Used Ipe Bg Jet 300 Mit Presse for sale (32,309)

Condition: ready for operation (used), Indramt TDM 2.1-15-300-W0 AC. Servo controller, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Lrjdei Ebryopfx Adtok

Condition: ready for operation (used), Indramat TFM 3.1-050-300-W1-220V frequency inverter MNR: R911234797 SN:23515802541, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as per photos Lrsdpsx Dw H Tsfx Adtok

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022128, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Ledpfji Ebncox Adtjrk

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022133, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Ledpfx Aoi Ebngodterk

Condition: ready for operation (used), Indramat KDA 1.1-100-300-W1-220 AC. Mainspindle Drive, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Lredpfsi Ebgyex Adtjk

Condition: ready for operation (used), Indramat TDM 1.2-030-300-W0 AC. Servo Controller, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Lodpfji Ebmuex Adtsrk

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 Controller SN:5765 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Ljdpei Ebhpsfx Adterk

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1-220 A.C. Servo Controller , serial no. according to photo ,used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Lsdpfx Adsi Ebhtstjrk

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022000, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Lsdpfoi Ebm Rsx Adtork

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022086, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Lsdpfsi Ebm Ujx Adtork

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1-220 AC. Servo controller, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Lrjdpfx Aoi Ebhwjdtsk

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC. Servo controller, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Lrodpji Ebhhofx Adtok

Condition: ready for operation (used), Indramat KDV 1.3-100-220/300-W1 Power Supply SN23226473930903, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photo Lredpji Ebi Aofx Adtjk

Condition: used, mileage: 164,056 km, power: 96 kW (130.52 HP), first registration: 06/2010, fuel type: diesel, empty load weight: 3,220 kg, maximum load weight: 2,280 kg, overall weight: 5,500 kg, axle configuration: 4x2, wheelbase: 2,500 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space volume: 3 m³, Equipment: air conditioning, cabin, * German vehicle * 1st owner * Previously owned by a municipal authority * Condition as shown in the photos * Refuse compactor body by premium manufacturer Hagemann & Partner * Model: HG 3.5 L * Side sliding doors for loading * Nominal volume: 3.5 m³ * Driver’s cab with 3 seats * Air conditioning * Electric windows * Rotating beacon * 6-speed manual transmission Lredpfxjx Urrze Adtsk * Radio CD * Wheelbase: 2.50 m * Gross vehicle weight (GVW): 5,500 kg * Unladen weight: 2,220 kg * Payload: 2,280 kg If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, WITHOUT new DGUV certificate, WITHOUT new safety inspection (SP), WITHOUT new accident prevention regulation inspection (UVV). You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and highly recommend viewing and inspecting the goods, to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided is without guarantee. We do not accept liability for errors or incorrect specifications in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: new, mileage: 20 km, power: 120 kW (163.15 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,250 mm, loading space height: 2,150 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, * Vehicle: * Renault Master by Trucks, model 2024, first registered in 2025! * 2.3 DCI 163 HP * Start/Stop system * EURO 6 (Green Environmental Badge) * 16-inch wheels (heavier version) * ABS (A/C) * DAB radio * Bluetooth * Induction charging pad for smartphones * 105L tank * Air conditioning Lredpfowbyh Dex Adtjk * Electric windows * Electric Mirrors * Central locking with remote control * On-board computer with trip computer * Reinforced shock absorbers * Reinforced wishbones * Body: * Refrigerated box with tail lift * Engine: Carrier Xarios 300GH (parking and driving cooling) * Toolbox * Aluminum side underrun protection * LED side marker lights * Lockable side door * BÄR tail lift 750 KG with roll stop * Mounting rail flush with the wall * Additional air suspension on the rear axle * Rear view camera for an additional charge If the vehicle is not in stock, short-term delivery is possible! * Ask us about a customized leasing or financing offer * Net export possible * Delivery from 199 € Didn't find the right vehicle? Configure your own vehicle! Whether it's equipment, body, or engine variant, all at a fair price! You can also purchase the body kits for your existing vehicle from us! Don't hesitate to contact us! Images may show optional equipment not included in the base price. *----*The information provided online is a non-binding description. It does not represent guaranteed features. The seller is not liable for typos or data transmission errors, changes, or input errors. Please check the accuracy of the equipment features in person on the vehicle before purchasing. Errors and prior sale excepted. This advertisement is to be understood as an invitation to submit an offer.

Condition: new, machine/vehicle number: 195f80ad09517628522e33a91, empty load weight: 7,300 kg, maximum load weight: 16,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Aluminum side bumpers Rear splash guards across the entire width Quarter-shell mudguards in front of 1st axle 1st pair of wheel recesses after cranking, recessed in the low bed in the tramline area, slanted towards the entrance, bottom length approx. 1600 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. 2nd pair of wheel recesses recessed between the axles in the low bed in the tramline area, sloping towards the entrance, bottom length approx. 600, approx. 300 mm deep. Note! Frame in main beam area 300 mm higher than wheel recess. Widenings extendable to 3,000 mm (not in rear bevel) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Widenings extendable to 3,000 mm, also in the wheel recesses below, foldable on the wheel recess extensions, (widening not in rear sloping) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of lashing cut-outs in the front side member, recessed on offset, 10 tons each 4 pairs of lashing holes in the outer frame, 5 tons each (lashing strap attachment) 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 6 x in the drop deck First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm Trailer drawbar Turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable. Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Lredsi Ri Rvopfx Adtek Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed in the drive-over slope to the offset then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6500 mm Drive-on ramps Steel ramps 2 800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to

