdpfxozuxn Te Aqienb Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Capacitor discharge welding machine MEGATRONIC, type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimal welding times. Spot and projection welding machine The CD (Capacitor Discharge) welding technology works according to the principle of transformed capacitor discharge. Year of manufacture: 1993 Very high welding performance with a relatively small mains connection. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat-sensitive components - welding of steels with high carbon content - welding of surface-coated workpieces Rated power: 12288 Ws Uc: 3200 Volt Capacity: 2400 µF Open-circuit voltage: 10 Volt Electrode force: 200-2000 daN, continuously adjustable Operating air pressure: 6 bar Mains fuse: min. 35 Amp. Operating current: 32 Amp. Mains connection: 400 Volt, 50 Hz Ksdpfxoguvtdo Aqisnb - Programmable control unit megapuls CD-12000 - Parallel electrode guidance - Electrical 2-hand control panel located beside the machine - Control cabinet with control unit fixed to the machine Weight: 3000 kg Good condition

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Kjdpfsrl S Ufsx Aqisnb Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, type of input current: three-phase, total height: 1,420 mm, total width: 560 mm, total length: 1,100 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 100 kg, warranty duration: 12 months, type of cooling: water, hose package length: 4,000 mm, electrical fuse: 32 A, DGUV certified until: 08/2027, welding power (max.): 19 kVA, open-circuit voltage: 61 V, welding current at 60% duty cycle: 470 A, welding current at 100% duty cycle: 420 A, space requirement height: 1,770 mm, space requirement width: 600 mm, space requirement length: 1,250 mm, input current: 30 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 500 A, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, We are offering this Böhler Welding TERRA NX 500 PME Rockstar welding machine, a showroom model from 2025, for sale. The package includes a wire feeder, a 1.5m intermediate hose set, a 4m UP/Down welding torch, and a ground cable. Kodpfx Aqezvmi Ioienb If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 3,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Unused Lascentrum MIG/TIG 200 ACDC Synergic MIG & TIG ACDC for steel, stainless steel and aluminium. Ideally suited for use at home, on site, for general welding work, light steel/stainless steel/aluminium construction, and in the workshop. 5-200 AMP 230 Volt Synergic ACDC TIG Pulse 2/4 Step Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Pulse Time / Pulse Frequency AC Balance / AC Frequency adjustable AC Wave adjustable Spot welding Fixed programs / Program memory Elektrode option Including: SB150 Welding torch 3 Meter SR17 Tig Welding torch Earth cable 3 Meter 35mm² Elektrode cable Gas hose Manual (If in the original packaging) Original Packaging 3 Months Warranty of Cjays The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test Welding is possible in our Workshop in Valkenswaard Knodpfszqc U Aox Aqisb Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: What is a High Shear Mixer? Ksdpfx Asy E Hy Uoqionb A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Kedpfx Aey N Duqoqisnb Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, functionality: fully functional, machine/vehicle number: 199715, input voltage: 380 V, T-joint welding machine IDEAL. We only used it to weld a single product in small quantities. We don't know its history before that (almost 30 years ago), as we acquired the machine at a bankruptcy auction back then. Kodpfozzzgfex Aqijnb

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Including: SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Gas hose Manual (If available in the Packaging) Original packaging 3 Months Warranty Kedpszqc Aaofx Aqienb The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2010, condition: good (used), functionality: fully functional, The Branson ultrasonic welder is used for joining plastic parts without the use of joining material. Knjdpfovt Sc Ejx Aqiob Frequency 20 kHz, power 1000-2000W, voltage 230 V AC, stroke 100 mm LxWxH: 400 x 500 x 1200 mm

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Kodexxb Rrspfx Aqienb Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, MIG/MAG pulsed gas shielded welding machine, EWM, type Phoenix 301 Progress Puls Force Arc Serial No. Art. No.: Year of manufacture: 2007 Power: 300 amps = 60% duty cycle 250 amps = 100% duty cycle Kjdpfx Aqoz Afhijisnb Adjustment range: stepless Open-circuit voltage: approx. 29 volts Mains connection: 400 volts, 50 Hz, 16 amps plug - Digital display for voltage and current - Pulse function - Various welding programs selectable - 2-cycle, 4-cycle and spot welding - Water-cooled - 4-meter hose package, NEW, with central connection - Welding gas pressure regulator, NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration

Condition: good (used), MIG/MAG welding machine, MIG/MAG welding machine -Max. welding current: 320 A -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm Kodpfxeb A Hhvs Aqienb -Weight: 170 kg

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Knedpfszqucfjx Aqiob Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: used, This listing is for a MMM Stericell Hot Air Sterilizer. Good working and cosmetic condition. Knedpfxsxzg N Eo Aqieb The STERICELL® hot air sterilizer is intended for use in healthcare for the hot air / dry heat sterilization process of non-packaged and packaged medical devices, including invasive devices designed by their manufacturers for hot air / dry heat sterilization.

Condition: used, Year of construction: 2008, functionality: fully functional, Single-head welding machine Kedpfx Aqszpyfcjienb

Condition: good (used), functionality: fully functional, machine/vehicle number: BMP 6-5, throat depth: 250 mm, overall weight: 650 kg, arm spacing: 590 mm, nominal power (apparent): 80 kVA, Manufacturer: Nimak Model: BMP 6-5/80 Description: Projection welding machine Rated power: 80 kVA Max. force: 1100 daN Throat depth: 250 mm Opening: 350 - 590 mm Kodpsv N U Tlofx Aqienb Weight without control cabinet: 650 kg