Condition: new, machine/vehicle number: ede0610378cbe39cc4883251d, empty load weight: 24,000 kg, maximum load weight: 7,550 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction 1st pair of wheel recesses after steel platform recessed in the tramline area, inclined towards the entrance, length at the bottom approx. 1400 mm, approx. 400 mm deep. Note! Frame in main beam area 400 mm higher than wheel recess. If machines are to be driven where the overall height is to be checked, we request a technical data sheet for the machine types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses may be required by the customer). Turntable with strong ball bearing slewing ring, storage box embedded in turntable front end Folding rear support 2 wheel chocks with holder Aluminum side bumper Rear spray flaps across the entire width Widenings can be extended to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 110 3 pairs of lashing points, 10 tons each, integrated in the floor at the front Incl. 6 pairs of lashing mushrooms at the top and sides, each 10 tons, embedded in the outer frame 1 x to neck area remaining distributed in between Distance not greater than 1200 mm 1 x rear slope 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles which guarantee the effectiveness of the ABS! Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Twin steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Lrsdpfxoi Ri Rye Adtsk Front area steel floor, incl. Afterwards with 70 mm softwood floor, steel/checker plate covering in the wheel housing area Rear slope with 70 mm softwood floor Low loading area incl. rear slope 8 200 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. cannot be achieved. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany Incl. with

Condition: used, Year of construction: 2024,

Condition: used, Year of construction: 2024,

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4590x1100x2500 mm Weight 1000 kg Lrjdsvz E Iqspfx Adtjk Total power requirement 7,5 kw

Year of construction: 2021, condition: new, NIVEAU - Lifting table HS 300 midi with SCHWENKMAX - Plate swiveling device description: ᐳ mobile single scissors lifting table with plate ground frame and 4 drilling holes to receive the socket pins; 4 pieces of guide rollers, 2 of them with brake; Ø of rollers: 125 mm; operation on foot pump; load in kg: 300 weight in kg: 85 stroke in mm: 610 Lodpjb Irfcefx Adtjrk height in mm: 400 overall height in mm: 1010 sizes of platform in mm: 1200 x 740 Inclusive ! Schwenkmax - Plate swiveling frame with 2 layers of lock (vertical/horizontal) for plate weight up to 120 kg The swiveling frame can be mounted on the base frame of the HS 300 midi with a few simple steps. Even large boards can be rotated by this quipment from one person with no effort from the vertical to the horizontal position. Size of swiveling frame 1800 x 1480 mm Further optional available Accessories : * work plate beech tree Multiplex, 30 mm thick * wooden breadboard made of beech tree Multiplex, 30 mm thick

Condition: as good as new (ex-display), Year of construction: 2024, - mobile scissor lift table with sheet metal plate - The up/down stroke is actuated by a hydraulic foot pump - Load capacity 300 kg - Overall height 400 mm Lredpfjfnp Rpjx Adtek - Useful stroke 610 mm - Maximum height 1010 mm - Platform size 1000 x 600 mm - Own weight 75 kg - Swivel castor 2 pieces with brake, 2 pieces without brake - Wheel-Ø 125 mm - Powder coating of base frame and platform frame light grey RAL 7035, scissors in violet blue RAL 5000

Condition: new, empty load weight: 7,583 kg, maximum load weight: 14,417 kg, overall weight: 22,000 kg, axle configuration: 1 axle, loading space length: 11,016 mm, total length: 2,490 mm, total width: 2,480 mm, suspension: air, rear tire size: 275/70 R22.5, Equipment: ABS, Krone SE refrigerated semi-trailer | Single-axle trailer with turntable steering | Tires 275/70 R22.5 | TK SLXi 300 | Electric and diesel deep-freeze unit | Dhollandia DHLM 2000kg tail lift | Twin tires | Internal dimensions: Height: 2.48m Width: 2.49m | Subject to errors, input mistakes, and prior sale Lrsdpfx Ajxmiydsdtsk

Condition: new, Year of construction: 2026, pressing force: 300 t, stroke length: 60 mm, table width: 400 mm, table length: 4,200 mm, stroke adjustment: 100 mm, warranty duration: 24 months, Equipment: safety light barrier, Our presses and feeding lines, designed for the door and window accessories industry and featuring both dual and single operation modes, guarantee maximum efficiency and reliable operation for many years. In the window accessories sector, where high-volume production is essential, our presses—combined with our extensive experience—ensure maximum customer satisfaction. - Pressing force up to 400 tons - Table length up to 6000 mm - Choice of 2 or 3 connecting rods - Automatic, continuous fine lubrication with return - Use of progressive lubrication block - Accessible from both rear and front - Sliding covers with magnetic sensors - Induction-hardened and ground gears - Gear-hub connections using tapered lock system PRESSURE: 300 TON SPEED: 40-70 RPM Lrsdpfx Adexrbn Rotjk STROKE: 60 MM MAXIMUM DIE HEIGHT: 340 MM TABLE-RAM HEIGHT: 400 MM ADJUSTMENT: 100 MM UPPER TABLE SIZE: 400x3000 MM LOWER TABLE SIZE: 400x4200 MM MOTOR: 22 KW MOTOR SPEED: 3000 RPM

Condition: new, Year of construction: 2025, pressing force: 300 t, table width: 900 mm, table length: 1,200 mm, drop-through hole in table: 260 mm, ram adjustment: 150 mm, stroke adjustment: 200 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) Lsdpfx Aovyr Eaodtsrk o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 300 Tons Table-Ram Distance 530 Mm Distance Between Walls 1280 Mm Ram Adjustment 150 Mm Press Approximate Width 1700 Mm Press Approximate Depth 2200 Mm Press Approximate Height 3500 Mm Table Hole Diameter 260 Mm Table Size 900 / 1200 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 1000 Mm Stroke Adjustment 20 / 200 Mm Stroke Number/Minute 38 Pcs/min. Engine Power 30 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 18,000 Kg